Metallurgical aspects of steels designed to resist abrasion, and impact-abrasion wear
Source abstract
Abstract
Many abrasion resistant steels rely on a martensitic microstructure to ensure hardness, which in general correlates with better wear performance. However, in practice the steel may be subjected to a complex combination of conditions where hardness alone may not be sufficient to ensure tribological performance. This review is a critical assessment of the mechanical and metallurgical parameters that control wear resistance of steel in impact-abrasion conditions, although relevant work dealing with abrasion has also been included. It is found, for example, that fracture toughness and work-hardening behaviour have a role in enhancing the wear resistance of hard steels.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
Funding
Tata Steel
References (100+)
Show source-provided references
1. Hatchett C. IV. experiments and observations on the various alloys, on the specific gravity, and on the comparative wear of gold. Being the substance of a report made to the right honourable the lords of the committee of privy council, appointed to take into consideration the state of the coins of this kingdom. Philos Trans R Soc London. 1803;93:43–194. Available from: http://rstl.royalsocietypublishing.org/content/93/43.full.pdf+html.10.1098/rstl.1803.0005 ↗
2. Rennie G. Experiments on the friction and abrasion of the surfaces of solids. Abstracts of the papers printed in the philosophical transactions of the royal society of london, vol. 2. The Royal Society; 1833. p. 364–365.10.1098/rspl.1815.0364 ↗
3. Bhansali K, Miller AE. Resistance of pure metals to low stress abrasive wear. Wear. 1981;71:375–379. Available from: http://www.sciencedirect.com/science/article/pii/0043164881902337.10.1016/0043-1648(81)90233-7 ↗
4. Gahr KHZ. Microstructure and wear of materials in tribology series. Vol. 10. Elsevier; 1987. p. 1–7. Available from: www.sciencedirect.com/science/article/pii/S0167892208707193.
5. Sarkar AD. · 2013 · 18
6. DavisJR. Surface engineering for corrosion and wear resistance. London: ASM International; 2001. Available from: https://books.google.co.uk/books?id=Lt7WBiILHpYC.
7. Neale MJ, Gee M. Industrial wear problems. 2001. Chapter 2, p. 3–III. Available from: http://www.sciencedirect.com/science/article/pii/B9780815514718500025.10.1016/B978-081551471-8.50002-5 ↗
8. Stachowiak GW, Batchelor AW. Abrasive, erosive and cavitation wear in Engineering tribology. 2014. Chapter 11, p. 525–576. Available from: http://www.sciencedirect.com/science/article/pii/B9780123970473000114.10.1016/B978-0-12-397047-3.00011-4 ↗
9. Stachowiak AWBGW, Grazyna B. Classification of wear processes. Vol. 10; 1987. Chapter 4, Microstructure and Wear of Materials, p. 80–131. Available from: http://www.sciencedirect.com/science/article/pii/S0167892208707223.10.1016/S0167-8922(08)70722-3 ↗
10. Rabinowicz E, Dunn L, Russell P. A study of abrasive wear under three-body conditions. Wear. 1961;4:345–355. Available from: http://www.sciencedirect.com/science/article/pii/0043164861900023.10.1016/0043-1648(61)90002-3 ↗
11. 10.1016/0043-1648(61)90002-310.1016/0043-1648(61)90002-3 ↗
12. 10.1016/S0043-1648(01)00712-810.1016/S0043-1648(01)00712-8 ↗
13. Chintha A, Valtonen K, Kuokkala V-T, Kundu S, Peet M, Bhadeshia H. Role of fracture toughness in impact-abrasion wear. Wear. 2019;430–431:430–437. Available from: http://www.sciencedirect.com/science/article/pii/S0043164819302285.10.1016/j.wear.2019.03.028 ↗
