Optimized reaction kinetics and stability for layer-structured LiNi0.83Co0.06Mn0.11O2 cathode material through interface modification
Source abstract
Abstract
High-voltage nickel-rich layered oxides (i.e. LiNi0.83Co0.06Mn0.11O2, NCM83) are considered to be one of the most promising cathode materials for new energy vehicles, due to its high volumetric energy density and low cost. However, the voltage rapid decay and structural degradation at high operating voltage still plague its practical application, caused by undesired transition metal dissolution and lattice oxygen loss. The dissolution and oxidation processes of transition metal based Li₂CO₃ are investigated by the various ex-situ measurements to understand the transformation and protective mechanism of NCM83. The results demonstrate that the disproportionation reaction of surface Ni3+ and the Ni/Li antisite defects can be effectively blocked by the protective additive of L2CO3. As an additive, the L2CO3 can suppress the Mn2+ dissolution and Ni⁴⁺ oxidation during charging process, thereby decreasing the release of lattice oxygen and side reactions between the electrolyte and the cathode materials. The ex-situ EIS and ex-situ XPS results demonstrate that the L2CO3 also can optimize the interface charge transfer and Li+ diffusion kinetics during charge/discharge processes, thereby stabilizing the electrode interface structure and forming homogeneous cathode-electrolyte interphase (CEI). The NCM83 sample with 4 wt% Li₂CO₃ (NCM83@L2CO3-4) delivers a high reversible capacity of 97.1 mAh g⁻¹ after 1000 cycles with a capacity retention rate of 77.6%, indicating significant long-term cycling stability. Even at high active loading of 7 mg cm-2, the NCM83@L2CO3-4 electrodes still demonstrate higher capacities and much better cycling stability than that of the pristine NCM83 electrode at 1C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Maximizing energy density of lithium-ion batteries for electric vehicles: a critical review10.1016/j.egyr.2023.08.069 ↗
2. Thermal explosion energy evaluation on LCO and NCM Li-ion polymer batteries using thermal analysis methodology10.1016/j.psep.2023.06.093 ↗
3. Advances and industrialization of LiFePO₄ cathodes in electric vehicles: challenges, innovations, and future directions10.1039/D5TA00166H ↗
4. Tuning the cathode-electrolyte interphase chemistry with multifunctional additive for high-voltage Li-ion batteries10.1002/smll.202305464 ↗
5. Recent progress and perspective of advanced high-energy co-less Ni-rich cathodes for Li-ion batteries: yesterday, today, and tomorrow10.1002/aenm.202002027 ↗
6. Boron in Ni-rich NCM811 cathode material: impact on atomic and microscale properties10.1021/acsaem.1c03000 ↗
7. A bimetal strategy for suppressing oxygen release of 4.6V high-voltage single-crystal high-nickel cathode
8. Enabling the Nb/Ti co-doping strategy for improving structure stability and rate capability of Ni-rich cathode10.1016/j.cclet.2024.110040 ↗
9. Synergistic doping chemistry enable the cycling properties of single-crystal Ni-rich cathode for lithium-ion batteries10.1016/j.apsusc.2024.161839 ↗
10. An effective co-modification strategy to enhance the cycle stability of LiNi0.8Co0.1Mn0.1O2 for lithium-ion batteries10.1039/D3RA04145J ↗
11. Electrochemical performance of LBO-coated Ni-rich NCM cathode material: experimental and numerical approaches10.1149/1945-7111/aca2e1 ↗
12. Enhancing the electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathodes through amorphous coatings10.1016/j.electacta.2022.140745 ↗
13. Subnano Al2O3 coatings for kinetics and stability optimization of LiNi0.83Co0.12Mn0.05O2 via O3-based atomic layer deposition10.1021/acsami.4c15078 ↗
14. An air-stable high-nickel cathode with reinforced electrochemical performance enabled by convertible amorphous Li2CO3 modification10.1002/adma.202108947 ↗
15. External Li supply reshapes Li deficiency and lifetime limit of batteries10.1038/s41586-024-08465-y ↗
