Overview of modelling and simulation of metal powder bed fusion process at Lawrence Livermore National Laboratory
Source abstract
Abstract
The metal laser powder bed fusion additive manufacturing process uses high power lasers to build parts layer upon layer by melting fine metal powders. Qualification of parts produced using this technology is broadly recognised as a significant challenge. Physics based process models have been identified as being foundational to qualification of additively manufactured metal parts. In the present article, a multiscale modelling strategy is described that will serve as the foundation upon which process control and part qualification can be built. This includes a model at the scale of the powder that simulates single track/single multilayer builds and provides powder bed and melt pool thermal data. A second model computationally builds a complete part and predicts manufactured properties (residual stress, dimensional accuracy) in three dimensions. Modelling is tied to experiment through data mining.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Physical and Life Sciences Directorate, Lawrence Livermore National Laboratory, Livermore, CA 94551, USA
Engineering Directorate, Lawrence Livermore National Laboratory, Livermore, CA 94551, USA
Computations Directorate, Lawrence Livermore National Laboratory, Livermore, CA 94551, USA
References (69)
Show source-provided references
1. Anon: ‘3D printing and the new shape of industrial manufacturing’; 2014, Delaware, PricewaterhouseCoopers LLP.
2. Bourell DL, Leu MC and Rosen DW: ‘Roadmap for additive manufacturing identifying the future of freeform processing’; 2009, Austin TX, The University of Texas at Austin.
3. Energetics Incorporated: ‘Measurement science roadmap for metal-based additive manufacturing’; 2013, Columbia, MD, Energetics Incorporated.
4. Berger R: ‘Additive manufacturing a game changer for the manufacturing industry?’; 2013, Munich, Roland Berger Strategy Consultants GmbH.
5. 10.1016/j.jmatprotec.2010.12.01610.1016/j.jmatprotec.2010.12.016 ↗
6. Solberg JM, Hodge NE, Ferencz RM, Parsons ID, Puso MA, Havstad MA, Whitesides RA and Wemhoff AP: ‘Diablo user manual’, LLNL-SM-651163; 2014, Livermore, CA, Lawrence Livermore National Laboratory.
7. McCallen C: ‘ALE3D: arbitrary lagrange eulerian three- and two dimensional modeling and simulation capability’, LLNL-ABS-565212; 2012, Livermore, CA, Lawrence Livemore National Laboratory.
8. 10.1016/S0890-6955(01)00093-110.1016/S0890-6955(01)00093-1 ↗
9. Gusarov AV and Kruth JP: ‘Mathematical simulation of radiation transfer in the powder bed: application to selective laser sintering’, 209-216; 2003, Leiria, Escola Superior Tecnologia Gestao Leiria.
10. 10.1108/1355254031050221110.1108/13552540310502211 ↗
11. Gusarov AV · J. Heat Transfer · 2009 · 13110.1115/1.3109245 ↗
12. Gusarov AV and Smurov I: ‘Modeling the interaction of laser radiation with powder bed at selective laser melting’, Physics Procedia, 2010, 5, 381–394; 2010.10.1016/j.phpro.2010.08.065 ↗
13. 10.1016/j.ijheatmasstransfer.2005.01.04410.1016/j.ijheatmasstransfer.2005.01.044 ↗
14. 10.1070/QE2010v040n05ABEH01397610.1070/QE2010v040n05ABEH013976 ↗
15. 10.1108/1355254041051250710.1108/13552540410512507 ↗
16. 10.1016/j.actamat.2003.08.02810.1016/j.actamat.2003.08.028 ↗
17. Krol TA, Westhäuser S, F ZM and Groth C: ‘Dynamic coupling of fe-models for additive manufacturing to regard the customer requirements’, Proc. ANSYS Conf. & 28th CADFEM Users’ Meeting, Aachen, Germany, 3-5 November 2010, CADFEM GMBH (HRSG), 1–14.
