journal article·2010-04

Orientation relationship transition of nanometre sized interphase precipitated TiC carbides in Ti bearing steel

H. W. Yen, C. Y. Chen, T. Y. Wang, C. Y. Huang, J. R. Yang

Materials Science and Technology· Volume 26· Issue 4
Publisher page

Abstract

The objective of the present study was to investigate the crystallography and morphology of TiC particles in a titanium containing high strength low alloy (HSLA) steel that form during isothermal transformation at a temperature in the ( α + γ) phase field. The orientation relationships (ORs) were identified from selected area diffraction patterns (SADPs) and from moire fringes in high resolution transmission electron microscopy (HRTEM) lattice images. It was found that in the initial stages of the isothermal transformation, fine plate-like TiC particles develop and that these exhibit the Baker–Nutting (BN) OR with respect to the ferrite matrix. In the later stages of the transformation, however, coarser plate-like carbides are observed, and these adopt approximately the Nishiyama–Wassermann (NW) OR with respect to the ferrite matrix. The evidence indicates that OR transition is brought about simply by aging for a longer time at the transformation temperature, and also manifests a rotation of the precipitate during coarsening.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and EngineeringNational Taiwan University, Taipei, Taiwan

China Steel Corporation, Kaohsiung, Taiwan

References (22)

Show source-provided references
1. Pickering F. B. ‘Physical metallurgy and the design of steels’, 66; 1978, London, Applied Science Publishers.
2. Yoshimasa F., Tetsuo S., and Shinjiro K.: ISIJ Int. 2004, 44, 25.
3. Yoshimasa F., Tsuyoshi S., Kunikazu T., Tetsuo Y., and Eiji M.: ISIJ Int. 2003, 44, 1945.
4. Kashima T. · R&D Kobe Steel Eng. Rep · 2002 · 52 · 19
5. 10.1007/s11661-003-0231-910.1007/s11661-003-0231-9 ↗
6. Edmonds D. V., and Honeycombe R. W. K.: in ‘Precipitation process in solids’, (ed.Russell K. C. et al), 121; 1976, Warrendale, PA, TMS-AIME.
7. 10.1007/BF0264405710.1007/BF02644057 ↗
8. 10.1016/0001-6160(83)90113-X10.1016/0001-6160(83)90113-X ↗
9. Davenport A. T. · Proc. R. Soc. Lond. A · 1971 · 322 · 19110.1098/rspa.1971.0063 ↗
10. 10.1007/BF0281197510.1007/BF02811975 ↗
11. Honeycombe R. W. K.: Proc. Int. Conf. on HSLA Steel ‘85, Beijing, China, November 1985, ASM International, 243.
12. Smith S. M. · Mater. ScL Forum · 1988 · 11 · 166
13. 10.1179/03063458279042738910.1179/030634582790427389 ↗
14. Baker B. G., and Nutting J. ‘Precipitation processes in steels’, Special report 64, Iron and Steel Institute, London, UK, 1959.
15. 10.1080/1478643031000163876210.1080/14786430310001638762 ↗
16. 10.1002/(SICI)1521-396X(200001)177:1<117::AID-PSSA117>3.0.CO;2-410.1002/(SICI)1521-396X(200001)177:1<117::AID-PSSA117>3.0.CO;2-4 ↗
17. Nishiyama Z. · Tohoku Univ · 1934 · 23 · 637
18. Wasserman G. · Arch. Eisenhuttenwes · 1933 · 16 · 627
19. Guo Z., Lee C. S., and Morris J. W.Jr: Acta Mater. 2004, 52, 5511.10.1016/j.actamat.2004.08.011 ↗
20. 10.1007/BF0139734610.1007/BF01397346 ↗
21. 10.1007/BF0267231510.1007/BF02672315 ↗
22. Fujii T., Nakazawa H., Kato M., and Dahmen U.: Acta Mater. 2000, 48, 1033.10.1016/S1359-6454(99)00411-5 ↗