A review of wire arc additive manufacturing and advances in wire arc additive manufacturing of aluminium
Source abstract
Abstract
Although wire arc additive manufacturing (WAAM) has proven its capability of fulfilling demands of production of medium-to-large-scale components for automotive and allied sectors made up of aluminium, at present, WAAM cannot be applied as a fully fledged manufacturing process because of practical challenges such as under-matched mechanical properties, the presence of large residual stresses and mandatory post-deposition operation for the formed component. This paper is a review of WAAM technology including a brief of WAAM history, status, advantages and constraints of the WAAM field. A focus is provided including the efforts directed towards the reduction of porosity, tensile properties, microstructural investigations and other valuable advancements in the field of WAAM of aluminium. This review was submitted as part of the 2018 Materials Literature Review Prize of the Institute of Materials, Minerals and Mining run by the Editorial Board of MST. Sponsorship of the prize by TWI Ltd is gratefully acknowledged.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Engineering, Environment and Computing, Coventry University, Coventry, UK
National Structural Integrity Research Centre (NSIRC Ltd), Cambridge, UK
Funding
Coventry University · Lloyd's Register Foundation · National Structural Integrity Research Centre
References (100+)
Show source-provided references
1. 10.1016/j.jclepro.2016.04.15010.1016/j.jclepro.2016.04.150 ↗
2. 10.1016/j.cirp.2016.05.00410.1016/j.cirp.2016.05.004 ↗
3. 10.1016/j.autcon.2016.08.02610.1016/j.autcon.2016.08.026 ↗
4. Gao W, Zhang Y, Ramanujan D, The status, challenges, and future of additive manufacturing in engineering. Comput Des [Internet]. 2015;69:65–89. Available from: http://linkinghub.elsevier.com/retrieve/pii/S0010448515000469.10.1016/j.cad.2015.04.001 ↗
5. TWI-global [Internet]. [cited 2018 Jan 22]. Available from: https://www.twi-global.com/technical-knowledge/best-practiceguides/%0Aarc-welding-aluminium-section-2-process-and-consumables-selection/
6. Xu W, Gottos M, Roe M, Impact tests on welded joints in 6000 series aluminium alloy extrusion for rail vehicles, Cambridge. 2008.
7. Baker R. Method of making decorative articles. United States patent [Internet]. 1920:1–3. Available from: https://drive.google.com/viewerng/viewer?url=patentimages.storage.googleapis.com/pdfs/US1533300.pdf.
8. Shockey H. Machine for reclaiming worn brake drums [Internet]. United Staets patent US1886503A. 1930: 1–3. Available from: https://patents.google.com/patent/US1886503A/en?q=MACHINE&q=FOR&q=RECLAIMING&q=WORN&q=BRAKE+DRUMS&oq=MACHINE+FOR+RECLAIMING+WORN+BRAKE+DRUMS
9. Ujiie A. United States Patent. 1971; Available from: https://www.google.com/patents/US3558846?dq=ujiie+1971&hl=en&sa=X&ei=nmwQVMyECsGzuASw3oHYAw&ved=0CB0Q6AEwAA
10. Ujiie A. Process and apparatus for tripple-electrode MIG welding using short-circuit and spray-arc deposition. United States patent US3746833A. 1972;2–7.
11. Kussmaul K · Weld J · 1983 · 62 · 17
12. Dickens PM · 1992 · 280
13. Ribeiro F. Metal based rapid prototyping for more complex shapes. Biennial international conference on “Computer Technology In Welding” [Internet]. Cambridge: The Welding Institute; 1996. p. 1–11. Available from: http://hdl.handle.net/1822/3119
14. 10.1016/S0957-4158(00)00064-710.1016/S0957-4158(00)00064-7 ↗
15. 10.4028/www.scientific.net/AMR.996.69410.4028/www.scientific.net/AMR.996.694 ↗
16. Martina F, Williams SW, Colegrove P. Improved microstructure and increased mechanical properties of additive manufacture produced Ti-6Al-4V by interpass cold rolling. SFF Symp [Internet]. 2013: 490–496. Available from: http://sffsymposium.engr.utexas.edu/Manuscripts/2013/2013-38-Martina.pdf
17. 10.1016/j.matchar.2016.02.00110.1016/j.matchar.2016.02.001 ↗
18. 10.1007/s11661-015-3172-110.1007/s11661-015-3172-1 ↗
19. 10.1016/j.ijmachtools.2004.11.02210.1016/j.ijmachtools.2004.11.022 ↗
20. Nobel P. Method and apparatus for electric arc welding. United States patent US1898060A. 1919;1–12.
21. Carpenter O, Kerr H. Method and apparatus for metal coating metal pipes by electric fusion. United States patent US2427350A. 1943;1–10.
