Processes, microstructure and properties of vanadium microalloyed steels
Source abstract
Abstract
Vanadium as an important alloying element in steels was initially associated with the properties achieved following tempering. Interest in the microstructure was stimulated by the advent of transmission electron microscopes with a resolution of ∼1 nm together with selected area electron diffraction techniques. A second timely development was that of controlled rolling, particularly of plate and sheet products. The scope of this review will include the historical background on quenched and tempered vanadium steels, precipitation during isothermal aging, conventional controlled rolling and during thin slab direct charging and the development of strength and toughness in vanadium microalloyed steels. The characterisation of microstructure, in particular the methods for the analysis of the chemical composition of precipitates has progressed since the availability of X-ray energy dispersive analysis in the 1970s, and the role played by electron energy loss spectroscopy in providing quantitative analysis of carbon and nitrogen in vanadium microalloyed steels will be presented. There are still many topics involving vanadium microalloyed steels that are controversial. These include the nucleation sequence of homogeneous precipitates of vanadium carbonitride and whether this occurs coherently, the composition of the vanadium precipitates, the nucleation mechanism for interphase precipitation, the importance of strain induced precipitation in austenite of vanadium carbonitride, the contributions of both interphase precipitation and random precipitation in ferrite to the yield strength, and the role of the process route parameters in developing properties. These topics will be considered in this paper which concentrates on hot rolled vanadium microalloyed steels placed in the context of pertinent research on other alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Metallurgy and Engineering Materials GroupDepartment of Mechanical Engineering, University of Strathclyde, Glasgow, G1 1XN, UK
References (100+)
Show source-provided references
1. Woodhead J. H.: ‘The physical metallurgy of vanadium steels’ Proc. Semin. Vanadium'79 3-10; 1979 Vanitec Chicago IL; also available as Vanadium Award Paper no. V0284 London 1983.
2. Lagneborg R., , Siwecki T., , Zajac S., and Hutchinson B.: Scan. J. Metall., 1999, 28, 186–242.
3. Gladman T.: ‘The physical metallurgy of microalloyed steels’; 1997 London Institute of Materials.
4. Pickering F. B.: Proc. Conf. Microalloying ‘75 9-31; 1977 New York Union Carbide Corp.
5. Knowlton H. B.: ‘Heat treatment uses and properties of steel’ 105; 1929 Cleveland OH American Society for Steel Treating.
6. Abram H. H.: J. Iron Steel Inst., 1934, 130, 351–375.
7. Oakes G. and Barraclough K. C.: in ‘The development of gas turbine materials’ (ed. G.W. Meethem) 31-61; 1981 London Applied Science Publishers.10.1007/978-94-009-8111-9_2 ↗
8. Woodhead J. H., and Quarrell A. G.: J. Iron Steel Inst., 1965, 203, 605–620.
9. 10.1016/0025-5416(88)90516-210.1016/0025-5416(88)90516-2 ↗
10. in ‘Materials properties handbook: titanium alloys’ 483-636; 1994 Materials Park OH ASM International.
11. 10.1016/0022-5088(64)90014-110.1016/0022-5088(64)90014-1 ↗
12. 10.1016/0022-5088(64)90130-410.1016/0022-5088(64)90130-4 ↗
13. Davenport A. T., , Brossard L. C., and Milner R. E.: J. Met., 1975, 27, 21–27.
14. Baker R. G. and Nutting J.: in ‘Precipitation processes in steels’ Special report no. 64 1-22; 1959 London The Iron and Steel Institute.
15. 10.1007/BF0184347610.1007/BF01843476 ↗
16. 10.2355/isijinternational1966.15.14510.2355/isijinternational1966.15.145 ↗
17. Turkdogan E. T.: Trans. ISS Iron Steelmaker, May 1989, 61-7 5.
18. Wriedt H. A and Hu H.: in ‘Chemical metallurgy: a tribute to Carl Wagner (ed.Gokcen N. A. et al) 171-194; 1981 Warrendale PA The Metallurgical Society of AIME.
