journal article·2004-11

Understanding mechanisms of grain refinement of aluminium alloys by inoculation

T. E. Quested

Materials Science and Technology· Volume 20· Issue 11
Publisher page

Abstract

For over half a century, grain refinement of aluminium alloys has been achieved by chemical inoculation; current grain-refinement practice involves the addition of master alloys (e.g. Al – Ti – B, Al – Ti – C) before casting, introducing inoculant particles to the melt. These particles act as nucleation points for α-Al grains, resulting in a uniformly fine, equiaxed as cast microstructure. Despite the ubiquity of this process, its underpinning science was not fully understood, hindering development of the area. From the 1950s onwards, the phase responsible for nucleation in alloys refined by Al – Ti – B was fiercely disputed. The debate focused so closely on this issue that other important factors were frequently ignored. During the 1990s, this debate was resolved through careful thermodynamic reasoning and novel experiments that derived their inspiration far from the foundry. This review focuses on subsequent experimental work and modelling: the expansion of the current understanding of grain refinement to include effects relating to the release of latent heat, the size distribution of inoculant particles and the alloying elements present in the melt (through poisoning and growth-restriction effects). The current contention regarding the nature of the interface between the nucleant phase (TiB2) and the melt is also discussed. These recent advancements have lead to improvements in grain refining practice resulting in savings in the foundry and development of alternative master alloys for aluminium systems. The ideas have also been successfully applied to other metallic systems, notably magnesium and zinc alloys.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. 10.1179/imr.1989.34.1.24710.1179/imr.1989.34.1.247 ↗
2. 10.1179/09506600122500104910.1179/095066001225001049 ↗
3. 10.1016/S1359-6454(02)00259-810.1016/S1359-6454(02)00259-8 ↗
4. 10.1179/13621719910153803010.1179/136217199101538030 ↗
5. 10.1179/mst.1997.13.9.76910.1179/mst.1997.13.9.769 ↗
6. MARCANTONIO J. A. · J. Inst. Metals · 1970 · 98 · 23
7. 10.1179/mst.1993.9.2.9710.1179/mst.1993.9.2.97 ↗
8. 10.1007/s11661-999-0098-510.1007/s11661-999-0098-5 ↗
9. 10.1007/BF0265733510.1007/BF02657335 ↗
10. BUNN A. M. · 1998 · University of C
11. MORICEAU J. · Rev. Aluminium · 1972 · 12 · 977
12. JOHNSSON M. · Z. Metallkd · 1996 · 87 · 216
13. 10.1063/1.170260710.1063/1.1702607 ↗
14. 10.1063/1.165847410.1063/1.1658474 ↗
15. 10.1103/PhysRevA.33.43510.1103/PhysRevA.33.435 ↗
16. 10.1016/0025-5416(84)90201-510.1016/0025-5416(84)90201-5 ↗
17. KEARNS M. A. · Mater. Sct Technol · 1997 · 13 · 650— 654
18. CIBULA A. · J. Inst. Metals · 1949 · 76 · 321
19. 10.1007/BF0264511210.1007/BF02645112 ↗
20. TRONCHE A. · 2000 · University of C
21. 10.1179/03071698280328636810.1179/030716982803286368 ↗
22. CIBULA A. · J. Inst. Metals · 1951 · 80 · 1
23. JOHNSSON M. · Z. Metallkd · 1998 · 89 · 394
24. 10.1179/03063457579044478410.1179/030634575790444784 ↗
25. JOHNSSON M. · Z. Metallkd · 1992 · 83 · 774 — 780
26. 10.1179/03071698280328621410.1179/030716982803286214 ↗
27. 10.1007/BF0264947610.1007/BF02649476 ↗
28. 10.1179/mst.1998.14.7.60110.1179/mst.1998.14.7.601 ↗
29. 10.1179/mst.1998.14.12.120310.1179/mst.1998.14.12.1203 ↗
30. STOLZ U. K. · Aluminium · 1995 · 71 · 350— 355
31. HAYES F. H. · Z. Metallkd · 1989 · 80 · 361
32. 10.1007/BF0265492110.1007/BF02654921 ↗
33. 10.1179/mst.1995.11.6.53310.1179/mst.1995.11.6.533 ↗
34. 10.1179/mst.1997.13.9.76910.1179/mst.1997.13.9.769 ↗
35. JOHNSSON M. · Z. Metallkd · 1994 · 85 · 781
36. 10.1179/02670839910150515810.1179/026708399101505158 ↗
37. 10.1080/0950083011004164810.1080/09500830110041648 ↗
38. NAESS s. E. · Metallography · 1975 · 8 · 391 — 400
39. 10.1179/mst.1998.14.5.39410.1179/mst.1998.14.5.394 ↗
40. JOHNSSON M. · Z. Metallkd · 1998 · 89 · 478
41. BACKERUD L. · Aluminium · 1991 · 67 · 910
42. M. VADER, J. NOORDEGRAAF and P. C. VAN WIGGEN: in ‘Light metals 1991’, (ed. E. L. Rooy); 1991, Warrendale, PA, TMS.
43. G. P. JONES: in ‘Solidification processing 1987’, (ed. J. Beech and H. Jones), 496; 1987, University of Sheffield, The Institute of Metals.
44. MCKAY B. J. · 2001 · University of O
45. 10.1126/science.106852110.1126/science.1068521 ↗
46. 10.1016/0921-5093(94)90858-310.1016/0921-5093(94)90858-3 ↗
47. 10.1016/0921-5093(94)90559-210.1016/0921-5093(94)90559-2 ↗
48. KLANG H. · PhD thesis · 1981 · University of S
49. 10.1007/BF0264898310.1007/BF02648983 ↗
50. 10.1179/mst.1998.14.11.109210.1179/mst.1998.14.11.1092 ↗
51. 10.1016/S0921-5093(97)80081-010.1016/S0921-5093(97)80081-0 ↗
52. 10.1007/BF0265228210.1007/BF02652282 ↗
53. 10.1007/s11661-999-0099-410.1007/s11661-999-0099-4 ↗
54. 10.1007/BF0264277110.1007/BF02642771 ↗
55. 10.2355/isijinternational.35.69310.2355/isijinternational.35.693 ↗
56. 10.1007/BF0264277010.1007/BF02642770 ↗
57. 10.1007/BF0116057410.1007/BF01160574 ↗
58. HOEFS P. · Giesserei · 1994 · 81 · 398
59. 10.1179/mst.1995.11.11.109910.1179/mst.1995.11.11.1099 ↗
60. 10.1007/BF0264909310.1007/BF02649093 ↗
61. J. E. C. HUTT, A. K. DAHLE, Y. C. LEE and D. H. STJOHN: in ‘Light metals 1999’, 685–692; 1999, Warrendale, PA, TMS.
62. 10.1016/S0022-3093(02)01992-010.1016/S0022-3093(02)01992-0 ↗
63. KRAJEWSKI W. · Arch. Metall · 1999 · 44 · 51
64. 10.1007/BF0266241010.1007/BF02662410 ↗
65. 10.1179/02670830010150704610.1179/026708300101507046 ↗
66. 10.1179/02670830222500603410.1179/026708302225006034 ↗