journal article·2007-09

Welding residual stresses in ferritic power plant steels

J. A. Francis, H. K. D. H. Bhadeshia, P. J. Withers

Materials Science and Technology· Volume 23· Issue 9
Publisher page

Abstract

Many of the degradation mechanisms relevant to power plant components can be exacerbated by stresses that reside within the material. Good design or structural integrity assessments require therefore, an accounting of residual stresses, which often are introduced during welding. To do this it is necessary to characterise the stresses, but this may not be possible in thick components using non-destructive methods. These difficulties, and a paucity of relevant engineering data, have led to an increasing emphasis on the development and validation of suitable modelling tools. Advances are prominent in the estimation of welding residual stresses in austenitic stainless steels. The progress has been less convincing in the case of ferritic alloys, largely due to the complexities associated with the solid state phase transformations that occur in multipass welding. We review here the metallurgical issues that arise in ferritic steel welds, relate these to the difficulties in calculating residual stresses, and highlight some stimulating areas for future research.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. 10.1179/02670830110150998010.1179/026708301101509980 ↗
2. 10.1179/02670830110151008710.1179/026708301101510087 ↗
3. Radaj D. ‘Heat effects of welding — temperature field, residual stress, distortion’, 1-18; 1992, Berlin Heidelberg, Springer-Verlag.10.1007/978-3-642-48640-1_1 ↗
4. 10.1016/j.ijfatigue.2003.08.02010.1016/j.ijfatigue.2003.08.020 ↗
5. 10.1002/mawe.20050093310.1002/mawe.200500933 ↗
6. 10.1115/1.148103510.1115/1.1481035 ↗
7. 10.1016/0308-0161(84)90028-010.1016/0308-0161(84)90028-0 ↗
8. 10.1016/0013-7944(89)90212-910.1016/0013-7944(89)90212-9 ↗
9. 10.1080/1023816041000173444110.1080/10238160410001734441 ↗
10. 10.1016/j.actamat.2003.08.02210.1016/j.actamat.2003.08.022 ↗
11. 10.1243/030932400151443110.1243/0309324001514431 ↗
12. 10.1179/174328006X7946310.1179/174328006X79463 ↗
13. 10.1023/A:102657440085810.1023/A:1026574400858 ↗
14. 10.1243/030932400151442210.1243/0309324001514422 ↗
15. Duranton P., Devaux J., Robin V., Gilles P., and Bergheau J. M. ‘3D modelling of multipass welding of a 316L stainless steel pipe’, J. Mater. Process. Technol., 2004, 153-154,457–463.10.1016/j.jmatprotec.2004.04.128 ↗
16. 10.1016/j.ijpvp.2004.08.00310.1016/j.ijpvp.2004.08.003 ↗
17. Kohno R., and Jones S. B. ‘An initial study of arc energy and thermal cycles in the submerged arc welding of steel’, Technical report 81/1978/PE, The Welding Institute, Abington, Cambridge, England, 1978.
18. Mannan S. L. · Trans. Ind. Inst. Met · 1996 · 49 · 303
19. 10.1179/174328406X14877810.1179/174328406X148778 ↗
20. Karthik V., Kasiviswanathan K. V., Laha K., and Raj B. ‘Determination of gradients in mechanical properties of 2.25Cr-1Mo weldments using shear-punch tests’, Weld J, 2002,81, (12), 265S-272S.
21. Lancaster J. F. ‘Metallurgy of welding’, 6th edn, 211-309; 1999, Abington, Cambridge, Abington Publishing.10.1533/9781845694869.211 ↗
22. Nanstad R. K., McCabe D. E., Sokolov M. A., English C. A., and Ortner S. R. ‘Comparison of effects of thermal aging, irradiation, and thermal annealing on the propensity for temper embrittlement on an RPV submerged-arc weld HAZ’, ORNL Letter report ORNL/NRC/LTR-01/07, Oak Ridge National Laboratory, December 2001.
23. 10.1179/09506600422502193610.1179/095066004225021936 ↗
24. 10.1179/13621710010153815510.1179/136217100101538155 ↗
25. 10.1533/wint.2003.310010.1533/wint.2003.3100 ↗
26. 10.1179/13621710322500555210.1179/136217103225005552 ↗
27. 10.1016/j.ijpvp.2006.03.00510.1016/j.ijpvp.2006.03.005 ↗
28. Hunt A. C., Kluken A. O., and Edwards G. R. ‘Heat input and dilution effects in microalloyed steel weld metals’, Weld. 1, 1994,73, (1), S9—S15.
29. Easterling K. ‘Introduction to the physical metallurgy of welding’, 2nd edn, 1-54; 1992, Oxford, Butterworth Heinemann.10.1016/B978-0-7506-0394-2.50006-X ↗
30. 10.1016/S0029-5493(00)00440-410.1016/S0029-5493(00)00440-4 ↗
31. Bhadeshia H. K. D. H. ‘Steels — microstructure and properties’, 3rd edn; 2006, Oxford, Elsevier.10.1016/B978-075068084-4/50016-9 ↗
