Effect of morphology of martensite–austenite phase on fracture of weld heat affected zone in vanadium and niobium microalloyed steels
Source abstract
Abstract
In multipass welding, the intercritically reheated coarse grained heat affected zone (HAZ) demonstrates the worst toughness in the welded joint, since it contains a high carbon martensite with some retained austenite, known as M–A phase, which is brittle and associated with the high cooling rates following welding. The purpose of the present work was to explore those aspects of the morphology of the M–A phase which determined the ease or otherwise of crack development in welded vanadium and niobium high strength low alloy steels. Four steels were subjected to heat treatment to simulate the microstructure of an intercritically reheated coarse grained HAZ. The toughness of the simulated intercritically reheated coarse grained HAZ was assessed using both Charpy and CTOD tests. Microstructural features were characterised by scanning and transmission electron microscopy and optical microscopy. Fractographic examination of the Charpy and CTOD specimens were carried out to understand the micromechanism of fracture under different microstructural and test conditions. Evidence of both cracking and debonding of M–A phase and carbides was found, and many of the cracks appeared to develop by linking up of voids resulting from debonding. The importance of the dihedral angle 2 θ in determining the interfacial energy of the two main morphologies of the M–A phase, blocky and elongated stringer particles, was considered. While both carbides and inclusions were observed, these features appear to have a minor role in determining the degree of toughness of the steels.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Metallurgy and Engineering Materials GroupDepartment of Mechanical Engineering, University of Strathclyde, Glasgow G1 1XN, UK now Vanitec, Winterton House, High Street, Westerham, Kent, TN16 1AQ, UK
Metallurgy and Engineering Materials GroupDepartment of Mechanical Engineering, University of Strathclyde, Glasgow G1 1XN, UK now Vanitec, Winterton House, High Street, Westerham, Kent, TN16 1AQ, UK;, Email: neville.baker@strath.ac.uk
References (54)
Show source-provided references
1. Liu C. T. · Trans. ASM · 1968 · 61 · 156
2. Görrissen J. · J. Iron Steel Inst · 1949 · 162 · 16
3. Allen N. P. · J. Iron Steel Inst · 1953 · 174
4. Hahn G. T. · J. Iron Steel Inst · 1962 · 200 · 634
5. 10.1016/0001-6160(65)90121-510.1016/0001-6160(65)90121-5 ↗
6. 10.1179/03071697980327624610.1179/030716979803276246 ↗
7. Mintz B., Morrison W. B., and Cochrane R. C.: in ‘Advances in the physical metallurgy and applications of steels’, 222-228; 1982, London, The Metals Society.
8. 10.1179/mst.1987.3.10.84510.1179/mst.1987.3.10.845 ↗
9. 10.1179/mst.1994.10.2.8910.1179/mst.1994.10.2.89 ↗
10. Almond E. A., Timbres D. H., and Embury J. D.: Proc. 2nd Int. Conf. on ‘Fracture’, (ed P. L. Pratt),Vol. 6, 253; 1969, London, Chapman and Hall.
11. Petch N. J. · Metall · 1986 · 3
12. Bingley M. S., and Siwecki T.: Proc 8th Int. Conf. on ‘Strength of metals and alloys’,Vol. 3, 1191–1196; 1988, Oxford, Pergamon.10.1016/B978-0-08-034804-9.50188-1 ↗
13. 10.1179/02670830110151042910.1179/026708301101510429 ↗
14. 10.1179/mst.1991.7.11.100510.1179/mst.1991.7.11.1005 ↗
15. Stevenson R.: in ‘Formable HSLA and dual phase steel’, (ed.Davenport A. T.), 101-109; 1979, New York, AIME.
16. Grong Ø. · Met. Constr · 1986 · 18 · 557
17. 10.1179/mst.1987.3.8.64910.1179/mst.1987.3.8.649 ↗
18. Akselsen Ø. M. · Scand. J. Metall · 1990 · 19 · 258
19. 10.1007/BF0265175910.1007/BF02651759 ↗
20. Davis C. L., and King J. E.: Metall Trans. 1994, 25A, 563–573.10.1007/BF02651598 ↗
21. 10.1007/BF0265235110.1007/BF02652351 ↗
22. Haze T., Aihara S., and Mabuchi H. ‘Accelerated cooling of rolled steel’, (ed.Southwick P. D.), 235-247; 1986, Warrendale, PA, TMS.
