Gas tungsten arc welding of α + β titanium alloys: A review
Source abstract
Abstract
Titanium alloys used in aerospace structures require joints of high integrity to meet the design requirements. Gas tungsten arc welding (GTAW), laser beam welding (LBW) and electron beam welding (EBW) are all processes capable of creating fusion welded joints. Gas tungsten arc welding offers the potential to achieve welds of equal quality to EBW or LBW at much lower capital costs; however, the application of GTAW involves gaining an understanding of the complex process characteristics. This paper reviews the process characteristics for GTAW titanium alloys and compares these characteristics with EBW and LBW titanium alloys. The characteristics of active flux tungsten inert gas welding and keyhole mode GTAW, two recent developments to GTAW, are considered, as is keyhole mode plasma arc welding. These variants are capable of greater penetration and, in some cases, faster processing speeds than conventional GTAW. Finally, the current knowledge of weld microstructural development in cast and wrought α + β titanium alloys and the mechanical performance of such welded joints are examined. Notably, conduction mode GTAWs are shown to have comparable mechanical properties with EBWs in relation to both cast and wrought base metals.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Baeslack W. A. · J. Met · 1984 · 36 · 46
2. Becker D. W. · III: Proc. 4th Int. Conf. on ‘Titanium’, Kyoto, Japan, 19-22 May 1980, Metallurgical Society of AIME · 255
3. Jarvis B. L., and Tanaka M.: in ‘New developments in advanced welding’, (ed.Ahmed N. U.), 40-80; 2005, Cambridge, UK, Woodhead Publishing Ltd.10.1533/9781845690892.40 ↗
4. Baeslack W. A., Davis J. R., and Cross C. E.: in ‘ASM handbook.Vol. 6: welding, brazing and soldering’, (eds. Olson D. L. et al), 10th edn, 507-523; 1993, Materials Park, OH, USA, ASM International.10.31399/asm.hb.v06.a0001415 ↗
5. Blashchuk V. E. · Paton Weld 1 · 2004 · 30
6. Blashchuk V. E. · Paton Weld 1 · 2005 · 35
7. Hartman J. R. · Proc. of the Materials Weldability Symposium held in conjunction with Materials Week, Detroit, MI, USA, 8-12 October 1990, ASM International, · 319
8. Witt R., Flescher A., and Paul O.: in ‘Titanium and titanium alloys’, (ed.Donarchie M. J.), 301-314; 1982, Materials Park, OH, USA, ASM International.
9. Zamkov V. N. · J. Adv. Mater · 2000 · 32 · 57
10. Margolin H., Williams J. C., Chesnutt J. C., and Luetjering G.: Proc. 4th Int. Conf. on ‘Titanium’, Kyoto, Japan, 19-22 May 1980, Metallurgical Society of AIME,169–216.
11. Vishnu R.: in ‘ASM handbook.Vol. 6: Welding, brazing and soldering’, (ed. Olson D. L. et al), 10th edn, 71-86; 1993, Materials Park, OH, USA, ASM International.
12. Marya S. · Rare Met. Mater. Eng · 2006 · 35 · 15
13. Mendez P. F. · Adv. Mater. Processes · 2001 · 159 · 39
14. Hilton P., Blackburn J., and Chong P.: ICALEO 2007, Orlando, FL, USA, 29 October-1 November 2007, Laser Institute of America,887–895.
15. Tanaka M. · J. Phys. D: AppL Phys · 2007 · 4010.1088/0022-3727/40/5/027 ↗
16. 10.1179/174329305X5750910.1179/174329305X57509 ↗
17. 10.1179/13621710010153819110.1179/136217100101538191 ↗
18. Lucas W. ‘TIG and plasma welding: process techniques, recommended practices and applications': 1990, Abington, Cambridge, UK, Woodhead Publishing.
19. 10.1179/13621710032291062410.1179/136217100322910624 ↗
20. Marya S.: IIW Doc. XII-1804-04,2004406–414.
21. 10.1179/13621710422502157110.1179/136217104225021571 ↗
22. Richardson I. M. · 1991
23. Lathabai S., Barton K. J., Green L. K., and Tyagi V. K.: Proc. 7th Int. Conf. on ‘Trends in welding research’, (ed.David S. A.) Callaway Gardens Resort, Pine Mountain, GA, USA, 16-20 May 2005, ASM International, 711–716.
