Microstructure and mechanical properties of Inconel-625 slab component fabricated by wire arc additive manufacturing
Source abstract
Abstract
Wire arc additive manufacturing is a promising reliable free-form fabrication technique suitable for producing large-scale components that feature a very low buy-to-fly ratio. This research work is aimed to fabricate a rectangular prototype Inconel-625 alloy slab using a robotic metal inert gas welding system. The microstructure and mechanical properties of as-deposited and solution-annealed (SA) alloys were investigated. It was found that the as-deposited alloy exhibited a columnar dendritic structure and the presence of intermetallic phases such as the Laves phase, NbC and carbides were observed in the gamma-nickel matrix. In SA deposit, the intermetallic phases were dissolved in the NiCr-matrix and the secondary carbides M 23 C 6 , M 6 C were also observed in the microstructure. It was found that the ultimate tensile strength and microhardness of the as-deposited alloy were higher than that of SA deposit.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Robotics and Automation Engineering, PSG College of Technology, Coimbatore, India
Schlumberger-Cameron Manufacturing India Pvt. Ltd., Coimbatore, India
References (26)
Show source-provided references
1. 10.1016/j.msea.2016.09.01510.1016/j.msea.2016.09.015 ↗
2. 10.1016/j.jallcom.2011.10.10710.1016/j.jallcom.2011.10.107 ↗
3. 10.1016/j.jmapro.2016.12.01810.1016/j.jmapro.2016.12.018 ↗
4. 10.1016/j.ceramint.2017.03.19410.1016/j.ceramint.2017.03.194 ↗
5. 10.1016/j.msea.2009.01.00910.1016/j.msea.2009.01.009 ↗
6. 10.1016/S0924-0136(02)00867-110.1016/S0924-0136(02)00867-1 ↗
7. 10.1179/1743280411Y.000000001410.1179/1743280411Y.0000000014 ↗
8. 10.1016/j.msea.2005.02.01910.1016/j.msea.2005.02.019 ↗
9. 10.2351/1.52185910.2351/1.521859 ↗
10. 10.1179/sur.1996.12.3.25110.1179/sur.1996.12.3.251 ↗
11. 10.1016/j.jnucmat.2008.11.02310.1016/j.jnucmat.2008.11.023 ↗
12. 10.1016/j.optlastec.2006.01.00810.1016/j.optlastec.2006.01.008 ↗
13. 10.1016/j.surfcoat.2019.05.07910.1016/j.surfcoat.2019.05.079 ↗
14. 10.1016/j.jmst.2014.09.02010.1016/j.jmst.2014.09.020 ↗
15. 10.1016/j.matdes.2012.07.01310.1016/j.matdes.2012.07.013 ↗
16. 10.1016/j.matchar.2017.12.00210.1016/j.matchar.2017.12.002 ↗
17. Williams SW · Mater Sci Technol · 2015 · 32 · 1
18. Chen L · Int J Adv Manuf Technol · 2016 · 89 · 110.14257/ijast.2016.89.01 ↗
19. 10.1016/j.jmst.2013.02.01010.1016/j.jmst.2013.02.010 ↗
20. 10.2351/1.475771710.2351/1.4757717 ↗
21. 10.1016/j.msea.2017.03.10510.1016/j.msea.2017.03.105 ↗
22. Zhang HT · Mater Sci Technol · 2012 · 20 · 128
23. Technical Data Sheet: Inconel alloy 625. Special Metals Corporation; 2013.
24. 10.1016/j.jmst.2018.02.00210.1016/j.jmst.2018.02.002 ↗
25. 10.1016/j.msea.2015.06.02110.1016/j.msea.2015.06.021 ↗
26. 10.1016/S0022-3115(00)00723-610.1016/S0022-3115(00)00723-6 ↗