journal article·2016-07

An updated review: White etching cracks (WECs) and axial cracks in wind turbine gearbox bearings

M.-H. Evans

Materials Science and Technology· Volume 32· Issue 11
Publisher page

Abstract

The actual service life of wind turbine gearboxes is often well below the desired 20 years. One of the prevalent failure modes in gearbox bearing raceways is white structure flaking (WSF) in as little as 6–24 months of operation by the formation of axial cracks and white etching cracks (WECs) with associated microstructural change called white etching areas (WEAs). Despite these failures having been observed for two decades in various industries, the drivers and mechanisms for their formation are still highly contested. Discussed in this review are methods for searching and analysing WECs, mechanisms for WEA microstructural change, WEC initiation and propagation theories, WSF formation drivers and finally technologies and processes offering resistance to WSF. This updated review serves as a recap, comprehensive update on findings, current focus areas and remaining challenges. This paper is part of a Themed Issue on Recent developments in bearing steels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Gear and Bearing Dynamics Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

MHEconsulting, 7 Boreham Road, Bournemouth, BH6 5BW, UK

National Centre for Advanced Tribology (nCATS), University of Southampton, SO17 1BJ, UK

References (100+)

Show source-provided references
1. Evans M.-H.: ‘White structure flaking (WSF) in wind turbine gearbox bearings: effects of ‘butterflies’ and white etching cracks (WEC)’, J. Mater. Sci. Technol., 2012, 28, (1), 3–22.
2. Evans M.-H.: ‘White structure flaking failure in bearings under rolling contact fatigue’ PhD thesis University of Southampton 2013.
3. Evans M.-H., , Richardson A. D., , Wang L., and Wood R. J. K.: ‘Serial sectioning investigation of butterfly and white etching crack (WEC) formation in wind turbine gearbox bearings’, Wear, 2013, 302, 1573–1582.
4. Evans M.-H., , Richardson A. D., , Wang L., and Wood R. J. K.: ‘Effect of hydrogen on butterfly and white etching crack (WEC) formation under rolling contact fatigue (RCF)’, Wear, 2013, 306, (1–2), 226–241.
5. 10.1016/j.triboint.2014.03.01210.1016/j.triboint.2014.03.012 ↗
6. 10.1016/j.msea.2013.02.00410.1016/j.msea.2013.02.004 ↗
7. 10.1016/j.triboint.2013.03.02210.1016/j.triboint.2013.03.022 ↗
8. 10.1177/135065011452536310.1177/1350650114525363 ↗
9. Richardson A. D. Wang L. Wood R. J. K. Evans M.-H. Anderson W. B. and Ingram M.: ‘Investigation of the role of hydrogen in white structure flaking (WSF) of wind turbine gearbox bearings’ STLE annual meeting Dalas TX 2015 STLE.
10. 10.5772/2079010.5772/20790 ↗
11. Gegner J. and Nierlich W.: ‘Frictional surface crack initiation and corrosion fatigue driven crack growth’ Wind turbine tribology seminar renaissance boulder flatiron hotel Broomfield CO USA November 15–17 2011.
12. Holweger W.: ‘Influence on bearing life by new material phenomena’ NREL wind turbine tribology seminar renaissance boulder flatiron hotel broomfield CO USA November 15–17 National Renewable Energy Laboratory (NREL) 2011.
13. Luyckx J.: ‘Hammering wear impact fatigue hypothesis WEC/irWEA failure mode on roller bearings’ Wind turbine tribology seminar Renaissance Boulder Flatiron Hotel Broomfield CO USA November 15–17 2011.
14. 10.2474/trol.6.29110.2474/trol.6.291 ↗
15. Uyama H.: ‘The mechanism of white structure flaking in rolling bearings’ NREL wind turbine tribology seminar Renaissance Boulder Flatiron Hotel Broomfield CO USA November 15–17 National Renewable Energy Laboratory (NREL) 2011.