14. Xi JT, Zhou QD, Liu SH, Song GS. Influence of retained austenite on the wear resistance of high chromium cast iron under various impact loads. Wear. 1993;162:83–88. Wear of Materials: Proceedings of the 9th International Conference, Available from: http://www.sciencedirect.com/science/article/pii/0043164893904877.10.1016/0043-1648(93)90487-7 ↗
15. 10.1016/S0043-1648(03)00464-210.1016/S0043-1648(03)00464-2 ↗
16. Tylczak JH, Hawk JA, Wilson RD. A comparison of laboratory abrasion and field wear results. Wear. 1999;225-229(Part 2):1059–1069. Available from: http://www.sciencedirect.com/science/article/pii/S0043164899000435.10.1016/S0043-1648(99)00043-5 ↗
17. Hurricks P. Some metallurgical factors controlling the adhesive and abrasive wear resistance of steels. A review. Wear. 1973;26:285–304. Available from: http://www.sciencedirect.com/science/article/pii/0043164873901841.10.1016/0043-1648(73)90184-1 ↗
18. 10.1115/1.322505810.1115/1.3225058 ↗
19. 10.1016/0043-1648(74)90080-510.1016/0043-1648(74)90080-5 ↗
20. 10.1016/0301-679X(80)90092-410.1016/0301-679X(80)90092-4 ↗
21. 10.1016/S0043-1648(97)00188-910.1016/S0043-1648(97)00188-9 ↗
22. 10.1016/j.wear.2004.09.06510.1016/j.wear.2004.09.065 ↗
23. Pintaúde G, Albertin E, Sinatora A. A review on abrasive wear mechanisms of metallic materials. International Conference on Abrasion Wear Resistant Alloyed White Cast Iron for Rolling and Pulverizing Mills. IPT/EPUSP; 2005.
24. 10.1016/S0301-679X(96)00062-X10.1016/S0301-679X(96)00062-X ↗
25. 10.1063/1.172144810.1063/1.1721448 ↗
26. Gahr KHZ. Wear by hard particles. Tribol Int. 1998;31:587–596. Available from: http://www.sciencedirect.com/science/article/pii/S0301679X98000796.10.1016/S0301-679X(98)00079-6 ↗
27. 10.1016/0043-1648(65)90169-910.1016/0043-1648(65)90169-9 ↗
28. 10.2355/tetsutohagane1955.51.13_232210.2355/tetsutohagane1955.51.13_2322 ↗
29. 10.1016/0043-1648(67)90276-110.1016/0043-1648(67)90276-1 ↗
30. 10.1016/0043-1648(84)90214-X10.1016/0043-1648(84)90214-X ↗
31. 10.1016/0043-1648(81)90199-X10.1016/0043-1648(81)90199-X ↗
32. Ratia V, Miettunen I, Kuokkala VT. Surface deformation of steels in impact-abrasion: the effect of sample angle and test duration. Wear. 2013;301:94–101. Available from: http://www.sciencedirect.com/science/article/pii/S0043164813000161.10.1016/j.wear.2013.01.006 ↗
33. Wilson RD, Hawk JA. Impeller wear impact-abrasive wear test. Wear. 1999;225–229(Part 2):1248–1257. Available from: http://www.sciencedirect.com/science/article/pii/S0043164899000460.10.1016/S0043-1648(99)00046-0 ↗
34. 10.1016/j.wear.2017.12.01610.1016/j.wear.2017.12.016 ↗
35. 10.1080/0569819810898302010.1080/05698198108983020 ↗
36. 10.1016/0301-679X(79)90159-210.1016/0301-679X(79)90159-2 ↗
37. 10.1016/j.wear.2013.06.00610.1016/j.wear.2013.06.006 ↗
38. 10.1007/s11665-013-0842-210.1007/s11665-013-0842-2 ↗
39. Haiko O · Tribol-Finn J Tribol · 2017 · 35 · 5
40. 10.1007/s11249-014-0460-710.1007/s11249-014-0460-7 ↗
41. 10.1016/0301-679X(88)90128-410.1016/0301-679X(88)90128-4 ↗
42. Mulhearn TO, Samuels LE. The abrasion of metals: a model of the process. Wear. 1962;5:478–498. Available from: http://www.sciencedirect.com/science/article/pii/0043164862900649.10.1016/0043-1648(62)90064-9 ↗
43. 10.1115/1.325317110.1115/1.3253171 ↗
44. 10.1016/0043-1648(73)90125-710.1016/0043-1648(73)90125-7 ↗
45. 10.1016/j.wear.2009.08.00510.1016/j.wear.2009.08.005 ↗
46. Ratia V. Behavior of martensitic wear resistant steels in abrasion and impact wear testing conditions. Tribologia-Finnish J Tribol. 2016;34(1–2).
