journal article·2001-01

Precipitation in creep resistant austenitic stainless steels

T. Sourmail

Materials Science and Technology· Volume 17· Issue 1
Publisher page

Abstract

Austenitic stainless steels have for some time been used as superheater tubes in the electricity generation industries in harsh environments with temperatures as high as 650°C at pressures of some 200 atm; they are expected to provide reliable service for 30 years or more. Their detailed mechanical properties are dependent on the stability of the microstructure, particularly the formation, dissolution, and coarsening of precipitates. Although the precipitation processes have been studied extensively, there remain important discrepancies. It is known that small changes in the chemical composition or thermomechanical processing can profoundly influence the evolution of the microstructure. This review focuses on precipitation in creep resistant austenitic stainless steels, in particular wrought heat resistant grades containing niobium and titanium additions. Conventional alloys such as 18–8 and 16–10 are included together with the new NF709 (20–25) and other recent variants. Precipitates forming in age hardening austenitic stainless steels are only briefly presented. Many studies have shown that MX is not a stoichiometric phase, and that chromium can be incorporated in the metal sublattice. Furthermore, the reported compositions show considerable variation. These studies are assessed and an explanation is offered, in terms of the Gibbs–Thompson effect, for the variation. A rational consideration of all the results suggests a size dependence in line with capillarity considerations. The MX phase does not form in isolation; its stability also depends on the formation of M23C6. The literature reveals that NbC is more stable than M23C6 but the case for TiC is less certain. The formation of Z phase in nitrogen bearing steels is a further complicating factor, and it is concluded that its formation is not adequately understood. This is unlike the case for M23C6, where there is consistent reporting in the literature. Finally, work on the M6C carbide in austenitic stainless steels is critically assessed. It is found that its detailed composition is not well characterised and that there are no general rules apparent about its formation. The review also covers intermetallic compounds such as σ phase. It is clear that chromium concentrations in excess of 18 wt-%, combined with a low carbon concentration, promote the formation of σ phase. This has implications particularly for steels containing niobium and titanium, both of which getter carbon. Other compounds reviewed include χ and G phases, which form at high temperatures and during very long aging such as that encountered in service.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. F. B. PICKERING: in 'Stainless steels 84', 2–28; 1985, London, The Institute of Metals.
2. P. LACOMBE, B. BAROUX, and G. BERANGER (ed.): 'Stainless steels' 1993, Les Ulis, France, Editions de Physique.
3. P. MARSHALL: `Austenitic stainless steels, microstructure and mechanical properties'; 1984, London, Elsevier.
4. J. R. DAVIS (ed.): 'Metals handbook', 10th edn, Vol. 1; 1990, Materials Park, OH, ASM International.
5. D. J. NAYLOR and W. T. cooK: 'Materials science and technology', Vol. 7; 1992, New York, VCH Publishers.
6. V. G. GAVRILJUK and H. BERNS: 'High nitrogen steels'; 1999, Berlin, Springer-Verlag.10.1007/978-3-662-03760-7 ↗
7. M. KIKUCHI, M. SAKABIBARA, Y. OTOGURO, M. MIMURA, T. TAKAHASHI, and T. FUJITA: Proc. Int. Conf. on 'Creep', Tokyo, Japan, April 1986, 215–220; 1986, Tokyo, Japan Society of Mechanical Engineers.
8. 10.1179/mst.1988.4.4.32410.1179/mst.1988.4.4.324 ↗
9. 10.1016/0921-5093(91)90757-E10.1016/0921-5093(91)90757-E ↗
10. zou H. · Metall Trans. A, 1992, 23A · 651
11. HUGHES H. · J. Iron Steel Inst · 1967 · 205 · 775
12. 10.1007/BF0055232910.1007/BF00552329 ↗
13. 10.1179/03063457679043138110.1179/030634576790431381 ↗
14. s. R. KEOWN and F. B. PICKERING: in 'Creep strength in steel and high-temperature alloys', 134–143; 1974, London, The Metals Society.
15. ADAMSON J. M. · J. Iron Steel Inst · 1972 · 210 · 271
16. JACK D. H. · J. Iron Steel Inst · 1972 · 210 · 790
17. 10.1016/0956-716X(91)90089-J10.1016/0956-716X(91)90089-J ↗
18. RAGHAVAN A. · Metall Trans. A · 1992 · 23 · 245510.1007/BF02658049 ↗
