Processing AlSi10Mg by selective laser melting: Parameter optimisation and material characterisation
Source abstract
Abstract
Owing to their attractive combination of mechanical properties, high heat conductivity and low weight, the Al–Si alloys found a large number of applications in the Additive Manufacturing field for automotive, aerospace and domestic industries. However, due to their high reflectivity and heat conductivity, they are harder to process by Selective Laser Melting. This work elaborates on both the optimisation of process parameters, in order to get nearly fully dense parts, and the material properties resulting from this specific material process combination. A process parameter window is defined, in which the formed melt pool is stable and meets the set requirements. In this process window, the parameter set for optimal density is defined. It is shown that AlSi10Mg parts produced by SLM have mechanical properties higher or at least comparable to the cast material because of the very fine microstructure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Leuven (KU Leuven), Department of Mechanical Engineering, Celestijnenlaan 300, 3001 Leuven, Belgium
LayerWise nv, Grauwmeer 14, 3001 Leuven, Belgium
University of Leuven (KU Leuven), Department of Materials Engineering, Kasteelpark arenberg 44, 3001 Leuven, Belgium
References (19)
Show source-provided references
1. 10.1016/j.jmatprotec.2003.11.05110.1016/j.jmatprotec.2003.11.051 ↗
2. Vilaro T, Abed S and Knapp W: ‘Direct manufacturing of technical parts using selective laser melting: example of automotive application’, Proc. 12th European Forum on ‘Rapid prototyping’, Paris, France, March 2008, Protolabs.
3. 10.1108/1355254071082479710.1108/13552540710824797 ↗
4. ‘ASM handbook’, Vol. 2, ‘Properties and selection: nonferrous alloys and special-purpose materials’, ch. 1, 3–14; 1990, Materials Park, OH, ASM International.
5. 10.1016/j.jmatprotec.2010.09.01910.1016/j.jmatprotec.2010.09.019 ↗
6. Voncina M · RMZ Mater. Geoenviron. · 2006 · 52 · 621
7. 10.1016/j.matdes.2011.07.06710.1016/j.matdes.2011.07.067 ↗
8. 10.1016/j.jmatprotec.2013.03.00910.1016/j.jmatprotec.2013.03.009 ↗
9. 10.1016/j.jmatprotec.2010.09.00310.1016/j.jmatprotec.2010.09.003 ↗
10. GmbH CL: ‘Concept laser’. On the WWW, May. http://www.concept-laser.de. 2014.
11. Technology L: Lpw technology ltd. On the WWW, May. http://www.lpwtechnology.com. 2014.
12. 10.1016/S0007-8506(07)60676-310.1016/S0007-8506(07)60676-3 ↗
13. 10.1016/j.jmatprotec.2010.05.01010.1016/j.jmatprotec.2010.05.010 ↗
14. 10.1108/1355254041052695310.1108/13552540410526953 ↗
15. Ion J: ‘Laser processing of engineering materials: principles, procedure and industrial application’; 2005, Oxford, Elsevier Butterworth-Heinemann.
16. Thijs L · Acta Mater. · 2012 · 61 · 180910.1016/j.actamat.2012.11.052 ↗
17. Flagship: ‘Heat treated aluminium high pressure die castings’, Technical data sheets, May 2014.
18. ‘ASM handbook’, Vol. 1 to 4; 1991, Materials Park, OH, ASM International.
19. 10.31399/asm.tb.aacppa.978162708335510.31399/asm.tb.aacppa.9781627083355 ↗