journal article·2014-02

Constitutive model for AZ31 magnesium alloy based on isothermal compression test

J. Luan, C. Sun, X. Li, Q. Zhang

Materials Science and Technology· Volume 30· Issue 2
Publisher page

Abstract

Isothermal compression tests at temperatures ranging from 523 to 723 K and strain rates from 0·01 to 10 s−1 were performed on AZ31 magnesium alloy to reveal the deformation characteristics. The flow stress–strain curves show that the flow stress reaches a peak value and then decreases to steady values, which characterise a dynamic flow softening. The measured flow stress was modified by friction and temperature correction, which reflect the friction corrected flow stresses are lower than the measured ones and the effect of temperature rise on flow stress is obvious at high strain rate (≥1 s−1). The corrected flow curves were employed to develop the constitutive model. The influence of strain was also incorporated in the constitutive equation by considering the effects of strain on material constants, which were identified using sixth order polynomial. The flow stress predicted by the constitutive model shows good agreement with the corrected stress, which confirmed that the proposed model is effective and accurate for the flow stress of AZ31 magnesium alloy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Metallurgy and Material Forming · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering and Automation Beijing University of Aeronautics and Astronautics, Beijing 100191, China

School of Mechanical and Engineering University of Science and Technology Beijing, Beijing 100083, China

References (31)

Show source-provided references
1. 10.1179/mst.1994.10.1.110.1179/mst.1994.10.1.1 ↗
2. 10.1179/174328406X8403010.1179/174328406X84030 ↗
3. 10.1016/j.msea.2008.10.03310.1016/j.msea.2008.10.033 ↗
4. 10.1016/j.msea.2010.01.03510.1016/j.msea.2010.01.035 ↗
5. 10.1016/j.commatsci.2008.05.02110.1016/j.commatsci.2008.05.021 ↗
6. 10.1016/j.jmatprotec.2005.02.03410.1016/j.jmatprotec.2005.02.034 ↗
7. 10.1016/S1471-5317(01)00010-410.1016/S1471-5317(01)00010-4 ↗
8. 10.2320/matertrans.44.42610.2320/matertrans.44.426 ↗
9. 10.4028/www.scientific.net/MSF.488-489.21510.4028/www.scientific.net/MSF.488-489.215 ↗
10. 10.1016/j.jmatprotec.2005.09.02110.1016/j.jmatprotec.2005.09.021 ↗
11. Wang Z. T. · Chin. J. Nonferr. Met. · 2008 · 18 · 1977
12. 10.1016/j.commatsci.2010.08.00310.1016/j.commatsci.2010.08.003 ↗
13. 10.1016/j.matchar.2011.01.00410.1016/j.matchar.2011.01.004 ↗
14. 10.1016/S1359-6462(03)00046-010.1016/S1359-6462(03)00046-0 ↗
15. 10.1016/j.commatsci.2007.04.02410.1016/j.commatsci.2007.04.024 ↗
16. 10.1016/j.msea.2010.01.03510.1016/j.msea.2010.01.035 ↗
17. 10.1016/j.commatsci.2010.07.01610.1016/j.commatsci.2010.07.016 ↗
18. 10.1179/mht.2006.00510.1179/mht.2006.005 ↗
19. Wang D. N. ‘Principles of metal forming’; 1982, Beijing, China Machine Press.
20. 10.1016/j.jmatprotec.2004.03.02910.1016/j.jmatprotec.2004.03.029 ↗
21. 10.1361/10599490177034459310.1361/105994901770344593 ↗
22. 10.1016/S0261-3069(02)00025-010.1016/S0261-3069(02)00025-0 ↗
23. Luo Z. J. · Chin. J. Nonferrous Met. · 2000 · 10 · 804
24. 10.1063/1.170736310.1063/1.1707363 ↗
25. 10.1016/0001-6160(66)90207-010.1016/0001-6160(66)90207-0 ↗
26. 10.1179/1743284712Y.000000002110.1179/1743284712Y.0000000021 ↗
27. Sun C. Y. · Real Met. · 2011 · 30 · 81
28. 10.1179/1743284712Y.000000014010.1179/1743284712Y.0000000140 ↗
29. 10.1016/S0921-5093(01)01117-010.1016/S0921-5093(01)01117-0 ↗
30. 10.1016/0924-0136(95)01987-P10.1016/0924-0136(95)01987-P ↗
31. 10.1179/026708310X1268315844332310.1179/026708310X12683158443323 ↗