Development of superalloys
Source abstract
Abstract
The development of what are now termed superalloys is reviewed from the early days of high-temperature alloys in the light of the demands of engineers for materials to serve under differing conditions of stress, temperature, and environment. Before the introduction of the aircraft gas turbine the main interest lay in the field of low-alloy creep resisting steels for steam raising plant or in heat resistant alloys for relatively low-stressed furnace components. Piston aeroengines posed two problems – the exhaust valve and the turbo supercharger rotor – and special materials for these components were introduced, largely on the basis of high-temperature tensile strength. The gas turbine demanded high creep resistance and two main lines of alloy development were followed: carbide-hardened iron or cobalt-base alloys and γ′-hardened nickel-base alloys. The latter type has surpassed the former and now, either in wrought form or, predominantly for the most severe conditions, as castings, is the mainstay of superalloy applications. In recent years, progress has mainly been sought by the improvement of macrostructure: in castings by directional solidification to give columnar crystals or single crystals and in wrought products by powder technology. Severe hot corrosion has been combated by the application of protective surface coatings and the development of a series of wrought and cast high-chromium nickel-base alloys. It is anticipated that future progress in high-temperature materials technology will be sought in the application of a variety of metallurgical and physical techniques to specific engineering components in much the same manner as was done with the aeroengine exhaust valve of 50 years ago.MST/511
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Additive Manufacturing Materials and Processes · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. MARSH A. L. · British Patent 2129, 1906
2. BOLLENRATH F. · Metallwirtschaft · 1938 · 1 · 755
3. NORTON LORD KINGS · J. R. Soc. Arts · 1985 · 133 · 705
4. WHITTLE F. · British Patent 347, 206, 1930
5. TAPSELL H. J. · Engineering, 1925, 120, 614-615, 648-649, 746-747.
6. ROHN W. · British Patent 286, 367, Heraeus Vacuum Schmelze AG, 1926
7. PILLING N. B. · US Patent 2,048,163, International Nickel Co. Inc., 1929
8. CHEVENARD P. · Comptes Rendus · 1929 · 189 · 846
9. PFEIL L. B. · British Patent 583,162, Mond Nickel Co. Ltd, 1940
10. W. BETTERIDGE and J. HESLOP (eds): ‘The Nimonic alloys’, 2 edn; 1974, London, Edward Arnold.
11. BIEBER C. G. · US Patent 2,515,185, International Nickel Co. Inc., 1941
12. TAYLOR A. · J. Inst. Met., · 1951 · 80 · 577
13. TAYLOR A. · J. Inst. Met., · 1952 · 81 · 451
14. TAYLOR A. · Trans AIME · 1956 · 206 · 1356
15. TAYLOR A. · Trans. AIME · 1957 · 209 · 72
16. BETTERIDGE W. · J. Inst. Met., · 1956 · 85 · 473
17. FELL E. A. · Metallurgia · 1961 · 63 · 157
18. DARMARA F. N. · J. Met., · 1967 · 19 · 42
19. SEJOURNET J. · British Patent 607,285, Societe d'Electro-Chimie, d'Electro Metallurgic et des Acieries Electriques d'Ugine/Comptoir Industrial d'Etirage et Profilage de Metaux, 1948
20. COOK R. M. · Metallurgia · 1963 · 67 · 109
21. GITTUS J. H. · Met. Treat. Drop Forging · 1960 · 27 · 15
22. BRADBURY E. J. · Metall. Ital., · 1966 · 58 · 185
23. M. R. · 1st World Conference on ‘Investment casting’, London, May 1966, British Investment Casters Tech. Assn
24. coca A. M. · Foundry Trade J., · 1966 · 120 · 686
25. SHAW S. W. K. · British Patent 963,521, International Nickel Co. (Mond) Ltd, 1962
26. w S. · British Patent 1,087,051, International Nickel Ltd, 1963
27. QUIGG R. J. · British Patent 1,260,982, TRW Inc., 1970
28. VERSNYDER F. L. · Trans ASM · 1960 · 52 · 485
29. alcHARDs E. G. · J. Inst. Met., · 1968 · 96 · 365
30. NORTHWOOD J. E. · Metall. Met. Form., · 1979 · 46 · 437
31. KRAFT R. W. · US Patent 3,124,452, United Aircraft Co., 1960
32. THOMPSON E. R. · Trans ASM · 1969 · 62 · 140
33. BIBRING H. · Métn. Sci. Rev. Metall · 1972 · 69 · 343
34. M. MCLEAN: ‘Directionally solidified materials for high temperature service’; 1983, London, The Metals Society.
35. FONTAINE P. I. · J. Inst. Met., · 1973 · 101 · 181
36. CROMBIE E. A. · in Proc., 12th Inst. CIMAC, May 1977, Tokyo, C, 2515-2542
37. SHAW S. W. K. · British Patent 1,367,661, 1971
38. SHAW S. W. K. · Met. Prog., · 1979 · 115 · 47
39. SHAW S. W. K. · British Patent 1,544,720, 1977
40. MAXWELL D. H. · Metall. Met. Form., · 1975 · 42 · 332
41. straw S. W. K. · European Patent 53,948, 1980
42. ANGUS H. C. · Engineering · 1970 · 208 · 472
43. MASON J. J. · Metall · 1977 · 7 · 713
44. smiTH D. F. · 2Low-expansion superalloys', Technical Report, -Huntington Alloys.
45. BENJAMIN J. S. · Metall. Trans., · 1970 · 1 · 294310.1007/BF03037835 ↗
46. M. GELL et al. (eds): ‘Superalloys 1984'; 1984, Warrendale, Pa, The Metallurgical Society of AIME.