Inertia effects in uniaxial dynamic compression of a closed cell aluminium alloy foam
Source abstract
Abstract
The dynamic compressive characteristics of a closed cell aluminium alloy foam (manufactured by Hydro Aluminium AS, Norway) have been studied experimentally by using a direct impact technique for a range of velocities up to 210 m s–1. Experimental data on the dynamic initial crushing and plateau stresses are compared for two average cell sizes of approximately 4 and 14 mm. The data reveal significant dynamic enhancements of the initial crushing strengths throughout the range of velocities used. The dynamic plateau stresses are insensitive to impact velocity below the values of 50 and 100 m s–1 for the large and small cell foams respectively. Beyond a critical velocity value of ~ 100 m s–1, the crushing wave front propagates through the foam with shock like characteristics. The inertia effects associated with the dynamic localisation of crushing and the microinertia of the cell wall/edge material on the dynamic strength enhancement are discussed. A one-dimensional shock model based on a rate independent, rigid, perfectly plastic locking idealisation of the nominal stress–strain curve for foams is employed to provide a first order understanding of the various parameters involved in the crushing process. The results of the analyses are seen to predict well the dynamic strength enhancements that are measured experimentally. The sources of discrepancies are highlighted and discussed, as are the limitations and shortcomings of the shock model.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Automotive and Human Injury Biomechanics · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. S. R. REID, T. Y. REDDY, and C. PENG: in ‘Structural crash-worthiness and failure’ (ed. N. Jones and T. Wierzbicki), 295; 1993, London, Elsevier.
2. 10.1016/S0734-743X(99)00153-010.1016/S0734-743X(99)00153-0 ↗
3. 10.1016/S0734-743X(97)00016-X10.1016/S0734-743X(97)00016-X ↗
4. P. ASHOLT: in ‘Metal foams and porous metal structures’, (ed. J. Banharti et al. ), 133; 1999, Bremen, Verlag MIT.
5. HANSSEN A. G. · Private communication · 2000
6. H. N. G. WADLEY: in ‘Cellular metals and metal foaming technology’, (ed. J. Banhart et al. ), 137; 2001, Bremen, Verlag MIT Publishing.10.1016/S0079-6425(00)00002-5 ↗
7. A.M. HARTE and S. NICHOL: in ‘Cellular metals and metal foaming technology’, (ed. J. Banhart et al. ), 49; 2001, Bremen, Verlag MIT.10.1016/S0079-6425(00)00002-5 ↗
8. 10.1115/1.142019410.1115/1.1420194 ↗
9. 10.1016/S0022-5096(99)00035-610.1016/S0022-5096(99)00035-6 ↗
10. 10.1016/S0167-6636(96)00043-910.1016/S0167-6636(96)00043-9 ↗
11. 10.1016/0956-7151(95)00001-C10.1016/0956-7151(95)00001-C ↗
12. 10.1016/S0734-743X(99)00169-410.1016/S0734-743X(99)00169-4 ↗
13. 10.1016/S0020-7403(00)00043-610.1016/S0020-7403(00)00043-6 ↗
14. 10.1016/0734-743X(94)00061-Z10.1016/0734-743X(94)00061-Z ↗
15. 10.1016/0734-743X(94)00062-210.1016/0734-743X(94)00062-2 ↗
16. M. J. LIGHTHILL: in ‘Surveys in mechanics’, (ed. G. K. Batchelor and R. M. Davies), 250; 1956, Cambridge, Cambridge University Press.