Rolling bearing steels – a technical and historical perspective
Source abstract
Abstract
Starting about 1920 it becomes easier to track the growth of bearing materials technology. Until 1955, with few exceptions, comparatively little progress was made in this area. AISI 52100 and some carburising grades (AISI 4320, AISI 9310) were adequate for most applications. The catalyst to quantum advances in high-performance rolling-element bearing steels was the advent of the aircraft gas turbine engine. With improved bearing manufacturing and steel processing together with lubrication technology, the potential improvements in bearing life can as much as 80 times that attainable in the late 1950s or as much as 400 times that attainable in 1940. This paper summarises the chemical, metallurgical and physical aspects of bearing steels and their effect on rolling bearing life and reliability: the single most important variable that has significantly increased bearing life and reliability is vacuum processing of bearing steel. Differences between through hardened, case carburised and corrosion resistant steels are discussed. The interrelation of alloy elements and carbides and their effect on bearing life are presented. An equation relating bearing life, steel hardness and temperature is given. Life factors for various steels are suggested and discussed. A relation between compressive residual stress and bearing life is presented. The effects of retained austenite and grain size are discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Gear and Bearing Dynamics Analysis · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
NASA Glenn Research Center Cleveland, OH 44135, USA
References (64)
Show source-provided references
1. Kelly BW · 1970 · 1
2. Bamberger EN · 1980 · 1
3. Anderson WJ · 1992 · 71
4. Stribeck R · ASME Trans. · 1907 · 29 · 420
5. Shaw MC, Macks EF: ‘Analysis and lubrication of bearings’; 1949, New York, McGraw-Hill Book Co.
6. Wilcock DF, Booser ER: ‘Bearing design and application’; 1957, New York, McGraw-Hill Book Co.
7. Moyer CA · 1992 · 47
8. 10.1115/1.320913210.1115/1.3209132 ↗
9. 10.1016/j.ijfatigue.2009.07.01210.1016/j.ijfatigue.2009.07.012 ↗
10. Lundberg G · Acta Polytech., Mech. Eng. Series · 1947 · 1 · 1
11. Zaretsky EV · 2010 · 45
12. Lundberg G · Acta Polytech., Mech. Eng. Series · 1952 · 2 · 243
13. ‘Load rating and fatigue life for roller bearings’, ANSI/AFBMA 11 – 1990, The Anti-Friction Bearing Manufacturers Association, Washington, DC, USA, 1990.
14. ‘Rolling bearing – dynamic load ratios and rating life’, ISO 281: 1990(E), International Organization for Standards, Geneva, Switzerland, 1990.
15. Zaretsky EV · 1997 · 325
16. Carter TL, Zaretsky EV, Anderson WJ: ‘Effect of hardness and other mechanical properties on rolling-contact fatigue life of four high- temperature bearing steels’, NASA TN D–270, National Aeronautics and Space Administration, Washington, DC, USA, 1960.
17. 10.1115/1.345166910.1115/1.3451669 ↗
18. 10.1520/STP36131S10.1520/STP36131S ↗
19. Bamberger EN, Zaretsky EV: ‘Fatigue lives at 600°F of 120- millimeter-bore ball bearings of AISI M–1, and WB–49 steels’, NASA TN D–6156, National Aeronautics and Space Administration, Washington, DC, USA, 1971.
20. 10.1520/STP26225S10.1520/STP26225S ↗
21. 10.2514/3.4446010.2514/3.44460 ↗
22. 10.2514/6.1985-113810.2514/6.1985-1138 ↗
23. Bamberger EN, Averbach BL, Pearson PK: ‘Improved fracture toughness bearings’, AFWAL TR–84–2103 (Avail. NTIS, AD–B094304L), 1985.
24. Bamberger EN · 1983 · 773
25. Philip TV · Power Transmission Des. · 1986 · 28 · 43
26. 10.1520/STP36134S10.1520/STP36134S ↗
27. 10.1080/1040200010898246610.1080/10402000108982466 ↗
28. 10.1080/1040200010898247610.1080/10402000108982476 ↗
29. Zaretsky EV · Tribol. Trans. · 2007 · 50 · 22510.1080/10402000701613799 ↗
30. Parker RJ, Zaretsky EV: ‘Reevaluation of the stress-life relation in rolling-element bearings’, NASA TN D–6745, National Aeronautics and Space Administration, Washington, DC, USA, 1972.
31. Zaretsky EV, Parker RJ, Anderson WJ: ‘Effect of component differential hardness on rolling-contact fatigue and load capacity’, NASA TN D–2640, National Aeronautics and Space Administration, Washington, DC, USA, 1965.