19. 10.1007/BF0265285410.1007/BF02652854 ↗
20. Savost'yanova N. A., and Shvartsman L. A.: Phys. Met. Metall., 1960, 9, 35–39.
21. Bungardt K., , Kind K., and Oelsen W.: Arch. Eisenhuttenw., 1956, 27, 6.
22. 10.2355/isijinternational1966.8.10110.2355/isijinternational1966.8.101 ↗
23. 10.1016/S0956-716X(99)80002-810.1016/S0956-716X(99)80002-8 ↗
24. Frohberg M. G., and Graf H.: Stahl Eisen, 1960, 80, 539–541.
25. Rose A.: British steel report no. SL/PM/R/52971/4/97/A 1979.
26. Roberts W. and Sandberg A.: ‘The compositions of C(V N) as precipitated in HSLA steel micoalloyed with vanadium’ Report no. IM-1489 Swedish Institute for Metals Stockholm Sweden 1980.
27. 10.1007/BF0286895910.1007/BF02868959 ↗
28. Aronsson B.: Proc. Symp. on ‘Steel strengthening mechanisms’ 77-88; 1969 Zurich Climax Molybdenum Company.
29. 10.1016/0001-6160(85)90129-410.1016/0001-6160(85)90129-4 ↗
30. Goldschmidt H. J.: ‘Interstitial alloys’ 238; 1957 London Butterworths.
31. 10.1016/0956-7151(93)90114-810.1016/0956-7151(93)90114-8 ↗
32. Popov V. V., and Gorbachev I. I.: Phys. Met. Metall., 2005, 99, 286–299.
33. 10.1080/1478643050007075010.1080/14786430500070750 ↗
34. 10.1007/BF0264287110.1007/BF02642871 ↗
35. Honeycombe R. W. K.: ‘Steels microstructure and properties’ 140-165; 1981 London Arnold.
36. Sage A. M. Woodhead J. H. and Evans D. W.: ‘Vanadium structural steels 2-quenched and tempered’; 1971 Witbank Highveld Steel and Vanadium Corporation.
37. Smith E., and Nutting J.: J. Iron Steel Inst., 1957, 157, 314–329.
38. Seal A. K., and Honeycombe R. W. K.: J. Iron Steel Inst., 1958, 158, 9–15.
39. Seal A. K., and Honeycombe R. W. K.: J. Iron Steel Inst., 1958, 158, 343–356.
40. Crafts W., and Lamont J. L.: Trans. AIME, 1950, 188, 561–574
41. Irvine K. J., and Pickering F. B.: J. Iron Steel Inst., 1960,194, 137–153.
42. Tekin E., and Kelly P. M.: J. Iron Steel Inst., 1965, 203, 715–720.
43. Tekin E. and Kelly P. M.: Proc. Conf. on ‘Precipitation from iron-based alloys’ 173-221; 1965 New York AIME Gordon and Breach.
44. Raynor D., , Whiteman J. A., and Honeycombe R. W. K.: J. Iron Steel Inst., 1966, 204, 349–354.
45. 10.2320/matertrans1960.9.10310.2320/matertrans1960.9.103 ↗
46. 10.1007/s11661-003-0303-x10.1007/s11661-003-0303-x ↗
47. 10.1179/02670830322500597110.1179/026708303225005971 ↗
48. 10.1179/02670830322500864410.1179/026708303225008644 ↗
49. 10.1179/mst.1993.9.11.103110.1179/mst.1993.9.11.1031 ↗
50. Orowan E.: Proc. Symp. on ‘Internal stresses in metals and alloys’ 451; 1948 London The Institute of Metals.
51. Hirsch P. B.: J. Inst. Metals 1957 86 7 appendix.
52. 10.1007/BF0267041610.1007/BF02670416 ↗
53. Edmonds D. V., and Honeycombe R. W. K.: Proc. Conf. on ‘Precipita-tion processes in solids’, (ed.Russell K. C., and Aaronson H. I.), 121-160; 1978, Warrendale, PA, Metallurgical Society of AIME.
54. Lui W. J. and Jonas J. J.: Proc. Conf. on ‘Processing micro-structure and properties of HSLA steels’ (ed. A. J. De Ardo et al) 39; 1988 Warrendale PA Metallurgical Society of AIME.
55. Richardson F. D., and Jeffes J. H. E.: J. Iron Steel Inst., 1948, 160, 261–265.
56. 10.2355/isijinternational.42.63610.2355/isijinternational.42.636 ↗
57. Li Y. Crowther D. N. Mitchell P. S. and Baker T. N.: Proc. 4th Int. Conf. on ‘HSLA steels’ (ed.Liu G. et al) 326-332; 2000 Beijing The Metallurgical Press.
58. Cuddy L. J.: in ‘Themomechanical processing of microalloyed austenite’ (ed. A. J. DeArdo et al) 129-140; 1982 Warrendale PA The Metallurgical Socociety of AIME.
