Effect of hardness of martensite and ferrite on void formation in dual phase steel
Source abstract
Abstract
The influence of the hardness of martensite and ferrite phases in dual phase steel on void formation has been investigated by in situ tensile loading in a scanning electron microscope. Microstructural observations have shown that most voids form in martensite by evolving four steps: plastic deformation of martensite, crack initiation at the martensite/ferrite interface, crack propagation leading to fracture of martensite particles and void formation by separation of particle fragments. It has been identified that the hardness effect is associated with the following aspects: strain partitioning between martensite and ferrite, strain localisation and critical strain required for void formation. Reducing the hardness difference between martensite and ferrite phases by tempering has been shown to be an effective approach to retard the void formation in martensite and thereby is expected to improve the formability.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Nippon Steel Corporation, 6-1, Marunouchi 2-Chome, Chiyoda-Ku, Tokyo 100-8071, Japan
Materials Research Division, Risø National Laboratory for Sustainable Energy, Technical University of Denmark, Roskilde DK-4000, Denmark
Danish–Chinese Center for Nanometals, Materials Research Division, Risø National Laboratory for Sustainable Energy, Technical University of Denmark, Roskilde DK-4000, Denmark
References (46)
Show source-provided references
1. Davies R. G.: in ‘Formable HSLA and dual phase steels’, (ed. Davenport A. T.), 25–39; 1977, Warrendale, PA, TMS-AIME.
2. Marder A. R., and Bramfitt B. L.: in ‘Structure and properties of dual-phase steels’, (ed. Kot R. A., and Morris J. W.), 145–82; 1979, Warrendale, PA, TMS-AIME.
3. 10.1007/s11661-006-9023-310.1007/s11661-006-9023-3 ↗
4. Akisue O., and Usuda M.: Nippon Steel Technical Report no. 57, 11–15, Nippon Steel Corporation, Tokyo, Japan, 1993.
5. Matsuoka S., Hasegawa K., and Tanaka K.: JFE Technical Report no. 10, 13–18, JFE Steel Corporation, Tokyo, Japan, 2007.
6. Kishida K.: Nippon Steel Technical Report no. 81, 12–16, Nippon Steel Corporation, Tokyo, Japan, 2000.
7. Delincé M. · Acta Metall. · 2007 · 55 · 2337
8. 10.1016/j.commatsci.2007.07.03610.1016/j.commatsci.2007.07.036 ↗
9. 10.1016/0921-5093(89)90352-310.1016/0921-5093(89)90352-3 ↗
10. He X. J. · J. Mater. Sci. · 1984 · 18 · 367
11. Avramovic-Cingara G. · Metall. Mater. Trans. A: Phys. Metall. Mater. Sci. · 2010 · 40 · 311710.1007/s11661-009-0030-z ↗
12. 10.1016/j.msea.2009.03.05510.1016/j.msea.2009.03.055 ↗
13. 10.2355/tetsutohagane.95.88710.2355/tetsutohagane.95.887 ↗
14. 10.1007/BF0264783810.1007/BF02647838 ↗
15. 10.1016/j.scriptamat.2010.07.02110.1016/j.scriptamat.2010.07.021 ↗
16. Maire E. · Acta Metall. · 2008 · 56 · 4954
17. 10.1016/0036-9748(84)90106-610.1016/0036-9748(84)90106-6 ↗
18. 10.1007/BF0035663110.1007/BF00356631 ↗
19. 10.1016/j.msea.2009.01.05610.1016/j.msea.2009.01.056 ↗
20. 10.1007/BF0264927210.1007/BF02649272 ↗
21. 10.1023/A:101654892255510.1023/A:1016548922555 ↗
22. Calcagnotto M. · Acta Metall. · 2011 · 59 · 658
23. Kadkhodapour J. · Int. J. Plast. · 2011 · 59 · 2575
24. 10.1016/S0924-0136(02)00923-810.1016/S0924-0136(02)00923-8 ↗
25. Samuel F. H. · Metall. Trans. · 1985 · 75 · 51
26. 10.1016/1044-5803(90)90010-H10.1016/1044-5803(90)90010-H ↗
27. 10.2355/isijinternational.44.60310.2355/isijinternational.44.603 ↗
28. 10.1016/0036-9748(77)90336-210.1016/0036-9748(77)90336-2 ↗
29. 10.1016/0026-0800(84)90016-810.1016/0026-0800(84)90016-8 ↗
30. 10.1007/s11661-007-9122-910.1007/s11661-007-9122-9 ↗
31. 10.1016/0001-6160(76)90109-710.1016/0001-6160(76)90109-7 ↗
32. 10.1016/0001-6160(72)90102-210.1016/0001-6160(72)90102-2 ↗
33. Azuma M., Goutianos S., Hansen N., Winther G., and Huang X.: Proc. 31th Risø Int. Symp. on ‘Material science’, Roskilde, Denmark, September 2010, Risø National Laboratory, 243–250.
34. 10.1016/0025-5416(87)90507-610.1016/0025-5416(87)90507-6 ↗
35. 10.1179/mst.1986.2.1.2810.1179/mst.1986.2.1.28 ↗
36. Pickering F. B.: in ‘Hardenability concepts with applications to steel’, (ed. Daone D. V., and Kirkaldy J. S.), 229; 1978, Warrendale, PA, AIME.
37. Nishijima S., Ishii A., Kanazawa K., Matsuoka S., and Masuda C. ‘Fundamental fatigue properties of JIS steels for machine structural use’, 77; 1989, Ibaraki, National Research Institute for Metals.
38. 10.1016/0921-5093(91)90804-V10.1016/0921-5093(91)90804-V ↗
39. 10.1016/0921-5093(94)09594-M10.1016/0921-5093(94)09594-M ↗
40. 10.1016/0956-7151(93)90100-710.1016/0956-7151(93)90100-7 ↗
41. 10.1080/1478643700823842610.1080/14786437008238426 ↗
42. 10.1016/0956-7151(91)90166-X10.1016/0956-7151(91)90166-X ↗
43. 10.1016/j.scriptamat.2010.02.01410.1016/j.scriptamat.2010.02.014 ↗
44. 10.1016/j.msea.2010.04.05210.1016/j.msea.2010.04.052 ↗
45. 10.1016/0025-5416(82)90151-310.1016/0025-5416(82)90151-3 ↗
46. Gladman T., Holmes B., and Mclvor I. D. ‘Effect of second-phase particles on the mechanical properties of steel’; 1971, London, ISI Publication.