22. White W. Pressure roller and method of manufacture. United States patent. US3156968A. 1962;2–5.
23. Brandi H, Luckow H. Method of making large structural one-piece parts of metal, particularly one-piece shafts. United States patent US3985995A. 1976;1–8.
24. Hitoshi T. Production of powder of metal or nonmetal or alloy thereof. European patent office JP19830003867 19830113. 1984;59129702(c):5–6.
25. Ayres P, Edmonds D, Hartwig D, Method and apparatus for controlling weld bead shape to eliminate microfissure defects when shape melting austenitic materials. United States patent US4782206A. 1987;1–10.
26. Doyle T, Ryan P. Method and apparatus for automatic vapor cooling when shape melting a component. United States patent US4857694A. 1988;1–7.
27. Muscato G, Spampinato G, Cantelli L. A closed loop welding controller for a rapid manufacturing process. IEEE Int Conf Emerg Technol Fact Autom ETFA. 2008;1080–1083.10.1109/ETFA.2008.4638529 ↗
28. Irving R. · Iron Age · 1970 · 205
29. 10.1007/978-3-642-15973-2_7310.1007/978-3-642-15973-2_73 ↗
30. 10.1177/095440541243712610.1177/0954405412437126 ↗
31. 10.1504/IJPD.2014.06002810.1504/IJPD.2014.060028 ↗
32. 10.1007/s00170-014-5808-510.1007/s00170-014-5808-5 ↗
33. 10.1016/j.cirp.2015.04.10910.1016/j.cirp.2015.04.109 ↗
34. 10.1016/j.procir.2016.08.04310.1016/j.procir.2016.08.043 ↗
35. 10.1016/j.jclepro.2016.06.03610.1016/j.jclepro.2016.06.036 ↗
36. 10.1115/DETC2014-3465810.1115/DETC2014-34658 ↗
37. 10.1007/s00170-016-9898-010.1007/s00170-016-9898-0 ↗
38. 10.1007/s12666-016-1032-310.1007/s12666-016-1032-3 ↗
39. 10.1016/j.jmatprotec.2015.08.02110.1016/j.jmatprotec.2015.08.021 ↗
40. 10.3390/app712123310.3390/app7121233 ↗
41. 10.1016/j.promfg.2017.09.15410.1016/j.promfg.2017.09.154 ↗
42. 10.1016/j.jmatprotec.2017.12.01910.1016/j.jmatprotec.2017.12.019 ↗
43. 10.1243/09544054JEM78310.1243/09544054JEM783 ↗
44. 10.1016/j.commatsci.2011.06.02310.1016/j.commatsci.2011.06.023 ↗
45. 10.1179/1743284715Y.000000007310.1179/1743284715Y.0000000073 ↗
46. 10.1007/s00170-016-9510-710.1007/s00170-016-9510-7 ↗
47. 10.1016/j.scriptamat.2016.10.03110.1016/j.scriptamat.2016.10.031 ↗
48. 10.1016/j.matdes.2015.09.11510.1016/j.matdes.2015.09.115 ↗
49. 10.1016/j.jmatprotec.2013.11.01410.1016/j.jmatprotec.2013.11.014 ↗
50. 10.1007/s00170-015-7112-410.1007/s00170-015-7112-4 ↗
51. 10.1016/j.rcim.2014.08.00810.1016/j.rcim.2014.08.008 ↗
52. 10.1007/s11665-016-2480-y10.1007/s11665-016-2480-y ↗
53. 10.1007/s00170-016-8543-210.1007/s00170-016-8543-2 ↗
54. 10.1016/j.jmatprotec.2016.10.01910.1016/j.jmatprotec.2016.10.019 ↗
55. 10.1016/j.jmatprotec.2013.04.01210.1016/j.jmatprotec.2013.04.012 ↗
56. Martina F · 2014 · 89
57. Honnige J, Williams S, Roy M, Residual Stress Characterization and Control in the Additive Manufacture of Large Scale Metal Structures. Material research proceedings [Internet]. 2016. p. 455–460. Available from: http://www.mrforum.com/product/9781945291173-77
58. 10.1016/j.msea.2015.10.10110.1016/j.msea.2015.10.101 ↗
59. 10.1016/j.jmatprotec.2015.11.00610.1016/j.jmatprotec.2015.11.006 ↗
60. 10.1016/j.msea.2017.11.11310.1016/j.msea.2017.11.113 ↗
61. Almeida P · Solid Free Fabr Symp · 2010 · 25
62. 10.4028/www.scientific.net/AMM.465-466.137010.4028/www.scientific.net/AMM.465-466.1370 ↗
63. 10.1007/s00170-014-6346-x10.1007/s00170-014-6346-x ↗
64. 10.1016/S1875-5372(16)30080-710.1016/S1875-5372(16)30080-7 ↗
65. 10.3390/app703027510.3390/app7030275 ↗
66. 10.1016/j.msea.2017.11.08410.1016/j.msea.2017.11.084 ↗
