journal article·1991-08

Stress induced transformation to bainite in Fe–Cr–Mo–C pressure vessel steel

H. K. D. H. Bhadeshia, S. A. David, J. M. Vitek, R. W. Reed

Publisher page

Abstract

The kinetics of the bainitic transformation in a polycrystalline Fe–Cr–Mo–C alloy designed for applications in energy generation systems has been studied, with particular attention to the influence of mild tensile stresses on transformation behaviour. The steel was found to exhibit the incomplete reaction phenomenon, in which transformation to bainite stops well before the residual austenite acquires its paraequilibrium carbon concentration. It was found that even in the absence of an applied stress, the growth of bainitic ferrite caused anisotropic changes in specimen dimensions, consistent with the existence of crystallographic texture in its austenitic condition and, significantly, with the nature of the invariant-plane strain shape change that accompanies the growth of bainitic ferrite. Thus, transformation induced plasticity could be detected in fine grained polycrystalline samples, even in the absence of applied stress. The application of an external stress was found to alter radically the transformation behaviour, with clear evidence that the stress tends to favour the development of certain crystallographic variants of bainite, even though the stress may be well below the single phase yield strength. It is concluded that the transformation is influenced significantly by stresses as low as 45 MN m−2, even though the effect may not be obvious in metallographic studies. The results are analysed and discussed in terms of the mechanism of the bainite transformation.MST/1394
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. I. KOZASU, H. SUZUKI, M. YAMADA, and H. TAGAWA: in ‘Research on chrome—moly steels’, MPC-21, 53-76; 1984, New York, American Society of Mechanical Engineers.
2. 10.1007/BF0266126810.1007/BF02661268 ↗
3. 10.1007/BF0264719710.1007/BF02647197 ↗
4. KING J. F. · Weld. J., · 1986 · 39 · 7
5. 10.1007/BF0264725010.1007/BF02647250 ↗
6. SPENCER P. N. · High. Temp. Technol., · 1989 · 7 · 1710.1080/02619180.1989.11753408 ↗
7. 10.1007/BF0265656110.1007/BF02656561 ↗
8. DUCKWORTH W. E. · J. Met., · 1966 · 18 · 915
9. 10.1007/BF0265659110.1007/BF02656591 ↗
10. 10.1016/0001-6160(59)90031-810.1016/0001-6160(59)90031-8 ↗
11. LANGE H. · Mitt. KWI Eisenforchung · 1938 · 20 · 125
12. JELL1NGHAUS W. · Arch. Eisenhiittenwes., · 1952 · 23 · 459
13. HOWARD R. T. · Trans. AIME · 1948 · 176 · 384
14. RADCLIFFE S. V. · J. Iron Steel Inst., · 1959 · 191 · 56
15. GOODENOW R. H. · Trans. AIME · 1965 · 233 · 1777
16. KO T. · J. Iron Steel Inst., · 1953 · 172 · 16
17. HAWKINS M. J. · J. Iron Steel Inst., · 1972 · 210 · 97
18. 10.1016/0001-6160(53)90083-210.1016/0001-6160(53)90083-2 ↗
19. C. M. VLAD: ‘Accelerated cooling of steel’, (ed. P. D. Southwick), 435; 1985, Warrendale, PA, The Metallurgical Society of AIME.
20. DALLUM C. B. · Am. Weld. J. · 1989 · 198s
21. 10.1007/BF0059147310.1007/BF00591473 ↗
22. 10.1179/03063458179042671410.1179/030634581790426714 ↗
23. 10.1179/03063458179042669710.1179/030634581790426697 ↗
24. 10.1016/S0036-9748(88)80294-110.1016/S0036-9748(88)80294-1 ↗
25. W. C. LESLIE: ‘The physical metallurgy of steels’, 1982, New York/Tokyo, McGraw-Hill.
26. WEVER F. · Z. Metallkd., · 1928 · 20 · 363
27. W. HUME-ROTHERY: ‘The structures of alloys of iron’; 1966, Oxford, Pergamon Press.10.1016/B978-0-08-011249-7.50013-8 ↗
28. DYSON D. J. · J. Iron Steel Inst., · 1970 · 277 · 469
29. L. J. HABRAKEN and M. ECONOMOPOLUS: ‘Transformations and hardenability in steels’, 69-108; 1967, Climax Molybdenum. Ann Arbor.
30. B. JOSEFFSON and H.O. ANDREN: ‘Recent trends in welding science and technology’, (ed. S. A. David and J. M. Vitek), 243-248; 1989, Materials Park, OH, ASM International.
31. HABRAKEN L. · Rev. Met., · 1956 · 53 · 93010.1051/metal/195653120930 ↗
32. HABRAKEN L. · Compt. Rend., · 1957 · 19 · 126
33. L. HABRAKEN: ‘Physical properties of martensite and bainite’, 147; 1965, London, The Iron and Steel Institute.
34. K. A. RIDAL and J. McCANN: ‘Physical properties of martensite and bainite’; 1965, London, The Iron and Steel Institute.
35. LEONT'YEV B. A. · Fiz. Metall. Metalloved., · 1974 · 38 · 1050
36. J. W. CHRISTIAN and D. V. EDMONDS: ‘Phase transformations in ferrous alloys’, (ed. A. R. Marder and J. I. Goldstein), 293-326; 1984, Warrendale, PA, The Metallurgical Society of AIME.
37. 10.1016/0001-6160(80)90082-610.1016/0001-6160(80)90082-6 ↗
38. 10.1016/0001-6160(81)90063-810.1016/0001-6160(81)90063-8 ↗
39. 10.1179/03063458279042721710.1179/030634582790427217 ↗
40. M. STRANGWOOD and H. K. D. H. BHADESHIA: ‘Welding metallurgy of structural steels’, (ed. J. Y. Koo), 495-504; 1987, Warrendale, PA, The Metallurgical Society of AIME.