32. Chevalier JL, Dietrich MW, Zaretsky EV: ‘Short-term hot hardness characteristics of rolling-element steels’, NASA TN D–6632, National Aeronautics and Space Administration, Washington, DC, USA, 1972.
33. Chevalier JL, Dietrich MW, Zaretsky EV: ‘Hot hardness characteristics of ausformed AISI M–50, matrix II, WD–65, modified AISI 440–C, and super nitralloy’, NASA TN D–7244, National Aeronautics and Space Administration, Washington, DC, USA, 1973.
34. Anderson NE, Zaretsky EV: ‘Short-term hot-hardness characteristics of five case-hardened steels’, NASA TN D–8031, National Aeronautics and Space Administration, Washington, DC, USA, 1975.
35. Almen JO · 1962 · 400
36. Gentile AJ · AIME Trans. · 1965 · 233 · 1085
37. Gentile AJ, Martin AD: ‘The effect of prior metallurgically induced compressive residual stress on the metallurgical and endurance properties of overload-tested ball bearings’, ASME Paper 65–WA/CF–7, 1965.
38. Scott RL · 1962 · 301
39. Zaretsky EV, Parker RJ, Anderson WJ, Miller ST: ‘Effect on component differential hardness on residual stress and rolling–contact fatigue’, NASA TN D-3101, National Aeronautics and Space Administration, Washington, DC, USA, 1965.
40. Oswald FB, Zaretsky EV, Poplawski JV: ‘Relation between residual and hoop stresses and rolling bearing fatigue life’, Presented at the 2011 STLE Annual Meeting, Atlanta, Georgia, May2011.
41. Zaretsky EV · 1996 · 39 · 237
42. Zaretsky EV · STLE · 2010 · 66
43. ‘Rolling bearings—dynamic load ratings and rating life’, ISO 281: 2007. International Organization for Standardization, Geneva, Switzerland, 2007.
44. Sakai T: ‘Review and prospectsfor current studies on very high cycle fatigue of matallic materials for machine structure use’, Proc. 4th Int. Conf. on ‘Very high cycle fatigue (VHCF-4)’, 3–12; 2007, Ann Arbor, MI, TMS.
45. 10.2472/jsms.49.77910.2472/jsms.49.779 ↗
46. 10.1080/1040200080191803110.1080/10402000801918031 ↗
47. 10.1080/1040200090312534510.1080/10402000903125345 ↗
48. 10.1520/STP36140S10.1520/STP36140S ↗
49. Bush JJ · 1962 · 365
50. 10.1016/0043-1648(70)90176-610.1016/0043-1648(70)90176-6 ↗
51. 10.1016/0043-1648(85)90069-910.1016/0043-1648(85)90069-9 ↗
52. 10.1520/STP42598S10.1520/STP42598S ↗
53. Carter TL: ‘A study of some factors affecting rolling-contact fatigue life’, NASA TR R–60, National Aeronautics and Space Administration, Washington, DC, USA, 1960.
54. Irwin AS, Anderson WJ, Derner WJ: ‘Review and critical analysis—rolling-element bearings for system life and reliability’, NASA CR–174710, National Aeronautics and Space Administration, Washington, DC, USA, 1985.
55. 10.1115/1.366257410.1115/1.3662574 ↗
56. 10.1115/1.400252110.1115/1.4002521 ↗
57. 10.1520/STP26230S10.1520/STP26230S ↗
58. 10.1007/BF0291755210.1007/BF02917552 ↗
59. Parker RJ, Zaretsky EV, Dietrich MW: ‘Rolling-element fatigue lives of four M-series steels and AISI 52100 at 150°F’, NASA TN D–7033, National Aeronautics and Space Administration, Washington, DC, USA, 1971.
60. Parker RJ, Zaretsky EV, Dietrich MW: ‘Rolling-element fatigue lives of AISI T–1, AISI M-42, AISI 52100, and Halmo at 150°F’, NASA TN D–6179, National Aeronautics and Space Administration, Washington, DC, USA, 1971.
61. Chevalier JL, Zaretsky EV: ‘Effect of Carbide size, area, and density on rolling-element fatigue’, NASA TN D–6835, National Aeronautics and Space Administration, Washington, DC, USA, 1972.
62. 10.1115/1.345180810.1115/1.3451808 ↗
63. Parker RJ, Bamberger EN: ‘Effect of carbide distribution on rolling-element fatigue life of AMS 5749’, NASA TP–2189, National Aeronautics and Space Administration, Washington, DC, USA, 1983.
64. 10.1115/1.326119810.1115/1.3261198 ↗