59. 10.1179/09506600322500883310.1179/095066003225008833 ↗
60. 10.1007/BF0264976310.1007/BF02649763 ↗
61. Brown E. L. DeArdo A. J. and Bucher H. H.: ‘Hot deformation of austenite’ 250-285; 1977 New York The Metallurgical Society of AIME.
62. 10.1007/BF0281924910.1007/BF02819249 ↗
63. 10.1007/BF0267069610.1007/BF02670696 ↗
64. 10.1007/BF0264416910.1007/BF02644169 ↗
65. 10.1007/BF0265456210.1007/BF02654562 ↗
66. 10.1016/S0921-5093(00)01940-710.1016/S0921-5093(00)01940-7 ↗
67. 10.1179/02670830122500074310.1179/026708301225000743 ↗
68. 10.1007/BF0266236410.1007/BF02662364 ↗
69. 10.1179/03063458079042648110.1179/030634580790426481 ↗
70. Honeycombe R. W. K.: in ‘Processing microstructure and properties of HSLA steels’ (ed.DeArdo A. J. et al) 1-38; 1988 Warrendale PA Metallurgical Society of AIME.
71. 10.1179/03063456879044334110.1179/030634568790443341 ↗
72. 10.1007/BF0303785410.1007/BF03037854 ↗
73. Sutton H. C., and Whiteman J. A.: J. Iron Steel Inst., 1971, 209, 220–225.
74. Edmonds D. V.: J. Iron Steel Inst., 1972, 210, 363–365.
75. Batte A. D., and Honeycombe R. W. K.: J. Iron Steel Inst., 1973, 211, 284–289.
76. 10.1007/BF0265456610.1007/BF02654566 ↗
77. Baker T. N.: J. Iron Steel Inst., 1973, 211, 502–510.
78. Berry F. G. Davenport A. T. and Honeycombe R. W. K.: Proc. Conf. on ‘Mechanism of phase transformations in crystalline solids’ 288-292; 1969 London The Institute of Metals.
79. Davenport A. T., and Honeycombe R. W. K.: Proc. Roy. Soc. Lond. A, 1971, 332A, 191–205.10.1098/rspa.1971.0063 ↗
80. 10.1007/BF0264425410.1007/BF02644254 ↗
81. Edmonds D. V., and Honeycombe R. W. K.: J. Iron Steel Inst., 1973, 211, 209–216.
82. 10.1080/03063453.1974.1191076610.1080/03063453.1974.11910766 ↗
83. 10.1016/0956-7151(94)00474-V10.1016/0956-7151(94)00474-V ↗
84. Morrison W. B.: Mater. Sci, Technol., 1985, 1, 954–960.
85. Morrison W. B.: J. Iron Steel Inst., 1963, 201, 317–325.
86. Leslie W. B.: Proc. Conf. on ‘The relationship between structure and mechanical properties of metals’ 334; 1963 London HMSO.
87. Gray J. M., and Yeo R. B. G.: Q. Trans. ASM, 1968, 61, 225–269.
88. 10.1179/03063458479041979110.1179/030634584790419791 ↗
89. Stephenson E. T., , Karchner G. M., and Stark P.: Trans. Ant Soc. Metall., 1964, 57, 208–216.
90. 10.2320/jinstmet1952.29.7_72810.2320/jinstmet1952.29.7_728 ↗
91. Woodhead J. H., and Webster D.: J. Iron Steel Inst., 1969, 207, 51–53.
92. Freeman S.: Proc. Conf. on ‘Effect of second phase particles on the mechanical properties of steel’ 152-156; 1971 London The Iron and Steel Institute.
93. 10.1007/BF0264405710.1007/BF02644057 ↗
94. Honeycombe R. W. K.: Proc. Int. Conf. on ‘Technology and applications of HSLA steels’ 243-250; 1983 Philadelphia PA ASM.
95. Roberts W.: Internal report no. IM-1333 Swedish Institute for Metals Research Stockholm Sweden 1978.
96. 10.1007/s11661-001-0249-910.1007/s11661-001-0249-9 ↗
97. 10.1179/mst.1993.9.5.38410.1179/mst.1993.9.5.384 ↗
98. Baker T. N.: Proc. Conf. on ‘Effect of second phase particles on the mechanical properties of steel’ 204; 1971 London The Iron and Steel Institute.
99. 10.1007/BF0265456610.1007/BF02654566 ↗
100. Jack K. H.: Scand J. Metall., 1972, 1, 195–202.