16. 10.1179/0267083612Z.00000000020310.1179/0267083612Z.000000000203 ↗
17. Hyde R. S.: ‘Improving gearbox reliability by analyzing axial cracking on bearings and recommending a solution’ 2012 1–4. Timken. Available from: http://www.timken.com/fr-fr/solutions/windenergy/Documents/Timken-Radial-Cracking-Tech-Paper.pdf accessed 7 January 2016.
18. Kirchheim R. and Kirchheim A.: Hydrogen sensor: non-destructive measurement of diffusible hydrogen in metals in http://www.kirctec.com KircTec Editor 2012.
19. 10.1177/135065011143558010.1177/1350650111435580 ↗
20. Luyckx J.: ‘White etching crack failure mode in roller bearings: from observation via analysis to understanding and an industrial solution’ Rolling element bearings Anaheim CA US 2012 ASTM International 1–25.10.1520/STP103908T ↗
21. 10.1016/j.scriptamat.2012.11.01810.1016/j.scriptamat.2012.11.018 ↗
22. 10.1080/10402004.2013.82353110.1080/10402004.2013.823531 ↗
23. 10.1016/j.wear.2013.01.06010.1016/j.wear.2013.01.060 ↗
24. Kang J.-H.: ‘Mechanisms of microstructural damage during rolling contact fatigue of bearing steels’ PhD thesis University of Cambridge 2013.
25. 10.1016/j.scriptamat.2013.07.01710.1016/j.scriptamat.2013.07.017 ↗
26. 10.1016/j.commatsci.2012.09.02210.1016/j.commatsci.2012.09.022 ↗
27. Mauntz M. R., , Gegner J., , Kuipers U., and Klingau S.: ‘A sensor system for online oil condition monitoring of operating components’ in ‘Tribology-fundamentals and advancements’, (ed. Gegner J.), 305–321; 2013, Rijeka, InTech.
28. Stadler K. and Stubenrauch A.: Premature bearing failures in wind gearboxes and white etching cracks (WEC) in evolution. 2013 SKF.
29. 10.1016/j.matdes.2012.07.03010.1016/j.matdes.2012.07.030 ↗
30. 10.3139/147.11024610.3139/147.110246 ↗
31. 10.1016/j.wear.2013.03.04210.1016/j.wear.2013.03.042 ↗
32. Ag S.: ‘Innovative technologies for preventing white etching cracks’ 2014 Schaeffler AG 000-004-881 DE-EN. Available from: http://www.schaeffler.com/content.schaeffler.sg/en/press/press-releases/press-details.jsp?id=54292034 accessed 7 January 2016.
33. Barteldes S. Walther F. and Holweger W.: ‘Residual stress evolution and acoustic emission during lubrication-assisted White Etching Crack (WEC) Formation’ 2014 STLE Annual Meeting Disney's Contemporary Resort Lake Buena Vista FL USA 2014.
34. Franke J. Holweger W. Surborg H. Blass T. Fahl J. Elfrath T. Abe T. and Merk D.: ‘Influence of tribolayer on rolling bearing fatigue performed on a FE8 test rig’ TAE 19th international colloquium tribology Ostfildern Germany 2014 1–13.
35. 10.1007/s11665-014-1188-010.1007/s11665-014-1188-0 ↗
36. Grujicic M., , Ramaswami S., , Yavari R., , Galgalikar R., , Chenna V., and Snipes J. S.: ‘Multiphysics computational analysis of white-etch cracking failure mode in wind turbine gearbox bearings’, Proc. Inst. Mech. Eng. L: J. Mater. Des. Appl., 2014, 1–21.
37. Holweger W.: ‘Progresses in solving white etching crack phenoma’ Gearbox reliability collaborative all members meeting NREL Golden Colorado February 10–12 2014 2014.
38. 10.1080/10402004.2014.94293810.1080/10402004.2014.942938 ↗
39. Hyde R. S.: ‘White etching areas: importance of microstructural characterization and modeling’ Gearbox reliability collaborative all members meeting NREL Golden CO February 10–12 2014 2014.
40. Moghaddam S. M., , Sadeghi F., , Weinzapfel N., and Liebel A.: ‘A damage mechanics approach to simulate butterfly wing formation around nonmetallic inclusions’, J. Tribol., 2014, 137, (1), 1–13.
41. 10.1177/135065011452245210.1177/1350650114522452 ↗
42. 10.1007/s11661-014-2431-x10.1007/s11661-014-2431-x ↗
