Interphase precipitation in Ti–Nb and Ti–Nb–Mo bearing steel
Source abstract
Abstract
The interphase precipitation of carbides has been studied in two microalloyed steels containing Ti and Nb, but only one of which contains molybdenum. The precipitates obtained are, therefore, (Ti,Nb)C and (Ti,Nb,Mo)C respectively. It is found that molybdenum significantly reduces the size of the carbide precipitates and also strongly retards their coarsening behaviour during subsequent heat treatment. This is because it enhances the nucleation rate by reducing the interfacial energy, but it is not thermodynamically favoured within the (Ti,Nb,Mo)C, so the later stages of growth involve its partitioning into the matrix, thus explaining the reduction in coarsening rate relative to the molybdenum free steel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate Institute of Ferrous Technology, Pohang University of Science and Technology, Pohang 790-784, Korea
Technical Research Laboratories, POSCO, Pohang 790-785, Korea
Materials Science and Metallurgy, University of Cambridge, UK
References (23)
Show source-provided references
1. Gray JM · Trans. ASM · 1968 · 61 · 255
2. 10.1179/03063456879044334110.1179/030634568790443341 ↗
3. 10.1179/03063458079042648110.1179/030634580790426481 ↗
4. Gladman T: ‘The physical metallurgy of microalloyed steels’; 1996, London, IOM Communications.
5. 10.1179/03063457379044537010.1179/030634573790445370 ↗
6. 10.1179/03063457679043197610.1179/030634576790431976 ↗
7. 10.1179/msc.1983.17.1.1910.1179/msc.1983.17.1.19 ↗
8. 10.1080/03063453.1974.1191076610.1080/03063453.1974.11910766 ↗
9. 10.1179/msc.1977.11.2.5910.1179/msc.1977.11.2.59 ↗
10. 10.1007/BF0264405710.1007/BF02644057 ↗
11. 10.1007/BF0264638610.1007/BF02646386 ↗
12. 10.2355/isijinternational.44.194510.2355/isijinternational.44.1945 ↗
13. Seto K · JFE GIHO · 2007 · 28
14. 10.1016/j.msea.2007.11.11010.1016/j.msea.2007.11.110 ↗
15. 10.1179/026708309X1251274415420710.1179/026708309X12512744154207 ↗
16. 10.1179/026708309X1252655549335010.1179/026708309X12526555493350 ↗
17. 10.1016/j.msea.2004.11.04110.1016/j.msea.2004.11.041 ↗
18. 10.1016/S1359-6454(00)00389-X10.1016/S1359-6454(00)00389-X ↗
19. 10.1016/j.actamat.2011.09.05110.1016/j.actamat.2011.09.051 ↗
20. Davenport AT · Proc. R. Soc. Lond. A · 1971 · 322 · 19110.1098/rspa.1971.0063 ↗
21. 10.1002/pssa.221069023810.1002/pssa.2210690238 ↗
22. 10.1007/BF0264503810.1007/BF02645038 ↗
23. Lagneborg R · Metall. Mater. Trans. A · 2000 · 31 · 1