32. Kirkaldy J. S., and Venugopalan D. ‘Prediction of microstructure and hardenability in low alloy steels’, in ‘Phase transformations in ferrous alloys’, (eds. A. R. Marder and J. I. Goldstein), 125-148; 1984, New York, AIME.
33. 10.1007/s11663-998-0101-310.1007/s11663-998-0101-3 ↗
34. Zener C. · Trans. AIME · 1946 · 167 · 550
35. Hillert M. · Jernkont. Ann · 1957 · 141 · 557
36. Andrews K. W. · J. Iron Steel Inst · 1969 · 203 · 721
37. Kim J.S., Lee S.H., and Jin T.E. ‘Fatigue evaluation of dissimilar welds on nuclear components’, Proc. 17th Int. Conf. on ‘Structural mechanics in reactor technology’ (SMiRT 17), Prague, Czech Republic, August 2003, International Association for Structural Mechanics in Reactor Technology, Paper D03-2.
38. 10.1016/0001-6160(84)90211-610.1016/0001-6160(84)90211-6 ↗
39. Bhadeshia H. K. D. H. ‘Developments in martensitic and bainitic steels: role of the shape deformation’, Mater. Sci. Eng. A, 2004, A378, (1-2),34–39.10.1016/j.msea.2003.10.328 ↗
40. 10.1016/0022-5096(86)90009-810.1016/0022-5096(86)90009-8 ↗
41. Greenwood G. W. · Proc. Royal Soc · 1965 · 238 · 403
42. 10.1038/195138a010.1038/195138a0 ↗
43. 10.1016/0001-6160(53)90083-210.1016/0001-6160(53)90083-2 ↗
44. Magee C. L. ‘Phase transformations’, (eds. V. F. Zackay and H. I. Aaronson), 115-156; 1970, Metals Park, OH, ASM.
45. 10.1179/mst.1991.7.8.68610.1179/mst.1991.7.8.686 ↗
46. Shipway P. H., and Bhadeshia H. K. D. H. ‘The effect of small stresses on the kinetics of the bainite transformation’, Mater. Sci. Eng. A, 1995, A201,143–149.10.1016/0921-5093(95)09769-4 ↗
47. 10.1016/0956-7151(94)90125-210.1016/0956-7151(94)90125-2 ↗
48. 10.1007/s11661-005-0003-910.1007/s11661-005-0003-9 ↗
49. 10.1016/j.scriptamat.2006.07.02110.1016/j.scriptamat.2006.07.021 ↗
50. 10.2355/isijinternational.42.105910.2355/isijinternational.42.1059 ↗
51. Jones W. K. C., and Alberry P. J.: in Terrific steels for fast reactor steam generators’, 1-4; 1977, London, British Nuclear Engineering Society.
52. Jones W. K. C., and Alberry P. J.: in ‘Residual stresses in welded constructions’, 1977, Cambridge, The Welding Institute.
53. Nitschke-Pagel T., and Wohlfahrt H. ‘Residual stresses in welded joints — sources and consequences’, Mater. Sci. Forum, 2002, 404-407,215–224.10.4028/www.scientific.net/MSF.404-407.215 ↗
54. 10.1080/1023816041000173450410.1080/10238160410001734504 ↗
55. 10.1016/S0142-1123(99)00062-610.1016/S0142-1123(99)00062-6 ↗
56. Ohta A., Matsuoka K., Nguyen N. T., Maeda Y., and Suzuki N. ‘Fatigue strength improvement of lap joints of thin steel plate using low-transformation-temperature welding wire’, Weld. I, 2003,82, (4), 78S-83S.
57. Wang W. X. · J. Mater. Sci. Technol · 2002 · 18 · 527
58. 10.1016/j.ijpvp.2006.02.01510.1016/j.ijpvp.2006.02.015 ↗
59. 10.1243/030932498151291310.1243/0309324981512913 ↗
60. 10.1016/j.ijmecsci.2005.11.00210.1016/j.ijmecsci.2005.11.002 ↗
61. Dennis R. J., and Leggatt N. A. ‘Optimisation of weld modelling techniques, bead-on-plate analysis’, Proc. ASME PVP2006, Vancouver, Canada, July 2006, ASME.10.1115/PVP2006-ICPVT-11-93907 ↗
62. 10.1007/BF0266733310.1007/BF02667333 ↗
63. Hong J. K., Tsai C. L., and Dong P. ‘Assessment of numerical procedures for residual stress analysis of multipass welds’, Weld J, 1998,77, (9), 372S-382S.
64. Dong P., and Hong K. ‘Recommendations for determining residual stresses in fitness for service assessments’, WRC Bulletin 476, New York, November 2002.
65. 10.1088/0965-0393/3/2/00910.1088/0965-0393/3/2/009 ↗
66. 10.1103/RevModPhys.67.8510.1103/RevModPhys.67.85 ↗
67. Mishra S., and Debroy T. ‘A genetic algorithm and gradient-descent-based neural network with the predictive power of a heat and fluid flow model for welding’, Weld. 1, 2006,85, (11), 231s-242s.
68. 10.1063/1.158700610.1063/1.1587006 ↗
69. 10.1179/stw.2001.6.6.34110.1179/stw.2001.6.6.341 ↗
70. 10.1016/0001-6160(88)90185-X10.1016/0001-6160(88)90185-X ↗
71. 10.1016/0001-6160(88)90186-110.1016/0001-6160(88)90186-1 ↗
72. 10.1080/01495730130000638010.1080/014957301300006380 ↗
73. 10.1007/s11661-002-0307-y10.1007/s11661-002-0307-y ↗
74. 10.1007/s11661-002-0308-x10.1007/s11661-002-0308-x ↗
75. 10.1016/j.commatsci.2005.06.01010.1016/j.commatsci.2005.06.010 ↗