43. Stadler K.: ‘Premature wind gearbox bearing failures and white etching cracks (WEC)’ Gearbox reliability collaborative all members meeting NREL Golden CO February 10–12 2014 2014.
44. Stadler K., , Lai J., and Vegter R. H.: ‘A review: the dilemma with premature white etching crack (WEC) bearing failures’, J. ASTM Int., 2014, STP 1580, 487–508.
45. Uyama H. and Yamada H.: White structure flaking in rolling bearings for wind turbine gearboxes. Wind Systems Magazine 2014. p. 14–25.
46. Gegner J. and Nierlich W.: ‘Service loading analysis of wind turbine gearbox rolling bearings based on X-ray diffraction residual stress measurements’ Mater. Sci. Forum 2014 768–769 723–732. doi: 10.4028/www.scientific.net/MSF.768-769.72310.4028/www.scientific.net/MSF.768-769.723 ↗
47. Konrad A. Nierlich W. and Gegner J.: ‘Finite element analysis of the rolling-sliding contact of vibrationally loaded bearings based on a micro friction model’ Mater. Sci. Forum 2014 768–769 714–722. doi: 10.4028/www.scientific.net/MSF.768-769.71410.4028/www.scientific.net/MSF.768-769.714 ↗
48. 4LinesFusion: 4LinesFusion's SeerWorks Tribology Engine: 4LF-WEC Radar. 2015 London 4LinesFusion p. 1–3. Available from: www.4linesfusion.com accessed 7 January 2016.
49. 4LinesFusion: The 4LinesFusion White Etching Crack (WEC) Coefficient - k4LF. 2015 London 4LinesFusion p. 1–3. Available from: www.4linesfusion.com accessed 7 January 2016.
50. Ag S.: ‘Innovative solutions for preventing white etching cracks’ 2015 Schaeffler AG 000-005-723 DE-EN. Available from: http://www.fag.de/content.fag.de/en/press/press-releases/press-details.jsp?id=68391616 accessed 7 January 2016.
51. 10.1179/1743284715Y.000000003610.1179/1743284715Y.0000000036 ↗
52. 10.1049/iet-rpg.2014.019410.1049/iet-rpg.2014.0194 ↗
53. 10.1016/j.wear.2015.06.00810.1016/j.wear.2015.06.008 ↗
54. Diederichs A. M. Schwedt A. Mayer J. and Dreifert T.: ‘Electron microscopy analysis of structural changes within white etching areas’ J. Mater. Sci. Technol. 2015 In Press. DOI: 10.1080/02670836.2016.1139030.10.1080/02670836.2016.1139030 ↗
55. Diederichs A. M. Schwedt A. Park D. Herbig M. and Mayer J.: ‘Observation of deformation induced redistribution of chromium and carbon in bearing steel’ Microscopy conference 2015 Georg-August-University Gottingen Germany 2015.
56. GmbH V. U.: Standstills caused by WEC (white etching cracks) reduced by ultrasonic inspection 2015.
57. 10.1007/s11249-015-0602-610.1007/s11249-015-0602-6 ↗
58. Gould B. Greco A. C. and Preilser R.: ‘High energy X-ray tomography of failed wind turbine bearings’ STLE annual meeting Dalas TX May 20 2015 2015.
59. 10.1016/j.ijfatigue.2015.03.01110.1016/j.ijfatigue.2015.03.011 ↗
60. 10.1016/j.ijfatigue.2015.05.01010.1016/j.ijfatigue.2015.05.010 ↗
61. NREL: ‘Statistics show bearing problems cause the majority of wind turbine gearbox failures’ 2015. U.S. Department of Energy & National Renewable Energy Laboratory (NREL). Available from: http://energy.gov/eere/wind/articles/statistics-show-bearing-problems-cause-majority-wind-turbine-gearbox-failures accessed 7 January 2016.
62. Ruellan A.: ‘Tribological analysis of white etching crack (WEC) failures in rolling element bearings’ PhD thesis INSA de Lyon 2015.
63. 10.1007/s11249-015-0564-810.1007/s11249-015-0564-8 ↗
64. Stadler K. Han B. Brizmer V. and Pasaribu R.: Benefits of using black oxidized bearings in wind applications in SKF Evolution. 2015 SKF.
65. Yamada H. and Uyama H.: ‘The effects of alloy elements and heat treatments on white structure flaking in rolling bearings’ STLE annual general meeting Dallas TX May 17–21 2015 2015.
