Microstructure and mechanical properties of nickel based superalloy IN718 produced by rapid prototyping with electron beam melting (EBM)
Source abstract
Abstract
A nickel alloy of a composition similar to that of the nickel based superalloy Inconel alloy 718 (IN718) was produced with the electron beam melting (EBM) process developed by Arcam AB. The microstructures of the as processed and heat treated material are similar to that of conventionally produced IN718, except that the EBM material showed some porosity and the δ phase did not dissolve during the solution heat treatment because the temperature of 1000°C apparently was too low. Mechanical testing of the layer structured material, parallel and perpendicular to the built layers, revealed sufficient strength in both directions. However, it showed only limited elongation when tested perpendicular to the built layers due to local agglomerations of pores. Otherwise, data for the hardness, Young's modulus, 0·2 yield tensile strength and ultimate tensile strength match those recommended for IN718.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Technology Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-Straße 1, 40237 Düsseldorf, Germany
VDEh-Betriebsforschungsinstitut GmbH Sohnstr. 65, 40237 Düsseldorf, Germany
References (21)
Show source-provided references
1. 10.1016/j.ijmachtools.2005.09.00510.1016/j.ijmachtools.2005.09.005 ↗
2. Arcam Ab: Krokslätts Fabriker, Mölndal, Sweden, available at: http://www.arcam.com (accessed 2009).
3. Matz JE: ‘Carbide formation in a nickel-based superalloy during electron beam solid freeform fabrication’, PhD thesis, Massachusetts Institute of Technology, MA, USA, 1999.
4. 10.1016/S1359-6454(00)00367-010.1016/S1359-6454(00)00367-0 ↗
5. Griffith ML, Ensz MT, Puskar JD, Robino CV, Brooks JA, Philliber JA, Smugeresky JE, Hofmeister WH: ‘Understanding the microstructure and properties of components fabricated by laser engineering net shaping (LENS)’, Proc.Solid Freeform and Additive Fabrication – 2000 Symposium, San Francisco, CA, USA, April 2000, Materials Research Society, paper no. 2, 625, 9–20.10.1557/PROC-625-9 ↗
6. 10.1016/j.jmatprotec.2005.05.00510.1016/j.jmatprotec.2005.05.005 ↗
7. 10.1016/j.msea.2007.05.07910.1016/j.msea.2007.05.079 ↗
8. Lippard HE, Jones RF: ‘Characterization and thermomechanical processing of sprayformed Allvac. 720 alloy’, Proc. 9th Int. Symp. on ‘Superalloys 2000’, Champion, PA, USA, September 2000, TMS, 151–157.10.7449/2000/Superalloys_2000_151_157 ↗
9. 10.1016/j.matchar.2008.03.01710.1016/j.matchar.2008.03.017 ↗
10. 10.1016/j.jmatprotec.2007.10.05110.1016/j.jmatprotec.2007.10.051 ↗
11. 10.1016/S0921-5093(01)01278-310.1016/S0921-5093(01)01278-3 ↗
12. 10.1016/j.msea.2007.07.01210.1016/j.msea.2007.07.012 ↗
13. Technical bulletin: ‘Inconel alloy 718’, Publication number SMC-045, Special Metals Corporation, available at: http://www.specialmetals.com (accessed September 2007).
14. Kirkman I · JISI · 1969 · 207 · 1612
15. Sims CT, Stoloff NS, Hagel W: ‘Superalloys II’, 180–181; 1987, New York, NY, John Wiley & Sons, Inc.
16. Sundararaman M · Metall. Trans. A · 2002 · 19 · 45310.1007/BF02649259 ↗
17. 10.1016/j.matchar.2004.07.00410.1016/j.matchar.2004.07.004 ↗
18. 10.7449/2001/Superalloys_2001_421_43210.7449/2001/Superalloys_2001_421_432 ↗
19. 10.1016/S0921-5093(00)01470-210.1016/S0921-5093(00)01470-2 ↗
20. 10.1016/j.scriptamat.2008.07.00410.1016/j.scriptamat.2008.07.004 ↗
21. 10.1016/0001-6160(81)90129-210.1016/0001-6160(81)90129-2 ↗