18. 10.1016/j.cirp.2011.03.10910.1016/j.cirp.2011.03.109 ↗
19. 10.1007/s11740-009-0192-y10.1007/s11740-009-0192-y ↗
20. Krol TA, Zaeh MF and Seidel C: ‘Optimization of supports in metal-based additive manufacturing by means of finite element models’, Proc. Int. Solid Freeform Fabrication Symp. – An Additive Manufacturing Conf., Austin, TX, 2012, University of Texas at Austin, 707–718.
21. 10.1016/j.procir.2013.09.03010.1016/j.procir.2013.09.030 ↗
22. Zaeh MF · 2010 · 415
23. Krol TA · 2013 · 842
24. 10.1007/s11740-009-0197-610.1007/s11740-009-0197-6 ↗
25. Eschey C, Lutzmann S and Zaeh MF: ‘Examination of the powder spreading effect in electron beam melting (EBM)’, Proc. 20th Annual Int. Solid Freeform Fabrication Symp. – An Additive Manufacturing Conf., Austin, TX, 2009, University of Texas at Austin, 308–319.
26. Pal D, Patil N, Nikoukar M, Zeng K, Kutty KH and Stucker BE: ‘An integrated approach to cyber-enabled additive manufacturing using physics based, coupled multi-scale process modeling’, Proc. 24th Annual Int. Solid Freeform Fabrication Symp. – An Additive Manufacturing Conf., Austin, TX, USA, August 2013, University of Texas at Austin, 1–18.
27. Nikoukar M, Patil N, Pal D and Stucker B: ‘Methods for enhancing the speed of numerical calculations for the prediction of the mechanical behavior of parts made using additive manufacturing’, Proc. 24th Annual Int. Solid Freeform Fabrication Symp. – An Additive Manufacturing Conf., Austin, TX, USA, August 2013, University of Texas at Austin, 525–534.
28. Anam MA, Pal D and Stucker B: ‘Modeling and experimental validation of nickel-based super alloy (Inconel 625) made using selective laser melting’, Proc. 24th Annual Int. Solid Freeform Fabrication Symp. – An Additive Manufacturing Conf., Austin, TX, USA, August 2013, University of Texas at Austin, 463–473.
29. Zeng K, Pal D, Patil N and Stucker B: ‘A new dynamic mesh method applied to the simulation of selective laser melting’, Proc. 24th Annual Int. Solid Freeform Fabrication Symp. – An Additive Manufacturing Conf., Austin, TX, USA, August 2013, University of Texas at Austin, 549–559.
30. Patil N, Pal D and Stucker B: ‘A new finite element solver using numerical eigen modes for fast simulation of additive manufacturing processes’, Proc. 24th Annual Int. Solid Freeform Fabrication Symp. – An Additive Manufacturing Conf., Austin, TX, USA, August 2013, University of Texas at Austin, 535–548.
31. Pal D and Stucker BE: ‘Modelling of ultrasonic consolidation using a dislocation density based finite element framework’, Virtual and Physical Prototyping, 2012, 7, (1), 65–79.10.1080/17452759.2012.671774 ↗
32. Neugebauer F, Keller N, Ploshikhin V, Feuerhahn F and Köhler H: ‘Multi scale FEM simulation for distortion calculation in additive manufacturing of hardening stainless steel’, Proc. Int. Workshop on ‘Thermal forming and welding distortion’, Bremen, April 2014, 2014, BIAS Verlag.
33. Neugebauer F, Keller N, Xu H, Kober C and Ploshikhin V: ‘Simulation of selective laser melting using process specific layer based meshing’, Proc. Fraunhofer Direct Digital Manufacturing Conf. (DDMC 2014), Axel Demmer, Aachen, Germany, March 2014, 2014, Fraunhofer Verlag, 297–302.
34. Keller N, Neugebauer F, Xu H and Ploshikhin V: ‘Multi-scale simulations of additive layer manufacturing of titanium aerospace structures’, presentation, Bremen, Germany, 4 September 2013, Bremen, Lightmat.