24. Bardin F., Morgan S., Williams S., McBride R., Moore A. J., Jones J. D. C., and Hand D. P.: AppL Opt. 2005, 44, 6841–6848.10.1364/AO.44.006841 ↗
25. 10.1088/0022-3727/38/18/01810.1088/0022-3727/38/18/018 ↗
26. Quigley M. B. C.: in ‘The physics of welding’, (ed.Lancaster J. F.), 268-290; 1984, Oxford, UK, Pergamon Press.
27. Fujii H., Masaki M., Sakuno F., and Takeda Y.: 10th World Conf. on ‘Titanium’, (ed.Lutjering G., and Albrecht J.), Hamburg, Germany, 13-18 July 2003, 699-705, Wiley-VCH.
28. Short A., McCartney D. G., Webb P., and Preston E.: 8th Int. Conf. on ‘Trends in welding research’, Callaway Gardens Resort, Pine Mountain, GA, USA, 1-6 June 2008, ASM International.
29. 10.1080/1042691070144667110.1080/10426910701446671 ↗
30. Jarvis B. L. · 2001
31. Wu K.: Weld 1, 1981, 60, 219s-226s.
32. Kumar A., and DebRoy T.: Weld J, 2006, 85, 292s-304s.
33. Mendez P. F. · Weld. J · 2001 · 82 · 296s
34. 10.1179/174329306X12846410.1179/174329306X128464 ↗
35. Savage W. F., Nippes E. F., and Agusa K.: Weld J. 1979, 58, s212—s224.
36. McLean W., and Pinfold B. E.: Proc. 3rd Int. Conf. of ‘Advances In welding processes’, 7-9 May 1974, TWI,93–104.
37. Bashenko V. V. · Weld J · 1988 · 67 · 233
38. 10.21236/ADA06872210.21236/ADA068722 ↗
39. 10.1179/174329305X2946510.1179/174329305X29465 ↗
40. 10.1179/02670830110151008710.1179/026708301101510087 ↗
41. 10.1179/174329305X4837410.1179/174329305X48374 ↗
42. McGillicuddy K. · 2002
43. Ericsson M., Berglund D., and Nylén P.: Proc. 6th Int. Conf. on ‘Trends in welding research’, Pine Mountain, GA, USA, 15-19 April 2002, ASM International,973–979.
44. van der Aa E. M. · Proc. 7th Int. Conf. on ‘Trends in welding research’, Callaway Gardens Resort, Pine Mountain, GA, USA, 16-20 May 2005, ASM International · 577
45. Smith L., Gittos M., and Threadgill P. ‘High quality and productivity joining processes and procedures for titanium risers and flowlines’, Trondheim, Norway, 1999, SINTEF.