47. Gore GJ, Gates JD. Effect of hardness on three very different forms of wear. Wear. 1997;203:544–563. Available from: http://www.sciencedirect.com/science/article/pii/S0043164896074145.10.1016/S0043-1648(96)07414-5 ↗
48. Hawk JA, Wilson RD, Tylczak JH, Doğan ÖN. Laboratory abrasive wear tests: investigation of test methods and alloy correlation. Wear. 1999;225–229(Part 2):1031–1042. Available from: http://www.sciencedirect.com/science/article/pii/S0043164899000423.10.1016/S0043-1648(99)00042-3 ↗
49. Khruschov MM. Principles of abrasive wear. Wear. 1974;28:69–88. Available from: http://www.sciencedirect.com/science/article/pii/0043164874901021.10.1016/0043-1648(74)90102-1 ↗
50. 10.2474/trol.8.15210.2474/trol.8.152 ↗
51. 10.1007/BF0083829910.1007/BF00838299 ↗
52. 10.1111/j.1151-2916.1938.tb15747.x10.1111/j.1151-2916.1938.tb15747.x ↗
53. 10.2207/qjjws1943.24.12_48010.2207/qjjws1943.24.12_480 ↗
54. 10.2207/qjjws1943.27.8110.2207/qjjws1943.27.81 ↗
55. 10.1016/0043-1648(74)90101-X10.1016/0043-1648(74)90101-X ↗
56. Rosenberg SJ. · Trans Am Soc Steel Treating · 1930 · 18 · 1093
57. Gahr KHZ. · 1987
58. 10.1088/0370-1301/67/3/31010.1088/0370-1301/67/3/310 ↗
59. Bayer RG. Fundamentals of wear failures: ASM handbook international. 2002. p. 901–905. DOI:10.31399/asm.hb.v11.a0003558.10.31399/asm.hb.v11.a0003558 ↗
60. Lindroos M, Valtonen K, Kemppainen A, Laukkanen A, Holmberg K, Kuokkala V. Wear behavior and work hardening of high strength steels in high stress abrasion. Wear. 2015;322–323:32–40. Available from: http://www.sciencedirect.com/science/article/pii/S0043164814003238.10.1016/j.wear.2014.10.018 ↗
61. Hutchings IM, Shipway P. 6 – Wear by hard particles. In: Tribology. 2nd ed. Hutchings IM, Shipway P, editors. Butterworth-Heinemann; 2017. p. 165–236. Available from: http://www.sciencedirect.com/science/article/pii/B9780081009109000064.10.1016/B978-0-08-100910-9.00006-4 ↗
62. Rendón J, Olsson M. Abrasive wear resistance of some commercial abrasion resistant steels evaluated by laboratory test methods. Wear. 2009;267:2055–2061. Available from: http://www.sciencedirect.com/science/article/pii/S0043164809004827.10.1016/j.wear.2009.08.005 ↗
63. Mutton PJ, Watson JD. Some effects of microstructure on the abrasion resistance of metals. Wear. 1978;48:385–398. Available from: http://www.sciencedirect.com/science/article/pii/004316487890234X.10.1016/0043-1648(78)90234-X ↗
64. 10.1016/S0043-1648(00)00425-710.1016/S0043-1648(00)00425-7 ↗
65. 10.1016/0043-1648(79)90188-110.1016/0043-1648(79)90188-1 ↗
66. 10.1007/BF0267069810.1007/BF02670698 ↗
67. Moore MA. Abrasive wear. Int J Mater Eng Appl. 1978;1:97–111. Available from: http://www.sciencedirect.com/science/article/pii/S0141553078900547.10.1016/S0261-3069(78)80015-6 ↗