67. Wang F, Williams S, Colegrove P, Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V. Metall Mater Trans A [Internet]. 2013 Feb 28 [cited 2018 Mar 1];44(2):968–977. Available from: http://link.springer.com/10.1007/s11661-012-1444-6.10.1007/s11661-012-1444-6 ↗
68. 10.1016/j.matdes.2015.10.14110.1016/j.matdes.2015.10.141 ↗
69. 10.1016/j.matdes.2016.05.02710.1016/j.matdes.2016.05.027 ↗
70. Zhang X, Martina F, Ding J, Fracture toughness and fatigue crack growth rate properties in wire+arc additive manufactured Ti-6Al-4V. Fatigue Fract Eng Mater Struct [Internet]. 2017 May 1 [cited 2018 Mar 1];40(5):790–803. Available from: http://doi.wiley.com/10.1111/ffe.12547.10.1111/ffe.12547 ↗
71. 10.1016/S0924-0136(02)00867-110.1016/S0924-0136(02)00867-1 ↗
72. Adebayo A · Trends Weld Res Proc 9th Int Conf · 2013 · 3 · 1038
73. 10.1115/1.400244510.1115/1.4002445 ↗
74. 10.1016/j.ijheatmasstransfer.2009.02.02010.1016/j.ijheatmasstransfer.2009.02.020 ↗
75. 10.1088/0022-3727/25/11/01210.1088/0022-3727/25/11/012 ↗
76. 10.1179/174329305X4413410.1179/174329305X44134 ↗
77. Kou S. Metallurgy second edition welding metallurgy [Internet]. Vol. 822, Wiley. 2003. P. 466. Available from: http://books.google.com/books?hl=en&lr=&id=N8gICBzzgRwC&oi=fnd&pg=PR7&dq=WELDING+METALLURGY&ots=KbMCYOBY2l&sig=bUKTMZRhqD6LE6kzQIivLlTfJK4
78. Martina F, Williams S. Wire + arc additive manufacturing vs. traditional machining from solid: a cost comparisonfrom solid: 2015;
79. Gu D. Laser Additive Manufacturing (AM): Classification, Processing Philosophy, and Metallurgical Mechanisms [Internet]. Laser Additive Manufacturing of High-Performance Materials. 2015. 15–71 p. Available from: http://link.springer.com/10.1007/978-3-662-46089-4_210.1007/978-3-662-46089-4_2 ↗
80. 10.1016/j.actamat.2016.07.01910.1016/j.actamat.2016.07.019 ↗
81. 10.1088/0957-0233/24/11/11510310.1088/0957-0233/24/11/115103 ↗
82. 10.1016/j.jmatprotec.2016.11.02710.1016/j.jmatprotec.2016.11.027 ↗
83. 10.1179/02670830110150998010.1179/026708301101509980 ↗
84. 10.1179/02670830110151008710.1179/026708301101510087 ↗
85. Moore P · 2017 · 1
86. 10.1016/j.jmatprotec.2017.07.02310.1016/j.jmatprotec.2017.07.023 ↗
87. Kotecki D, Armao F. Stainless steels-welding guide [Internet]. Lincoln Global Inc. Cleveland. 2003. Available from: http://www.lincolnelectric.com/assets/global/Products/Consumable_StainlessNickelandHighAlloy-BlueMax-BlueMaxMIG316LSi/c64000.pdf
88. Ji L, Lu J, Liu C, Microstructure and mechanical properties of 304L steel fabricated by arc additive manufacturing. In: Wang Y, editor. MATEC Web Conf [Internet]. 2017 Oct 25 [cited 2018 Mar 2];128:3006. Available from: http://www.matec-conferences.org/10.1051/matecconf/20171280300610.1051/matecconf/201712803006 ↗
89. 10.1016/j.jmatprotec.2017.02.01910.1016/j.jmatprotec.2017.02.019 ↗
90. Wiktorowicz R, Melton G. Shielding gas selection for controlled dip transfer (short arc) welding. TWI Bull.
91. Consonni M. · 2018
92. Melfi T. · 2010
93. 10.1179/174329306X12088610.1179/174329306X120886 ↗
94. 10.1016/j.jmatprotec.2010.11.00510.1016/j.jmatprotec.2010.11.005 ↗
95. 10.1016/j.jallcom.2015.10.16610.1016/j.jallcom.2015.10.166 ↗
96. 10.1016/j.matdes.2013.12.06010.1016/j.matdes.2013.12.060 ↗
97. 10.1179/1362171815Y.000000001710.1179/1362171815Y.0000000017 ↗
98. 10.1016/j.matdes.2013.08.01810.1016/j.matdes.2013.08.018 ↗
99. 10.1016/j.jmatprotec.2004.01.05810.1016/j.jmatprotec.2004.01.058 ↗
100. Gu J · 2014 · 4