journal article·1987-03

Effect of composition and process variables on Nb(C, N) precipitation in niobium microalloyed austenite

B. Dutta, C. M. Sellars

Publisher page

Abstract

Nucleation theory and the solubility product of niobium, carbon, and nitrogen in austenite have been used to derive equations for the start of Nb (C, N) precipitation as a function of temperature and composition. The predicted curves have been compared with the experimental observations of several authors to determine the effects of thermomechanical processing variables on the density of preferred nucleation sites and to incorporate these in the equations. Good agreement between the predicted and observed forms of precipitation curve is obtained with consistent constants in the equations when account is taken of the influence of different methods of detecting the onset of precipitation. Combining the calculated precipitation start curves with the dependence of recrystallization kinetics on composition and thermomechanical process variables when all niobium is in solution leads to prediction of the lower temperature limit for complete recrystallization and of the upper temperature limit for effective stoppage of recrystallization by precipitation. The predictions are in good agreement with observed results.MST/495
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. IRVINE K. J. · J. Iron Steel Inst., · 1967 · 205 · 161
2. MORI T. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1965 · 51 · 2031
3. MEYER L. · Z. Metallkd., · 1966 · 58 · 334
4. NORDBERG H. · J. Iron Steel Inst., · 1968 · 206 · 1263
5. SMITH R. P. · Trans. AIME · 1966 · 236 · 220
6. KOYAMA S. · J. Jpn Inst. Met., · 1971 · 35 · 69810.2320/jinstmet1952.35.7_698 ↗
7. KOYAMA S. · J. Jpn Inst. Met., · 1971 · 35 · 108910.2320/jinstmet1952.35.11_1089 ↗
8. coREN M. · STP 672, ‘MiCon 78', 34; 1979, Philadelphia, Pa, American Society for Testing and Materials
9. 10.1007/BF0266052610.1007/BF02660526 ↗
10. 10.1016/0001-8686(80)80003-010.1016/0001-8686(80)80003-0 ↗
11. J. ASHELL: ‘Alloys and simple oxides’; 1970, New York, Plenum Publishing Corp.
12. WöHLBIER F. H. · Materials Review Series · 12
13. SPARKE B. · J. Iron Steel Inst., · 1965 · 203 · 152
14. KUROKAWA S. · Brazil · 1981 · 1 · 47
15. 10.1179/03063458379042062810.1179/030634583790420628 ↗
16. H. J. GOLDSCHMIDT: ‘Advances in X-ray analysis’, Vol. 5, 191; 1961, New York, Plenum Press.10.1154/S0376030800001555 ↗
17. 10.1021/j150563a03010.1021/j150563a030 ↗
18. IANAMPA C. S. · PhD thesis, 1982, University of Sheffield
19. J. W. CHRISTIAN: ‘The theory of transformations in metals and alloys’, 1965, Oxford, Pergamon Press.
20. 10.1179/03063457579044491910.1179/030634575790444919 ↗
21. 10.1007/BF0265456310.1007/BF02654563 ↗
22. S. YAMAMOTO, C. citron, and T. OSUICA: ‘Thermomechanical processing of microalloyed austenite', (eds. P. J. Wray, A. J. DeArdo, G. A. Ratz), 613-638; 1982, Warrandale, Pa., The Metallurgical Society of AIME.
23. A. WATANABE, Y. E. SMITH, and R. D. PEHLKA: in ‘Hot deformation of austenite’, (ed. J. B. Ballance), 140–168, 1977, New York, The Metallurgical Society of AIME.
24. Le A. · Mém. Sci. Rev. Metall., · 1973 · 70 · 57710.1051/metal/197370090577 ↗
25. 10.1179/msc.1978.12.8.38110.1179/msc.1978.12.8.381 ↗
26. JIZAIMARU J. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1974 · 60 · 177
27. T. M. HOOGENDORN and M. J. SPANRAFT: ‘MiCrOallOying ‘75’, 75-87; 1977, New York, Union Carbide Corporation.
28. MATZUMATA Y. · Personal communication, Swedish Institute of Metals Research
29. C. M. SELLARS: ‘Deformation, processing and structure’, (ed. G. Krauss, 245-277; 1982, Metals Park, Ohio, American Society for Metals.
30. DUTTA B. · PhD thesis, 1986, University of Sheffield
31. VALDES E. · PhD research, 1986, University of Sheffield
32. 10.1179/msc.1979.13.3-4.23810.1179/msc.1979.13.3-4.238 ↗
33. T. TANAKA: ‘Hot deformation of steels’, 55-72; 1980, Tokyo, Iron and Steel Institute of Japan.
34. C. M. SELLARS: ‘Hot working and forming processes’, (eds. C. M. Sellars and G. J. Davies), 3-15; 1980, London, The Metals Society.
35. 10.1007/BF0264234510.1007/BF02642345 ↗
36. L. J. CUDDY: ‘Thermo-mechanical processing of microalloyed austenite’, (eds. P. J. Wray, A. J. DeArdo, and G. A. Ratz), 129-140; 1982, Warrendale, Pa, The Metallurgical Society of AIME.
37. B. MIGAUD: ‘Hot working and forming processes’, (eds. C. M. Sellars and G. J. Davies), 67-76; 1980, London, The Metals Society.
38. DurrA B. · Mater. Sci. Technol., 1986, 2, 146-153.