Comparison of different methods for measuring strain induced α-martensite content in austenitic steels
Source abstract
Abstract
Several techniques for measuring the strain induced α-martensite content in EN 1.4318 (AISI 301LN) and EN 1.4301 (AISI 304) austenitic stainless steels were compared in order to determine a correlation curve between Ferritescope measurement results and actual α-martensite contents. The studied methods involved Satmagan measurement, magnetic balance measurement, X-ray diffraction, density measurement and quantitative optical metallography. Satmagan, magnetic balance and density measurements were found to give equal α-martensite contents. X-ray diffraction results were affected by the texture but averaging of several diffraction peaks improved the reliability of the results. It was shown that α-martensite can be detected by means of optical metallography, but quantitative analysis is time consuming and inaccurate. The relationship between the Ferritescope results and actual α-martensite contents measured with the other techniques was found to be linear. According to the results, the Ferritescope readings can be converted to actual α-martensite contents by multiplying with a correction factor of 1.7.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. BRESSANELLI J. P. · ASM Trans · 1966 · 59 · 223
2. BOWICETT M. W. · Met. Sci · 1982 · 16 · 499
3. 10.1007/BF0264200310.1007/BF02642003 ↗
4. 10.1007/BF0264200410.1007/BF02642004 ↗
5. ANGEL T. · J. Iron Steel Inst · 1954 · 177 · 165
6. POWELL G. W. · ASM Trans · 1958 · 50 · 478
7. 10.1007/BF0264442710.1007/BF02644427 ↗
8. NOHARA K. · J. Iron Steel Inst. Jpn · 1977 · 63 · 212
9. ARNELL R. D. · J. Iron Steel Inst · 1968 · 206 · 1035
10. 10.1023/A:100475551418810.1023/A:1004755514188 ↗
11. 10.1016/0025-5416(84)90039-910.1016/0025-5416(84)90039-9 ↗
12. 10.1016/0025-5416(77)90216-610.1016/0025-5416(77)90216-6 ↗
13. 10.1007/BF0055224210.1007/BF00552242 ↗
14. 10.1007/BF0264204210.1007/BF02642042 ↗
15. s. F. PETERSON: 'Formability of austenitic stainless steels', MSc thesis, Colorado School of Mines, USA, 1996.
16. MILLER R. L. · Trans. Am. Soc. Mater · 1964 · 57 · 892
17. B. D. CULLITY and S. R. STOCK: 'Elements of X-ray diffraction', 3rd edn, 664; 2001, Upper Saddle River, NJ, Prentice Hall.
18. C. H. MACGILLAVRY and G. D. RIECK: 'International tables for X-ray crystallography, vol. III, Physical and chemical tables', 362; 1985, Dordrecht, Reidel.
19. R. H. PERRY and D. W. GREEN: Terry's chemical engineers' handbook', 2550; 1997, New York, McGraw-Hill.