46. Grong O. ‘Metallurgical modelling of welding’: 1994, London, The Institute of Materials.
47. Easterling K. E. ‘Introduction to the physical metallurgy of welding’: 1992, Oxford, UK, Butterworth-Heinemann Ltd.
48. L&üfiering G., and Williams J. C. ‘Titanium’, 379; 2003, Berlin, Springer.
49. Peters J. O. · MetalL Mater. Trans. A, 2001, 32A · 2805
50. Harwig D. D., Fountain C., Ittiwattana W., and Castner H.: Weld 1, 2000, 79, 305s-316s.
51. Mishra S., and DebRoy T.: Acta Mater. 2004, 52, 1183–1192.10.1016/j.actamat.2003.11.003 ↗
52. 10.1179/imr.1975.20.1.8310.1179/imr.1975.20.1.83 ↗
53. 10.1007/s11661-999-1011-y10.1007/s11661-999-1011-y ↗
54. 10.1081/AMP-20004185710.1081/AMP-200041857 ↗
55. Jones S. A. · 2003
56. 10.1179/174328006X10249310.1179/174328006X102493 ↗
57. 10.1557/JMR.2008.000210.1557/JMR.2008.0002 ↗
58. 10.1016/j.scriptamat.2005.08.02010.1016/j.scriptamat.2005.08.020 ↗
59. Neuberger B. W. · 2004
60. 10.1179/174329306X12075010.1179/174329306X120750 ↗
61. 10.1007/BF0057927110.1007/BF00579271 ↗
62. 10.1016/S0921-5093(98)01010-710.1016/S0921-5093(98)01010-7 ↗
63. 10.1179/13621719910153769910.1179/136217199101537699 ↗
64. 10.1179/174329306X7708310.1179/174329306X77083 ↗
65. Yang Z., Sista S., Elmer J. W., and Debroy T.: Acta Mater. 2000, 48, 4813–4825.10.1016/S1359-6454(00)00279-2 ↗
66. 10.1016/S0921-5093(97)00802-210.1016/S0921-5093(97)00802-2 ↗
67. Gould J. E. · Proc. TMS-AIME Fall meeting: ‘Physical metallurgy of metal joining’, St. Louis, MO, USA, 16-17 October 1980, ASM International, · 199
68. 10.1023/A:100437470363010.1023/A:1004374703630 ↗
69. Murthy K. K. · Weld 1 · 1997
70. 10.1007/BF0266490910.1007/BF02664909 ↗
71. 10.1007/s11661-998-0317-510.1007/s11661-998-0317-5 ↗
72. 10.1063/1.173747610.1063/1.1737476 ↗
73. 10.1007/s11661-002-0204-410.1007/s11661-002-0204-4 ↗
74. 10.1007/s11837-005-0114-110.1007/s11837-005-0114-1 ↗
75. 10.1007/s11837-005-0028-y10.1007/s11837-005-0028-y ↗
76. 10.1007/s11837-005-0112-310.1007/s11837-005-0112-3 ↗
77. 10.1515/pm-1997-34040610.1515/pm-1997-340406 ↗
78. 10.1361/105994905X7564610.1361/105994905X75646 ↗
79. 10.1007/s11837-005-0030-410.1007/s11837-005-0030-4 ↗
80. Smith L., Threadgill P., and Gittos M. ‘Welding titanium: A designers and users handbook’; 1999, Cambridge, Titanium Information Group.
81. 10.1016/S0042-207X(00)00454-110.1016/S0042-207X(00)00454-1 ↗
82. Kotecki D.: Weld 1, 1999, 78, 180s-192s.
83. Borradaile J. B., and Jeal R. H. ‘Mechanical properties of titanium alloys’, 141-152; 1980, Kyoto, Japan, Titanium Science and Technology.
84. 10.1016/S0924-0136(02)00248-010.1016/S0924-0136(02)00248-0 ↗
85. Lutjering G.: Mater. Sci. Eng. A, 1999, A263,117–126.
86. 10.1016/j.jmatprotec.2007.08.00110.1016/j.jmatprotec.2007.08.001 ↗
87. Lutjering G.: Mater. Sci. Eng. A, 1998, A243,32–45.
88. 10.1007/s11661-006-0028-810.1007/s11661-006-0028-8 ↗
89. 10.1088/0957-0233/15/1/00110.1088/0957-0233/15/1/001 ↗
90. Tiley J. · 2002
91. 10.1016/j.msea.2003.12.00810.1016/j.msea.2003.12.008 ↗
92. 10.1361/1059949041842410.1361/10599490418424 ↗
93. Wei Y. H. · J. Mater. Sci. Technot · 2005 · 21 · 403
94. 10.1016/S0921-5093(97)00784-310.1016/S0921-5093(97)00784-3 ↗
95. 10.1243/03093247JSA27310.1243/03093247JSA273 ↗
96. 10.1016/S0921-5093(02)00176-410.1016/S0921-5093(02)00176-4 ↗
97. 10.1016/j.jmatprotec.2007.05.03910.1016/j.jmatprotec.2007.05.039 ↗
98. 10.1016/j.matdes.2006.12.00110.1016/j.matdes.2006.12.001 ↗
99. 10.1016/j.matlet.2007.07.06510.1016/j.matlet.2007.07.065 ↗
100. 10.1016/j.matdes.2007.07.00710.1016/j.matdes.2007.07.007 ↗