66. Greco A. C.: ‘Failure modes and testing methods: advances in white-etch crack research’ STLE tribology frontiers conference Denver CO October 25–27 2015 2015 STLE.10.1016/S1350-4789(15)30269-5 ↗
67. 10.1179/03071698180327541510.1179/030716981803275415 ↗
68. 10.1016/j.ijfatigue.2009.07.00210.1016/j.ijfatigue.2009.07.002 ↗
69. Österlund R., , Vingsbo O., , Vincent L., and Guiraldenq P.: ‘Butterflies in fatigued ball bearings - formation mechanism and structure’, Scand. J. Metall., 1982, 11, 23–32.
70. McVittie D.: ‘Wind turbine gearbox reliability’ 2006. Available from: http://windpower.sandia.gov/2006reliability/tuesday/14-brianmcniff.pdf accessed 7 January 2016.
71. Musial W. Butterfield S. and McNiff B.: ‘Improving wind tubine gearbox reliability’ EWEA 2007 Milan Italy 7–10 May 2007 U.S. Department of Commerce 1–10.
72. Rosinski J., and Smurthwaite D.: ‘Troubleshooting wind gearbox problems’, in Gear Solutions’, (ed. Rogers M., and Conrad A. C.), 22–33; 2010, Pelham, AL, Media Solutions, Inc.
73. Heege A. Radovcic Y. and Betran J.: Fatigue load computation of wind turbine gearboxes by coupled structural mechanism and aerodynamic analysis. DEWI Magazine 2006. p. 61–68.
74. 10.1002/047084606210.1002/0470846062 ↗
75. Vries E.: ‘Wind turbine gearboxes and the effort to improve their reliability’ Windpower Monthly 2010 [viewed: 16 June]
76. Rasmussen F., , Thomsen K., and Larsen T. J.: ‘The gearbox problem revisited’; 2004, Roskilde, DK, Risø National Laboratory.
77. 10.1016/j.pmatsci.2011.06.00210.1016/j.pmatsci.2011.06.002 ↗
78. Scott D., , Loy B., and Mills G. H.: ‘Metallurgical aspects of rolling contact fatigue’, Proc. Inst. Mech. Eng., 1966, 181, (315), 94–103.
79. 10.1520/STP12371S10.1520/STP12371S ↗
80. 10.1520/STP12370S10.1520/STP12370S ↗
81. Walton H. W.: ‘The influence of residual stresses on the susceptibility to hydrogen embrittlement in hardened steel components subjected to rolling contact conditions’ SAE international off-highway congress Las Vegas NV March 19–21 2002 SAE International 1–6.10.4271/2002-01-1412 ↗
82. 10.1115/1.320913210.1115/1.3209132 ↗
83. 10.1243/135065005X980810.1243/135065005X9808 ↗
84. 10.1115/1.151088110.1115/1.1510881 ↗
85. 10.1179/03071698080328667610.1179/030716980803286676 ↗
86. 10.1520/STP36149S10.1520/STP36149S ↗
87. 10.1115/1.326107810.1115/1.3261078 ↗
88. 10.1520/STP12126S10.1520/STP12126S ↗
89. 10.1179/mst.1997.13.5.43010.1179/mst.1997.13.5.430 ↗
90. 10.1098/rsta.2010.019410.1098/rsta.2010.0194 ↗
91. 10.1098/rsta.2010.019210.1098/rsta.2010.0192 ↗
92. Evans M.-H., , Richardson A. D., , Wang L., , Wood R. J. K., , and Anderson W. B.: ‘Confirming subsurface initiation at non-metallic inclusions as one mechanism for white etching crack (WEC) formation’, Wear, 2014, 75, 87–97, Reprinted from Wear with permission from Elsevier. Copyright (2014).
93. Ščepanskis M., , Jakovičs A., , Kaldre I., , Holweger W., , Nacke B., , Diederichs A.: ‘The numerical model of electrothermal deformations of carbides in bearing steel as the possible cause of white etching cracks initiation’, Tribol. Lett., 59, 2015, 1–10. Fig. 1.
94. 10.1007/s11661-014-2431-x10.1007/s11661-014-2431-x ↗
95. 10.1016/j.msea.2009.02.00810.1016/j.msea.2009.02.008 ↗
96. Holweger W.: Personal communication 2015.
97. Gegner J., and Nierlich W.: ‘Operational residual stress formation in vibration-loaded rolling contact’, Adv. X-ray Anal., 2008, 52, 722–731.
98. 10.1016/j.scriptamat.2007.06.02410.1016/j.scriptamat.2007.06.024 ↗
99. 10.2355/isijinternational.45.189710.2355/isijinternational.45.1897 ↗
100. 10.1016/0956-716X(95)00108-810.1016/0956-716X(95)00108-8 ↗