68. Xu L, Vose C, John DS. Abrasive wear study of selected white cast irons as liner materials for the mining industry. Wear. 1993;162:820–832. Available from: http://www.sciencedirect.com/science/article/pii/004316489390083X.10.1016/0043-1648(93)90083-X ↗
69. Sciezka SF, Filipowicz K. An integrated testing method for cermet abrasion resistance and fracture toughness evaluation. Wear. 1998;216:202–212. Available from: http://www.sciencedirect.com/science/article/pii/S0043164897001683.10.1016/S0043-1648(97)00168-3 ↗
70. 10.31399/asm.hb.v11.a000355810.31399/asm.hb.v11.a0003558 ↗
71. Torrance AA. Modelling abrasive wear. Wear. 2005;258:281–293. Available from: http://www.sciencedirect.com/science/article/pii/S0043164804002595.10.1016/j.wear.2004.09.065 ↗
72. 10.1016/0043-1648(78)90091-110.1016/0043-1648(78)90091-1 ↗
73. 10.1016/0043-1648(75)90280-X10.1016/0043-1648(75)90280-X ↗
74. 10.1007/BF0265981310.1007/BF02659813 ↗
75. 10.1007/BF0152753510.1007/BF01527535 ↗
76. 10.1016/0043-1648(80)90101-510.1016/0043-1648(80)90101-5 ↗
77. 10.1016/j.wear.2012.11.06410.1016/j.wear.2012.11.064 ↗
78. 10.1016/0043-1648(83)90229-610.1016/0043-1648(83)90229-6 ↗
79. Ojala N, Valtonen K, Heino V, Kallio M, Aaltonen J, Siitonen P, Kuokkala VT. Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels. wear. 2014;317:225–232. Available from: http://linkinghub.elsevier.com/retrieve/pii/S0043164814001859.10.1016/j.wear.2014.06.003 ↗
80. Nakayo H · Casting · 1964 · 36 · 102
81. 10.1016/j.wear.2012.03.00510.1016/j.wear.2012.03.005 ↗
82. 10.1016/0043-1648(79)90121-210.1016/0043-1648(79)90121-2 ↗
83. 10.1016/0043-1648(83)90338-110.1016/0043-1648(83)90338-1 ↗
84. 10.1179/1743284715Y.000000006110.1179/1743284715Y.0000000061 ↗
85. 10.1016/0043-1648(89)90282-210.1016/0043-1648(89)90282-2 ↗
86. 10.1016/0043-1648(90)90026-710.1016/0043-1648(90)90026-7 ↗
87. 10.1007/BF0111569910.1007/BF01115699 ↗
88. 10.1016/0043-1648(82)90258-710.1016/0043-1648(82)90258-7 ↗
89. 10.1016/0043-1648(93)90487-710.1016/0043-1648(93)90487-7 ↗
90. 10.1007/s11665-999-0007-510.1007/s11665-999-0007-5 ↗
91. 10.1016/j.wear.2004.09.06410.1016/j.wear.2004.09.064 ↗
92. 10.1016/0043-1648(95)06634-910.1016/0043-1648(95)06634-9 ↗
93. 10.1016/j.wear.2013.01.00610.1016/j.wear.2013.01.006 ↗
94. 10.1016/j.matdes.2016.05.05610.1016/j.matdes.2016.05.056 ↗
95. 10.1016/j.msea.2007.02.09410.1016/j.msea.2007.02.094 ↗
96. 10.1007/s40544-017-0158-610.1007/s40544-017-0158-6 ↗
97. 10.1016/j.msea.2009.08.02810.1016/j.msea.2009.08.028 ↗
98. Hernandez S, Leiro A, Ripoll MR, Vuorinen E, Sundin KG, Prakash B. High temperature three-body abrasive wear of 0.25c 1.42si steel with carbide free bainitic (cfb) and martensitic microstructures. Wear. 2016;360:21–28. Available from: http://www.sciencedirect.com/science/article/pii/S0043164816300503.10.1016/j.wear.2016.04.012 ↗
99. Bhadeshia HKDH. · 2015
100. 10.1016/j.wear.2014.04.02010.1016/j.wear.2014.04.020 ↗