Critical Assessment 7: Quenching and partitioning
Source abstract
Abstract
Quenching and partitioning is a relatively new heat treatment concept to generate microstructures containing retained austenite stabilised by carbon partitioning from martensite. Research on quench and partitioning has been conducted by numerous groups, and this critical assessment provides some of the authors’ perspectives on progress and understanding in the field, with particular focus on the physical metallurgy and transformation mechanisms, process variations, mechanical behaviour, and industrial implementation. While much progress has been made, the field provides rich opportunity for further understanding and development.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Colorado School of Mines, Advanced Steel Processing and Products Research Center, 1500 Illinois St., Golden, CO 80401, USA
Los Alamos National Laboratory, Materials Science and Technology Division, PO Box 1663, Los Alamos, NM 87545, USA
References (100+)
Show source-provided references
1. 10.1016/S1359-6454(03)00059-410.1016/S1359-6454(03)00059-4 ↗
2. 10.1007/s11661-008-9609-z10.1007/s11661-008-9609-z ↗
3. Streicher AM, Speer JG, Matlock DK and de Cooman BC: Proc. Int. Conf. on ‘Advanced high strength sheet steels for automotive applications’, Warrendale, PA, USA, AIST, 2004, 51–62.
4. Speer JG, Streicher AM, Matlock DK, Rizzo F and Krauss G: ‘Austenite formation and decomposition’, Warrendale, PA, USA, ISS/TMS, 2003, 505–522.
5. Hillert M · Acta Mater. · 2004 · 50 · 697
6. 10.1016/j.scriptamat.2004.08.02910.1016/j.scriptamat.2004.08.029 ↗
7. Hillert M · Acta Mater. · 2005 · 52 · 87
8. 10.1016/j.cossms.2004.09.00310.1016/j.cossms.2004.09.003 ↗
9. 10.1016/j.scriptamat.2009.03.02110.1016/j.scriptamat.2009.03.021 ↗
10. Clarke AJ, Speer JG, Matlock DK, Rizzo FC, Edmonds DV and He K: Solid-solid phase transformations in inorganic materials, (ed. Howe J M et al.), 99–108; 2005, Warrendale, PA, TMS.
11. 10.1016/j.actamat.2009.06.02410.1016/j.actamat.2009.06.024 ↗
12. 10.1016/0001-6160(59)90170-110.1016/0001-6160(59)90170-1 ↗
13. 10.2355/isijinternational.52.16410.2355/isijinternational.52.164 ↗
14. 10.1007/s11661-011-0706-z10.1007/s11661-011-0706-z ↗
15. 10.1016/j.actamat.2012.01.05510.1016/j.actamat.2012.01.055 ↗
16. 10.1016/j.scriptamat.2012.10.01710.1016/j.scriptamat.2012.10.017 ↗
17. 10.1016/j.scriptamat.2013.05.03510.1016/j.scriptamat.2013.05.035 ↗
18. 10.1080/14786435.2013.77551810.1080/14786435.2013.775518 ↗
19. 10.1016/j.actamat.2007.08.05110.1016/j.actamat.2007.08.051 ↗
20. 10.1016/j.jallcom.2013.01.20510.1016/j.jallcom.2013.01.205 ↗
21. 10.4028/www.scientific.net/SSP.172-174.82710.4028/www.scientific.net/SSP.172-174.827 ↗
22. 10.1016/j.actamat.2013.10.06410.1016/j.actamat.2013.10.064 ↗
23. 10.1016/j.scriptamat.2013.02.05810.1016/j.scriptamat.2013.02.058 ↗
24. 10.1179/1743284714Y.000000054610.1179/1743284714Y.0000000546 ↗
25. Zhong N · Mater. Sci. Technol. · 2006 · 22 · 751
26. Speer JG · Philos. Mag. Lett. · 2007 · 87 · 37010.1080/09500830701194173 ↗
27. de Moor E, Penning J, Föjer C, Clarke AJ and Speer JG: Proc. Int. Conf. on ‘New developments in advanced high-strength sheet steels’, Warrendale, PA, USA, 2008, AIST, 199–207.
28. 10.1007/s11661-009-9891-410.1007/s11661-009-9891-4 ↗
29. 10.1016/j.actamat.2011.06.01410.1016/j.actamat.2011.06.014 ↗
30. 10.1007/s11661-011-0869-710.1007/s11661-011-0869-7 ↗
31. Pinto da Silva E, Xu W, Föjer C, Houbaert Y, Sietsma J and Petrov RH: Mater. Char., to be published, doi: 10·1016/j.matchar.2014·06·003.