19. P. W. ROBINSON and D. H. JACK: 'New developments in stainless steel technology', (ed. R. Lula), 71–76; 1985, Metals Park, OH, American Society for Metals.
20. V. VODAREK: in 'Applications of stainless steels '92', (ed. H. Nordberg and J. Björklund) Vol. 1, 123–132; 1992, Materials Park, OH, ASM International.
21. 10.1179/msc.1982.16.4.18410.1179/msc.1982.16.4.184 ↗
22. 10.1179/msc.1977.11.4.11710.1179/msc.1977.11.4.117 ↗
23. 10.5006/1.331596210.5006/1.3315962 ↗
24. 10.1016/0001-6160(67)90159-910.1016/0001-6160(67)90159-9 ↗
25. 10.1016/0001-6160(65)90053-210.1016/0001-6160(65)90053-2 ↗
26. T. SOURMAIL and H. K. D. H. BHADESHIA: Unpublished work, University of Cambridge, UK.
27. 10.1016/S0921-5093(97)00360-210.1016/S0921-5093(97)00360-2 ↗
28. 10.1016/0001-6160(67)90134-410.1016/0001-6160(67)90134-4 ↗
29. 10.1007/BF0274409010.1007/BF02744090 ↗
30. 10.1023/A:101864361749110.1023/A:1018643617491 ↗
31. PHILBERT J. · MeM. Sci. Rev. Métall · 1961 · 58 · 55710.1051/metal/196158070557 ↗
32. CASSA C. D. · J. Iron Steel Inst · 1969 · 207 · 1003
33. 10.2355/isijinternational.32.29110.2355/isijinternational.32.291 ↗
34. 10.1016/0079-6425(96)00002-310.1016/0079-6425(96)00002-3 ↗
35. 10.1016/S0921-5093(99)00232-410.1016/S0921-5093(99)00232-4 ↗
36. 10.1016/0025-5416(83)90191-X10.1016/0025-5416(83)90191-X ↗
37. DEIGHTON M. · J. Iron Steel Inst · 1970 · 208 · 1012— 1014
38. DEGALAIX S. · MeM. EtUd. Sci. Rev. MétalL · 1987 · 84 · 645
39. 10.1007/BF0264235110.1007/BF02642351 ↗
40. THIER H. · Arch. Eisenhiit-tenwes · 1969 · 40 · 333
41. 10.1179/mst.1986.2.8.79510.1179/mst.1986.2.8.795 ↗
42. 10.1179/03063458079042600310.1179/030634580790426003 ↗
43. T. THORVALDSSON and G. L. DUNLOP: Proc. Int. Conf. on 'The strength of metals and alloys', Aachen, Germany, August 1979, 755–760; 1979, Oxford, Pergamon.10.1016/B978-1-4832-8412-5.50128-4 ↗
44. 10.1007/BF0316182710.1007/BF03161827 ↗
45. J. BENTLEY and J. M. LEITNAKER: in 'The metal science of stainless steels', (ed. E. W. Collings and H. W. King.), 70–91; 1978, Warrendale, PA, TMS-AIME.
46. 10.1179/mst.1985.1.2.9710.1179/mst.1985.1.2.97 ↗
47. H. H. STADELMAIER: in 'Development in the structural chemistry of alloy phases', 141–180; 1969, New York, Plenum Press.10.1007/978-1-4899-5564-7_6 ↗
48. 10.1007/BF0264765910.1007/BF02647659 ↗
49. 10.1016/0022-3115(81)90449-910.1016/0022-3115(81)90449-9 ↗
50. T. M. WILLIAMS: in 'Stainless steels 84', 403–412; 1985, London, The Institute of Metals.
51. J. M. TITCHMARSH and T. M. WILLIAMS: in 'Quantitative microanalysis with high spatial resolution', (ed. G. W. Lorimer et al), 223–228; 1981, London, The Institute of Metals.
52. 10.1016/0956-716X(93)90489-F10.1016/0956-716X(93)90489-F ↗
53. 10.1179/03063457879043406110.1179/030634578790434061 ↗
54. 10.1007/BF0264377910.1007/BF02643779 ↗
55. 10.1007/BF0054275010.1007/BF00542750 ↗
56. JARGELIUS-PETTERSON R. F. A. · Z. Metallkd · 1998 · 79 · 177
57. 10.1016/0001-6160(88)90105-810.1016/0001-6160(88)90105-8 ↗
58. Y. MINAMI, H. KIMURA, and M. TANIMURA: in 'New developments in stainless steel technology', (ed. R. Lula), 231–242; 1985, Metals Park, OH, American Society for Metals.
59. SUMERLING R. · J. Iron Steel Inst · 1965 · 203 · 398
60. RAMASWAMY V. · J. Iron Steel Inst · 1970 · 208 · 391
61. 10.1016/0022-3115(81)90403-710.1016/0022-3115(81)90403-7 ↗
62. D. J. POWELL, R. PILKINGTON, and D. A. MILLER: in 'Stainless steels 84', 382–390; 1985, London, The Institute of Metals.
63. 10.1007/BF0108648410.1007/BF01086484 ↗
64. 10.1179/mst.1988.4.1.510.1179/mst.1988.4.1.5 ↗
65. WOODYATT L. R. · Trans. AIME · 1966 · 236 · 519
66. DENHAM A. W. · J. Iron Steel Inst · 1969 · 207 · 585— 592
67. 10.1016/0025-5416(83)90046-010.1016/0025-5416(83)90046-0 ↗
68. 10.1016/0026-0800(70)90004-210.1016/0026-0800(70)90004-2 ↗
69. BEATTIE H. J. · J. Met · 1957 · 911
70. 10.1038/178208b010.1038/178208b0 ↗
71. DEWEY R. A. P. · J. Iron Steel Inst · 1965 · 203 · 938
72. F. B. PICKERING: in 'The metallurgical evolution of stainless steels', (ed. F. B. Pickering), 391–401; London, 1979, The Metals Society.
73. SATYANARAYANA D. V. V. · Trans. Indian Inst. Met · 1996 · 49 · 419
74. E. J. DULIS: in 'The metallurgical evolution of stainless steels', (ed. F. B. Pickering), 420–441; 1979, London, The Metals Society.
75. A. TOHYAMA and Y. MINAMI: in 'Advanced heat resistant steels for power generation', (ed. R. Viswanathan and J. Nutting), 494–506; 1999, London, IoM Communications Ltd.
76. 10.1016/0001-6160(72)90122-810.1016/0001-6160(72)90122-8 ↗