23. 10.1007/BF0335095610.1007/BF03350956 ↗
24. 10.1179/mst.1993.9.1.810.1179/mst.1993.9.1.8 ↗
25. Li Y., Crowther D. N., Green M. J. W., Mitchell P. S., and Baker T. N.: ISIJ Int. 2001, 41, 46–55.10.2355/isijinternational.41.46 ↗
26. 10.1007/s11661-998-0136-810.1007/s11661-998-0136-8 ↗
27. 10.1007/BF0283033810.1007/BF02830338 ↗
28. 10.1007/s11661-004-1007-610.1007/s11661-004-1007-6 ↗
29. Lambert-Perlade A., Drillet J., Gourgues A. F., Sturel T., and Pineau A.: Sci Technol Weld Join. 2000, 5, 168–173.10.1179/136217100101538164 ↗
30. Uchino K., and Ohno Y.: Proc. 6th Int. Conf. on ‘Offshore mechanics and arctic engineering’, Houston, TX, USA, March 1987, ASME,159–165.
31. Akselsen Ø. M. · Scand. J. Metall · 1988 · 17 · 194
32. Chen J. H., Kituta Y., Araki T., Yoneda M., and Matsuda Y.: Acta Metall. 1984, 32, 1779–1788.10.1016/0001-6160(84)90234-7 ↗
33. 10.1520/JTE1209710.1520/JTE12097 ↗
34. 10.1179/msc.1979.13.6.34110.1179/msc.1979.13.6.341 ↗
35. 10.1179/03063458479042038410.1179/030634584790420384 ↗
36. 10.1111/j.1460-2695.2006.00996.x10.1111/j.1460-2695.2006.00996.x ↗
37. 10.1016/0013-7944(84)90153-X10.1016/0013-7944(84)90153-X ↗
38. 10.1007/s11661-003-0238-210.1007/s11661-003-0238-2 ↗
39. 10.1016/j.nucengdes.2004.02.00310.1016/j.nucengdes.2004.02.003 ↗
40. ‘Standard test method for determination of reference temperature, to, for ferritic steels in the transition range’, E 1921-97, ASTM, Philadelphia, PA, USA, 1997.
41. Wallin K., Bannister A., and Nevasmaa P.: Proc. BALTICA IV, 1998, Helsinki-Stockholm, VTT Manufacturing Technology.
42. 10.1016/S0013-7944(99)00009-010.1016/S0013-7944(99)00009-0 ↗
43. Ranade R. S. · J. Phys · 1995 · 5 · 311
44. Amin R. K., and Pickering F. B. ‘Themomechanical processing of microalloyed austenite’, (ed A. J. DeArdo et al), 377-403; 1982, Warrendale, PA, The Metallurgical Society of AIME.
45. Lanzillotto C. A. N. · Met. Set · 1982 · 16 · 371
46. Aihara S., and Okamoto K. ‘Influence of local brittle zone on HAZ toughness of TMCP steels’, in ‘Bulletin 373’, 33-43; 1992, New York, Welding Research Council.
47. 10.1007/s11661-997-0164-910.1007/s11661-997-0164-9 ↗
48. Hrivnak I. · Trans. JERI · 1992 · 21 · 9
49. Hrivnak I: ISIJ Int. 1995, 35, 1148–1156.10.2355/isijinternational.35.1148 ↗
50. Smith C. S. · Trans. Am. Inst. Min. Met. Eng · 1948 · 175 · 15
51. Davy L. T. G. · J. Aust. Inst. Met · 1968 · 13 · 71
52. Gladman T., Dulieu D., and McIvor I. D.: Proc. ‘Microalloying’ 75’, 32-58; 1977, New York, Union Carbide Corp.
53. 10.1179/mst.1986.2.6.57610.1179/mst.1986.2.6.576 ↗
54. 10.1007/BF0265724410.1007/BF02657244 ↗