Entrainment Defects
Source abstract
Abstract
Most metals start their lives in the liquid state, and are subjected to various transfers involving pouring or other types of surface turbulence. These actions entrain (fold in) the surface film to create entrainment defects. These are principally (a) bubbles that in turn create bubble trails; (b) bifilms; doubled over surface films, that act as cracklike defects; and (c) sundry entrained debris, collectively known as exogenous inclusions. The bifilm is the subject of this perspective. It appears to be a common, but serious and almost overlooked metallurgical defect. Analysis of bifilms provides a simple, powerful and elegant concept based on an enduring legacy from turbulence during the pouring of liquid metals. Usually large populations of bifilms are introduced into metals at an early stage of their production. In general their presence has been unsuspected because although they can have large area, they can often be only nanometres thick and not easily detected by conventional non-destructive techniques. The populations of cracks in suspension in liquid metal explains many otherwise inexplicable features of cast products such as porosity, hot tearing, the morphologies of second phases, and impaired reliability of mechanical properties. The fundamental difference between such entrained defects (associated with a macroscopic unbonded interface) and defects and inclusions grown in the melt is seen to be of central significance for the failures of metals by mechanical or corrosion type mechanisms. For wrought products the continued presence of bifilms, now usually extended and elongated and mainly occupying grain boundaries, appears to offer explanations for many metallurgical phenomena. Bifilms are likely to influence the development of texture, and are the most likely source for many types of failure in the solid state. Thus the limitations to superplastic forming, cavitation in tertiary creep, pitting corrosion of various types and stress corrosion cracking are likely to be profoundly affected by bifilms. Although the effects of bifilms can be reduced by expensive post-casting operations such as hipping or working, the major future potential lies in techniques for their avoidance. Some casting operations are already taking some first steps in new technology for their avoidance, and benefiting technically and commercially.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Erosion and Abrasive Machining · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Campbell J. ‘Castings’ 2nd edn, 443-452; 2003, Oxford, Butterworth-Heinemann.
2. 10.1016/S1359-6462(00)00506-610.1016/S1359-6462(00)00506-6 ↗
3. 10.1080/13640461.2002.1181945110.1080/13640461.2002.11819451 ↗
4. 10.1179/13640460422502069610.1179/136404604225020696 ↗
5. Campbell J. ‘Casting practice’; 2004, Oxford, Butterworth Heinemann.
6. Campbell J. · Engineering · 1981 · 221 · 185
7. Walker J. L.: in ‘The physical chemistry of process metallurgy’ Part 2, (ed.StPierre G. R.), 845; 1959, New York, Interscience.
8. 10.1007/s11661-004-0372-510.1007/s11661-004-0372-5 ↗
9. Finardi J. · Trans. Am. Found Soc · 2000 · 108 · 409
10. Kiessling R.: Non-metallic inclusions in steel’, 42-86; 1978, London, The Metals Society.
11. Svoboda J. M. · Trans. Am. Found Soc · 1987 · 95 · 187
12. 10.1063/1.169801210.1063/1.1698012 ↗
13. Tynelius K. · Trans. Am. Found Soc · 1993 · 101 · 401
14. Anson J. P. · Trans. Am. Found. Soc · 1999 · 107 · 135
15. Brondyke K. J. · Trans. AIME · 1964 · 230 · 1542
16. Cox M., Wickins M., Kuang J. P., Harding R. A., and Campbell J.: Mater. Sci. Technot, 2000, 16,1445–1452. Results reported in Ref. 1.10.1179/026708300101507442 ↗
17. Karsay S. I. ‘Ductile iron production: the state of the art 1992’, 196–198; 1993, Canada, QIT Fer et Titane Inc.
18. 10.1007/s11661-003-0253-310.1007/s11661-003-0253-3 ↗
19. 10.1007/s11661-005-0106-310.1007/s11661-005-0106-3 ↗
20. 10.1007/s11661-004-0155-z10.1007/s11661-004-0155-z ↗
21. Campbell J.: in ‘Shape casting: The John Campbell Symposium’, (ed.Tiryakioglu M., and Creapeau P. N.), 3-12; 2005, Warrendale, PA, TMS.
22. 10.1080/13640461.2003.1181953510.1080/13640461.2003.11819535 ↗
23. 10.1080/13640461.2002.1181945910.1080/13640461.2002.11819459 ↗
24. Southin R. T., and Romeyn A.: in ‘Solidification technology in the foundry and cast house 1980’, 355–358; 1983, London, The Metals Society.
25. Banghikhan K.: PhD thesis, Department of Metallurgy and Materials, University of Birmingham, 2005.
26. 10.1007/s11661-004-0372-510.1007/s11661-004-0372-5 ↗
27. Green N. · Trans. Am. Found Soc · 1994 · 102 · 341
28. Nyahumwa C., Green N. R., and Campbell J.: Trans. Ant Found Soc., 1998, 106,215-223 and J. Mech Behav. Mater., 1998, 9,227–235.10.1515/JMBM.1998.9.4.227 ↗
29. Wang Q. G., Crepeau P. N., Gloria D., and Valtierra S.: in ‘Advances in aluminum casting technology’, (ed.Tiryakioglu M., and Campbell J.), 209-218; 2002, Materials Park, OH, ASM International.
30. Wang Q. G., Crepeau P. N., Griffiths J. R., and Davidson C. J. The John Campbell Symposium ‘Shape Casting’ (ed. Tiryakioglu M., and Crepeau P. N.), San Francisco, CA, USA, February 2005, TMS,205–214.
31. Kuhlmann—Wilsdorf D.: in ‘Lattice defects in quenched metals’; 1965, New York, Academic Press.
32. 10.1080/09534962.1995.1181919910.1080/09534962.1995.11819199 ↗
33. Cottrell A. H. · R. Soc. A · 1963 · 279 · 1
34. Knott J. F.: in ‘Recent advances in fracture’, (ed.Mahidhara R. K. et al), 1997; Warrendale, PA, TMS.
35. Ward D. K., Curtin W. A., and Qi Y.: http://www.engin.brown.edu/ facilities/GM CRL/Publications/Curtin%20A1-SMONanocomposites. pdf# search = ‘AlSi%20Debonding’
36. Sina H., Emamy M., Saremi M., Keyvani A., Mahta M., and Campbell J.: Corrosion Science, to be published.
37. Raiszadeh R., and Griffiths W. D.: in ‘Shape casting: The John Campbell Symposium’, (ed.Tiryakioglu M., and Creapeau P. N.), 13-22; 2005, Warrendale, PA, TMS.
38. Berry J. T., Luck R., and Taylor R. P.: in ‘Shape casting: The John Campbell Symposium’, (ed.Tiryakioglu M., and Creapeau P. N.), 113-122; 2005, Warrendale, PA, TMS.
39. Campbell J. · University of Birmingham · 2004
40. 10.1179/13640460422502267610.1179/136404604225022676 ↗
41. 10.1016/S0966-9795(02)00087-010.1016/S0966-9795(02)00087-0 ↗