journal article·2020-09

Microstructural investigations on simulated intercritical heat-affected zone of boron modified P91-steel

Akhil Khajuria, Modassir Akhtar, Raman Bedi, Rajneesh Kumar, Mainak Ghosh, C. R. Das, Shaju K. Albert

Materials Science and Technology· Volume 36· Issue 13
Publisher page

Abstract

Conventional P91 and boron modified P91-steels were considered in the present investigation. Using Gleeble, weld intercritical heat-affected zone (ICHAZ) was processed. Conventional microscopy was done along with electron back-scattered diffraction for both specimens. Lath boundary of martensite was more, and preferably oriented for P91B-ICHAZ than P91-ICHAZ. Lattice strain was high and lath mobility was low for P91B-ICHAZ in comparison to P91-ICHAZ. Large fraction of ferritic grain structure (39.1%) and small fraction of fresh martensitic grain structure (9.5%) in P91-ICHAZ, whereas small fraction of ferritic grain structure (10.7%) and large fraction of fresh martensitic grain structure (32.7%) in P91B-ICHAZ was observed. However, tempered martensite exhibited meager variation. These differences between ICHAZ simulations were attributed to the presence of 100ppm-boron in P91B-steel.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Dr B R Ambedkar National Institute of Technology, Jalandhar, India

Materials Engineering Division, CSIR-National Metallurgical Laboratory, Jamshedpur, India

Department of Metallurgical and Materials Engineering, National Institute of Technology Warangal, Hanamkonda, India

Metallurgy & Materials Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamil Nadu, India

Funding

Board of Research in Nuclear Sciences

References (37)

Show source-provided references
1. 10.1179/1362171813Y.000000015210.1179/1362171813Y.0000000152 ↗
2. 10.1080/10426914.2015.102596410.1080/10426914.2015.1025964 ↗
3. Khajuria A, Kumar R, Bedi R Impression creep studies on simulated reheated HAZ of P91 and P91B steels. Int. J. Mod. Manuf. Technol. 2018; 10:50–56. https://www.ijmmt.ro/vol10no12018/07_Khajuria_Akhil.pdf.
4. 10.1007/s12666-009-0011-310.1007/s12666-009-0011-3 ↗
5. Khajuria A, Kumar R, Bedi R. Characterizing creep behaviour of modified 9Cr1Mo steel by using small punch impression technique for thermal powerplants. J. Mech. Mechanics Eng. 2018; 4:47–61. doi:10.5281/zenodo.1453768.
6. 10.1179/174328406X14877810.1179/174328406X148778 ↗
7. 10.1016/j.jmapro.2019.08.02910.1016/j.jmapro.2019.08.029 ↗
8. 10.1088/2053-1591/ab6db710.1088/2053-1591/ab6db7 ↗
9. 10.1007/s11661-018-4490-x10.1007/s11661-018-4490-x ↗
10. 10.1007/s11661-016-3387-910.1007/s11661-016-3387-9 ↗
11. 10.1007/s11661-012-1179-410.1007/s11661-012-1179-4 ↗
12. 10.1007/s13204-018-0854-110.1007/s13204-018-0854-1 ↗
13. 10.1179/174329306X8926010.1179/174329306X89260 ↗
14. 10.1007/978-3-319-48765-6_1310.1007/978-3-319-48765-6_13 ↗
15. 10.1088/2053-1591/ab71cd10.1088/2053-1591/ab71cd ↗
16. 10.1007/s13632-019-00573-w10.1007/s13632-019-00573-w ↗
17. 10.1007/978-981-13-6287-3_1010.1007/978-981-13-6287-3_10 ↗
18. 10.1007/s11665-019-04167-z10.1007/s11665-019-04167-z ↗
19. 10.1134/S0031918X1907005610.1134/S0031918X19070056 ↗
20. 10.1179/174328406X13094810.1179/174328406X130948 ↗
21. Wang Y · Weld J · 2016 · 95 · 27
22. Wang Y · Weld J · 2017 · 96 · 203
23. 10.1007/978-981-15-4619-8_2010.1007/978-981-15-4619-8_20 ↗
24. 10.1080/1042691090314341510.1080/10426910903143415 ↗
25. 10.1179/02670830077300263610.1179/026708300773002636 ↗
26. 10.1080/1042691060113417910.1080/10426910601134179 ↗
27. 10.1016/j.actamat.2005.11.00110.1016/j.actamat.2005.11.001 ↗
28. 10.1016/j.matchar.2006.08.01410.1016/j.matchar.2006.08.014 ↗
29. 10.1016/j.msea.2006.12.22010.1016/j.msea.2006.12.220 ↗
30. 10.1179/174892406X17361110.1179/174892406X173611 ↗
31. 10.1016/j.ijpvp.2010.08.00510.1016/j.ijpvp.2010.08.005 ↗
32. 10.1007/s11661-011-0941-310.1007/s11661-011-0941-3 ↗
33. 10.1016/j.matchar.2016.05.02410.1016/j.matchar.2016.05.024 ↗
34. Lege FH. ASM Hand Book, Metallography and microstructures. Cleveland: American Society for Metals; 1984. 9, 605. Available from: www.asminternational.org/bestsellers/-/journal_content/56/10192/06044G/PUBLICATION
35. 10.1179/136217109X1250593258485310.1179/136217109X12505932584853 ↗
36. 10.1016/S1359-6454(02)00005-810.1016/S1359-6454(02)00005-8 ↗
37. 10.1016/j.matchemphys.2020.12284710.1016/j.matchemphys.2020.122847 ↗