journal article·2003-10

Influence of grain size on tensile properties of Al-Mg alloys

D. J. Lloyd, S. A. Court

Materials Science and Technology· Volume 19· Issue 10
Publisher page

Abstract

Grain size refinement is an important strengthening mechanism in Al-Mg 5000 series alloys, which have a relatively large Hall-Petch slope compared with other Al alloys. In addition, the high work hardening rate exhibited by Al-Mg alloys provides excellent formability. This paper investigates the influence of grain size on the flow stress over a range of strains, and in several different Al-Mg alloys. It is found that the Hall-Petch slope decreases after yield, indicating that the large grain size effect is primarily associated with initiating plasticity in these alloys. Beyond yield the slope decreases to a value equivalent to other, non-Mg containing alloys, and shows no clear dependence on strain. The intercept stress from the Hall-Petch plots at different strains is non-linear with ϵ 1/2 for alloys containing up to 3 wt-%Mg, which indicates that the free slip distance is strain dependent in these alloys. In an Al-5 wt-%Mg alloy the intercept stress is linear with ϵ 1/2, indicating that solute atoms are controlling the free slip distance. If Mn is added to the Al-5 wt-%Mg alloy, as it is in commercial alloys, it has little influence on the grain size dependence, but it does increase the frictional stress at the highest Mn level of 0.7 wt-%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (6)

Show source-provided references
1. RETCH N. J. · J. Iron Steel Inst · 1953 · 174 · 25
2. 10.1080/1478643730821745410.1080/14786437308217454 ↗
3. 10.1179/msc.1980.14.5.19310.1179/msc.1980.14.5.193 ↗
4. 10.1080/1478643700823842610.1080/14786437008238426 ↗
5. 10.1016/0956-7151(91)90173-X10.1016/0956-7151(91)90173-X ↗
6. 10.1179/mst.1997.13.8.66010.1179/mst.1997.13.8.660 ↗