journal article·2012-01

Work hardening response of M50-NiL case hardened bearing steel during shakedown in rolling contact fatigue

N K Arakere, G Subhash

Materials Science and Technology· Volume 28· Issue 1
Publisher page

Abstract

The work hardening response during shakedown phase for case hardened M50-NiL bearing steel in rolling contact fatigue (RCF) is presented. Rolling contact fatigue testing is performed using a ball rod tester for varying cycles and Hertzian stress of 5·5 GPa on multiple test tracks of a case hardened rod. Longitudinal sectioning and polishing of the test rod reveal the RCF affected zones. Micro-Vickers indentation mapping of the subsurface zones is used to measure workhardening. A maximum increase in hardness from 7·4 to 8·3 GPa was observed at ∼13·5×106 cycles, after which hardness saturated. A finite element simulation of the RCF test was performed to predict the increase in hardness. It is hypothesised that plastic strain accumulation around the hard carbide inclusions results in increased hardness. Cyclic hardening likely saturates when the ratchet strain per cycle approaches zero. Plastic shakedown follows with no further accumulation of plastic strain and marks the beginning of steady state response.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Mechanical stress and fatigue analysis · Gear and Bearing Dynamics Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Aerospace Engineering, University of Florida Gainesville, FL, USA

References (13)

Show source-provided references
1. Vingsbo O · Metall. Trans. A · 1980 · 11 · 70110.1007/BF02661199 ↗
2. 10.1007/BF0259543710.1007/BF02595437 ↗
3. Voskamp AP · Z. MS&T · 1997 · 13 · 431
4. Sadeghi F · ASME J. Tribol. · 2009 · 131 · 1
5. 10.1080/1040200090322631710.1080/10402000903226317 ↗
6. ‘Rolling bearings – dynamic load ratings and rating life’, ISO/DIS 281, ISO, Geneva, Switzerland, 1989.
7. Lundberg G · Acta Polytech. · 1947 · 1 · 1
8. Hoo JJC · ASTM STP · 1981 · 771 · 108
9. 10.1016/j.ijsolstr.2010.10.02310.1016/j.ijsolstr.2010.10.023 ↗
10. 10.1007/BF0267193610.1007/BF02671936 ↗
11. 10.1007/BF0265732210.1007/BF02657322 ↗
12. Alley ES · ASTM STP · 2010 · 1524 · 111
13. Klecka M