journal article·2026-11Open access

Crack-resistant vertically aligned graphene film thermal Interface materials enabled by oriented pre-bending for low thermal resistance

Renqiang Fang, Xiaoxi Xu, Ziran Zhang, Huaqiang Fu, Zhe Wang, Daping He

Abstract

Efficient thermal management under low assembly pressure requires thermal interface materials (TIMs) that combine continuous through-plane heat-flow pathways, low contact resistance, and resistance to compression-induced cracking. Here, we report an oriented pre-bending strategy for constructing crack-resistant vertically aligned graphene film (VGF) TIMs. In this architecture, graphene foam lamellae are directionally pre-bent and fixed within an epoxy matrix, forming a compliant vertical network with a built-in deformation allowance before device assembly. The VGF TIMs contain 77.42 wt% graphene and exhibit a through-plane thermal conductivity of 143.54 W m −1 K −1 . The pre-bent lamellar framework also maintains a low contact thermal resistance of 16.6–25.8 mm 2 K W −1 over 10–100 psi by improving surface conformity and suppressing local stress concentration. Finite-element simulations show that, compared with a randomly deformed wavy vertical lamellar structure, the oriented pre-bent architecture suppresses uncontrolled deformation and redistributes compressive stress along preset bent pathways, thereby mitigating bending-induced fracture. Under the same liquid-cooling conditions, VGF TIMs exhibited superior device-level thermal management performance, reducing the steady-state heater temperature to approximately 47 °C at 40 W cm −2 , which is 71 °C lower than the case without TIM and 35 °C lower than the commercial thermal pad. This work establishes oriented pre-bending as a structural design strategy for combining high thermal conductivity, crack-resistant compliance, and low thermal resistance in graphene-based TIMs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Thermal properties of materials · Graphene research and applications · Composite Material Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Thermal conductivity of carbon nanotubes and their polymer nanocomposites: a review10.1016/j.progpolymsci.2010.11.004 ↗
2. Rheological behavior and thermal conductivities of emulsion-based thermal pastes10.1007/s11664-019-07907-y ↗
3. Exceptionally high thermal conductivity of thermal grease: synergistic effects of graphene and alumina10.1016/j.ijthermalsci.2015.01.006 ↗
4. Sea anemone-inspired phase change composites for efficient heat dissipation and ultra-high electromagnetic interference shielding10.34133/research.1075 ↗
5. Ghosh · 2010
6. Phonon thermal conductivity of graphene10.1016/j.spmi.2015.09.027 ↗
7. A state of review for graphene-based materials in preparation methods, characterization, and properties10.1016/j.mseb.2024.117698 ↗
8. Thermal conductivity above 2,000 W m−1 K−1 in boron arsenide by nanosecond transducer-less time-domain thermoreflectance10.34133/research.0971 ↗
9. Thermal conductivity of defective graphene10.1016/j.physleta.2012.10.048 ↗
10. Thermal Conductivity of Graphene and Graphene Oxide Nanoplatelets
11. Thermal conductivity of graphene laminate10.1021/nl501996v ↗
12. A comprehensive experimental study regarding size dependence on thermal conductivity of graphene oxide nanosheet10.1016/j.icheatmasstransfer.2021.105764 ↗
13. Thermal conductivity of graphene-based polymer nanocomposites10.1016/j.mser.2020.100577 ↗
14. Application-driven high-thermal-conductivity polymer nanocomposites10.1021/acsnano.3c08467 ↗
15. Thermal conductivity of graphene-polymer composites: implications for thermal management10.1007/s00231-020-02821-0 ↗
16. Heat transfer enhanced phase change microcapsule with graphene for battery thermal management10.1016/j.mseb.2025.117979 ↗
17. Study on the interface properties and thermal conductivity of graphene/silicone rubber composites with structural defects and surface modifications10.1016/j.mseb.2025.118266 ↗
18. Constructing "flake-ball" network architectures via facile strategies for enhanced thermal conductivity in polyurethane composites10.1016/j.mseb.2025.118799 ↗
19. Structural, morphological, optical, and thermal properties of Mg-doped ZnO thin film nanostructures on Al substrates as thin film heat spreader for thermal management applications10.1016/j.mseb.2025.118898 ↗
20. Interfacial welding of graphene thick films via surface pre-oxidation for enhanced thermal conductivity retention10.1016/j.mseb.2026.119628 ↗
21. Thermal properties of the binary-filler hybrid composites with graphene and copper nanoparticles10.1002/adfm.201904008 ↗
22. Thermally conductive and electrically insulated silicone rubber composites incorporated with boron nitride-multilayer graphene hybrid nanofiller10.3390/nano12142335 ↗
23. Soft and self-adhesive thermal interface materials based on vertically aligned, covalently bonded graphene nanowalls for efficient microelectronic cooling10.1002/adfm.202104062 ↗
24. High-performance thermal interface materials enabled by vertical alignment of lightweight and soft graphene foams10.1007/s12274-024-6985-7 ↗
25. Cholesteric cellulose liquid crystal fibers by direct drawing10.34133/research.0527 ↗
26. 3D lamellar-structured graphene aerogels for thermal interface composites with high through-plane thermal conductivity and fracture toughness10.1007/s40820-020-00548-5 ↗
27. Vertically aligned high-quality graphene foams for anisotropically conductive polymer composites with ultrahigh through-plane thermal conductivities10.1021/acsami.8b04230 ↗
28. Thermally conductive graphene-polymer composites: size, percolation, and synergy effects10.1021/cm504550e ↗
29. Synergistic effect of aligned graphene nanosheets in graphene foam for high-performance thermally conductive composites
30. Graphene woven fabric-reinforced polyimide films with enhanced and anisotropic thermal conductivity10.1016/j.compositesa.2016.05.010 ↗
31. Advanced phase change composite by thermally annealed defect-free graphene for thermal energy storage10.1021/am503619a ↗
32. Vertically aligned, ultralight and highly compressive all-graphitized graphene aerogels for highly thermally conductive polymer composites10.1016/j.carbon.2018.09.016 ↗
33. High-quality graphene aerogels for thermally conductive phase change composites with excellent shape stability10.1039/C8TA00078F ↗
34. Hybrid graphene aerogels/phase change material composites: thermal conductivity, shape-stabilization and light-to-thermal energy storage10.1016/j.carbon.2016.01.063 ↗
35. High-density 3D-boron nitride and 3D-graphene for high-performance nano-thermal interface material10.1021/acsnano.6b08218 ↗
36. Chloroform-assisted rapid growth of vertical graphene array and its application in thermal interface materials
37. Scalable compliant graphene fiber-based thermal interface material with metal-level thermal conductivity via dual-field synergistic alignment engineering10.1021/acsnano.4c04349 ↗
38. et al.Thermal interface materials with both high through-plane thermal conductivity and excellent elastic compliance10.1021/acs.chemmater.1c03275 ↗
39. Low thermal contact resistance boron nitride nanosheets composites enabled by interfacial arc-like phonon bridge10.1038/s41467-024-47147-1 ↗
40. Multifunctional thermally conductive composite films based on fungal tree-like heterostructured silver nanowires@boron nitride nanosheets and aramid nanofibers
41. Elastomeric thermal interface materials with high through-plane thermal conductivity from carbon fiber fillers vertically aligned by electrostatic flocking10.1002/adma.201401736 ↗
42. Fully organic bulk polymer with metallic thermal conductivity and tunable thermal pathways10.1002/advs.202004821 ↗
43. A paper-like inorganic thermal interface material composed of hierarchically structured graphene/silicon carbide nanorods