32. 10.1016/j.actamat.2010.09.04210.1016/j.actamat.2010.09.042 ↗
33. 10.1007/s11661-012-1087-710.1007/s11661-012-1087-7 ↗
34. 10.1016/j.matchar.2008.04.00410.1016/j.matchar.2008.04.004 ↗
35. 10.1007/s11661-008-9701-410.1007/s11661-008-9701-4 ↗
36. 10.1016/j.actamat.2014.05.03210.1016/j.actamat.2014.05.032 ↗
37. 10.1016/j.scriptamat.2012.08.00710.1016/j.scriptamat.2012.08.007 ↗
38. 10.1016/j.jallcom.2012.02.13010.1016/j.jallcom.2012.02.130 ↗
39. 10.1103/PhysRevB.82.10421010.1103/PhysRevB.82.104210 ↗
40. 10.1016/j.jallcom.2012.05.03810.1016/j.jallcom.2012.05.038 ↗
41. 10.1007/s11661-012-1420-110.1007/s11661-012-1420-1 ↗
42. 10.1016/j.scriptamat.2011.07.04110.1016/j.scriptamat.2011.07.041 ↗
43. 10.1016/j.msea.2011.10.12510.1016/j.msea.2011.10.125 ↗
44. Thomas GA, Speer JG, Matlock DK, Krauss G and Hackenberg RE: ICOMAT, 2010, 595–600.
45. 10.2355/isijinternational.51.168810.2355/isijinternational.51.1688 ↗
46. Thomas GA · AIST Trans. · 2008 · 5 · 209
47. Speer JG · J. Jap. Soc. Heat Treatment (Special Issue: Proc. 17th IFHTSE Congress) · 2009 · 49 · 415
48. 10.1016/j.msea.2012.08.13010.1016/j.msea.2012.08.130 ↗
49. 10.4028/www.scientific.net/MSF.762.8310.4028/www.scientific.net/MSF.762.83 ↗
50. 10.4028/www.scientific.net/MSF.706-709.282410.4028/www.scientific.net/MSF.706-709.2824 ↗
51. 10.4028/www.scientific.net/MSF.654-656.8210.4028/www.scientific.net/MSF.654-656.82 ↗
52. 10.1016/j.msea.2014.04.03010.1016/j.msea.2014.04.030 ↗
53. Groβe-Heilmann NIZylia · Steel Proper. Applic. Conf. Proc., AIST · 2012 · 133
54. 10.4028/www.scientific.net/MSF.788.34010.4028/www.scientific.net/MSF.788.340 ↗
55. 10.1016/j.matchar.2010.12.00310.1016/j.matchar.2010.12.003 ↗
56. 10.1016/j.scriptamat.2010.12.03710.1016/j.scriptamat.2010.12.037 ↗
57. 10.3724/SP.J.1037.2013.0030110.3724/SP.J.1037.2013.00301 ↗
58. 10.1007/s11431-012-4884-810.1007/s11431-012-4884-8 ↗
59. 10.1007/s11431-013-5206-510.1007/s11431-013-5206-5 ↗
60. 10.4028/www.scientific.net/MSF.561-565.228310.4028/www.scientific.net/MSF.561-565.2283 ↗
61. 10.1016/j.msea.2008.11.01410.1016/j.msea.2008.11.014 ↗
62. Hsu (Z. Xu) TY and Jin X: ‘Advanced steels’, 67–73; 2011, Berlin, Springer-Verlag.10.1007/978-3-642-17665-4_8 ↗
63. 10.4028/www.scientific.net/MSF.738-739.22810.4028/www.scientific.net/MSF.738-739.228 ↗
64. 10.4028/www.scientific.net/MSF.426-432.108910.4028/www.scientific.net/MSF.426-432.1089 ↗