35. Xu H, Keller N, Ploshikhin V, Prihodovsky A, Ilin A, Logvinov R, Kulikov A, Günther B, Windfelder J and Bechmann F: ‘Towards improved thermal management of laser beam melting processes’, Proc. Fraunhofer Direct Digital Manufacturing Conf. (DDMC 2014), Axel Demmer, March 2014, Fraunhofer Verlag, 173–178.
36. 10.1016/j.ijheatfluidflow.2010.09.00610.1016/j.ijheatfluidflow.2010.09.006 ↗
37. Parteli EJR · 2013 · 185
38. Gurtler FJ · 2013 · 874
39. 10.1088/0022-3727/47/6/06530710.1088/0022-3727/47/6/065307 ↗
40. 10.1007/s00339-013-7944-410.1007/s00339-013-7944-4 ↗
41. 10.1088/0022-3727/47/27/27530310.1088/0022-3727/47/27/275303 ↗
42. 10.1007/s00466-014-1012-610.1007/s00466-014-1012-6 ↗
43. 10.1177/108128651350547210.1177/1081286513505472 ↗
44. 10.1007/s11831-013-9092-610.1007/s11831-013-9092-6 ↗
45. Zohdi TI · Proc. R. Soc. London A · 2012 · 468 · 2174
46. 10.1016/j.procir.2014.03.01510.1016/j.procir.2014.03.015 ↗
47. 10.1016/j.cirp.2011.03.06310.1016/j.cirp.2011.03.063 ↗
48. 10.1007/s00466-014-1024-210.1007/s00466-014-1024-2 ↗
49. 10.1016/j.jmatprotec.2014.06.00110.1016/j.jmatprotec.2014.06.001 ↗
50. 10.1007/s00170-014-5954-910.1007/s00170-014-5954-9 ↗
51. Hughes TJR: ‘The finite element method : linear static and dynamic finite element analysis’; 1987, Englewood Cliffs, NJ, Prentice-Hall.
52. Zienkiewicz OC, Taylor RL and Zhu JZ: ‘The finite element method its basis and fundamentals’, 2005 viewed 2014 November 10, available from: http://www.books24x7.com/marc.asp?bookid = 37286.
53. Simo JC and Hughes TJR: ‘Computational inelasticity’, 1998 viewed 2014 November 10, available from: http://site.ebrary.com/id/10005118.
54. 10.1007/BF0266733310.1007/BF02667333 ↗
55. 10.1007/s00170-012-4271-410.1007/s00170-012-4271-4 ↗
56. Kruth JP, Mercelis P, Van Vaerenbergh J and Craeghs T: ‘Feedback control of selective laser melting’, 521–527; 2008, London, Taylor & Francis Ltd.
57. Wu A · Metall. Mater. Trans. A · 2014 · 45 · 1
58. 10.1016/0029-5493(81)90155-210.1016/0029-5493(81)90155-2 ↗
59. 10.1016/j.cirp.2007.10.00410.1016/j.cirp.2007.10.004 ↗
60. 10.1117/12.205254110.1117/12.2052541 ↗
61. Clijsters S, Craeghs T and Kruth JP: ‘A priori process parameter adjustment for SLM process optimization’, 553–560; 2012, Boca Raton, CRC Press-Taylor & Francis Group.10.1201/b11341-89 ↗
62. 10.1137/1.978089871769310.1137/1.9780898717693 ↗
63. Eagar TW · Weld. J. · 1983 · 62 · S346
64. AZO Materials: Stainless Steel - Grade 316L - Properties, Fabrication and Applications (UNS S31603) available from: http://www.azom.com/article.aspx?ArticleID = 2382#_Key_Properties.
65. Oehlert GW: ‘A first course in design and analysis of experiments’; 2000, New York, W. H. Freeman.
66. 10.1016/j.jmatprotec.2014.06.00510.1016/j.jmatprotec.2014.06.005 ↗
67. 10.1007/978-0-387-68628-810.1007/978-0-387-68628-8 ↗
68. 10.1016/j.jmatprotec.2010.05.01010.1016/j.jmatprotec.2010.05.010 ↗
69. 10.1016/j.phpro.2011.03.03510.1016/j.phpro.2011.03.035 ↗