65. 10.1016/j.msea.2010.02.02610.1016/j.msea.2010.02.026 ↗
66. 10.1016/j.jallcom.2012.02.01610.1016/j.jallcom.2012.02.016 ↗
67. 10.1002/srin.20110012510.1002/srin.201100125 ↗
68. Krauss G: personal communication, Colorado School of Mines, 2014.
69. 10.1016/j.msea.2012.08.06410.1016/j.msea.2012.08.064 ↗
70. 10.1016/j.msea.2010.06.04510.1016/j.msea.2010.06.045 ↗
71. 10.1007/s11661-013-1929-y10.1007/s11661-013-1929-y ↗
72. 10.1016/j.scriptamat.2007.10.04510.1016/j.scriptamat.2007.10.045 ↗
73. 10.1016/j.scriptamat.2013.10.01910.1016/j.scriptamat.2013.10.019 ↗
74. 10.1007/s11661-014-2405-z10.1007/s11661-014-2405-z ↗
75. Matlock DK and Speer JG: Proc. 3rd Int. Conf. on ‘Structural Steels’, (ed. Lee H C), 774–781; 2006, Seoul, The Korean Institute of Metals and Materials.
76. 10.1007/978-1-84882-454-6_1110.1007/978-1-84882-454-6_11 ↗
77. de Moor E, Speer JG, Matlock DK, Föjer C and Penning J: Proc. Mater. Sci. Technol. 1554–1563; 2009, Stoughton, WI, The Printing House.
78. van de Putte T, Borissov D, Loison D, Penning J, Rohwerder M and Claessens S: Proc. Int. Conf. on ‘New developments in advanced high-strength sheet steels’, (ed. Speer J G et al.), 69–80; 2008, Warrendale, PA, AIST.
79. 10.1007/s11661-008-9636-910.1007/s11661-008-9636-9 ↗
80. 10.2355/isijinternational.51.13710.2355/isijinternational.51.137 ↗
81. Santofimia MJ, Nguyen-Minh T, Zhao L, Hanlon DN, Kop TA and Sietsma J: Proc. Int. Conf. on ‘New developments in advanced high-strength sheet steels’, (ed. Speer J G et al.), 191–198; 2008, Warrendale, PA, AIST.
82. de Knijf D, Petrov R, Föjer C and Kestens LAI: Proc. Int. Symp. on ‘New developments in advanced high-strength sheet steels’, (ed. de Moor E et al.), 185–195; 2013, Warrendale, PA, AIST.
83. Thomas GA, de Moor E and Speer JG: Proc. Int. Symp. on ‘New developments in advanced high-strength sheet steels’, (ed. De Moor E et al.), 153–165; 2013, Warrendale, PA, AIST.
84. Martins AR · Proc. Conf. MS&T · 2009 · 1564
85. 10.1007/s11661-010-0184-810.1007/s11661-010-0184-8 ↗
86. 10.4028/www.scientific.net/MSF.706-709.273410.4028/www.scientific.net/MSF.706-709.2734 ↗
87. de Moor E, Matlock DK, Speer JG, Föjer C and Penning J: SAE Tech. Publ. #2012-01-0530, SAE, Warrendale, PA, USA, 2012.
88. Johnson RJ, de Moor E, Fonstein N, Hanlon DN and Pichler A: Proc. Int. Symp. on ‘New developments in advanced high-strength sheet steels’, (ed. De Moor E et al.), 71–83; 2013, Warrendale, PA, AIST.
89. 10.1016/j.scriptamat.2012.11.00310.1016/j.scriptamat.2012.11.003 ↗
90. 10.1016/j.scriptamat.2010.04.04910.1016/j.scriptamat.2010.04.049 ↗
91. 10.1007/s11661-014-2316-z10.1007/s11661-014-2316-z ↗
92. 10.1007/s11661-011-0648-510.1007/s11661-011-0648-5 ↗
93. 10.2355/isijinternational.52.137710.2355/isijinternational.52.1377 ↗
94. 10.3365/MMI.2007.12.43910.3365/MMI.2007.12.439 ↗
95. 10.1007/s11661-013-2113-010.1007/s11661-013-2113-0 ↗
96. Marschall CW · Trans. Am. Soc. Met. · 1962 · 55 · 135
97. 10.2355/isijinternational.51.156910.2355/isijinternational.51.1569 ↗
98. 10.1007/BF0265348810.1007/BF02653488 ↗
99. 10.2355/isijinternational.38.127710.2355/isijinternational.38.1277 ↗
100. Bouchaud F, Aichoun N, Mauguin J and Corre S: Proc. Int. Symp. on ‘Recent developments in plate steels’, (ed. Speer J G et al.), 273–283; 2011, Warrendale, PA, AIST.