16. A high-energy-density and long-life initial-anode-free lithium battery enabled by a Li2O sacrificial agent10.1038/s41560-021-00839-0 ↗
17. Lattice engineering on Li2CO3-based sacrificial cathode prelithiation agent for improving the energy density of Li-ion battery full-cell
18. Reactions in the rechargeable lithium-O2 battery with alkyl carbonate electrolytes10.1021/ja2021747 ↗
19. Interfacial anchoring of manganese boosting cycle stability of LiMn0.6Fe0.4PO4 cathode for lithium-ion battery10.1016/j.elecom.2026.108189 ↗
20. Jeyakumar · J. Energy Storage · 2024 · 8710.1016/j.est.2024.111438 ↗
21. Z.W. Wu, Y. Zhou, C.X. Hai, J.B. Zeng, X.F. Ren, Y.X. Sun, Y. Shen, X. Li, S.D. Dong, G.T. Zhang, Improving electrochemical performance of NCM811 cathodes for lithium-ion batteries via consistently arranging the hexagonal nanosheets with exposed {104} facets, Ceram. Int. 48 (2022) 17279–17288.10.1016/j.ceramint.2022.02.289 ↗
22. Effects of cation ordering in concentration-gradient NCM811 structures from first-principles calculations10.1021/acsaem.4c00470 ↗
23. Highly selective glycerol electrooxidation assisted hybrid water electrolysis using a trifunctional heterojunction CoP/(Fe0.25Co0.75)3N catalyst
24. Heterostructure CoP2-Fe2P//CoWO4 as a pH-universal and multifunctional catalyst for efficient hydrogen evolution and ethanol oxidation10.1016/j.jcis.2026.140508 ↗
25. Multifunctional active-center-transferable platinum/Lithium cobalt oxide Heterostructured Electrocatalysts towards superior water splitting10.1002/anie.202005241 ↗
26. First-principles modeling of Mn(II) migration above and dissolution from LixMn2O4 (001) surfaces10.1021/acs.chemmater.6b04429 ↗
27. Operando characterization and regulation of metal dissolution and redeposition dynamics near battery electrode surface10.1038/s41565-023-01367-6 ↗
28. On the oxidation state of manganese ions in Li-ion battery electrolyte solutions10.1021/jacs.6b10781 ↗
29. Speciation of transition metal dissolution in electrolyte from common cathode materials10.1002/anie.202317109 ↗
30. Controllable engineering of new ZnAl2O4-decorated LiNi0.8Mn0.1Co0.1O2 cathode materials for high performance lithium-ion batteries10.1016/j.jmrt.2023.01.102 ↗
31. Application of electrochemical impedance spectroscopy to degradation and aging research of lithium-ion batteries10.1021/acs.jpcc.3c00033 ↗
32. A review on the distribution of relaxation times analysis: a powerful tool for process identification of electrochemical systems10.1016/j.jpowsour.2023.233845 ↗
33. Fluorination from surface to bulk stabilizing high nickel cathode materials with outstanding electrochemical performance
34. Separation of predominant processes in electrochemical impedance spectra of lithium-ion batteries with nickel-manganese-cobalt cathodes10.1016/j.jpowsour.2019.03.068 ↗
35. The timescale identification decoupling complicated kinetic processes in lithium batteries10.1016/j.joule.2022.05.005 ↗
36. Electrochemical assessment of a Li-ion full cell with cathode-anode impedance separation via in-situ EIS-DRT and three-electrode configuration10.1016/j.jpowsour.2024.236115 ↗
37. Nano-ordered structure regulation in delithiated Si anode triggered by homogeneous and stable Li-ion diffusion at the interface10.1016/j.nanoen.2020.104651 ↗
38. Lattice-compatible piezoelectric modification for suppressing lattice oxygen evolution of Ni-rich cathode materials at high cut-off voltage
39. The nature of irreversible phase transformation propagation in nickel-rich layered cathode for lithium-ion batteries10.1016/j.jechem.2021.03.035 ↗
40. Effect of the oxygen vacancy electronic state on Ni migration in Li0.5(Ni0.8Mn0.1Co0.1)O2 cathode material10.1039/D3CP03396A ↗
41. Atomic to nanoscale investigation of functionalities of an Al2O3 coating layer on a cathode for enhanced battery performance10.1021/acs.chemmater.5b04301 ↗
42. First-principles study of the structures and redox mechanisms of Ni-rich lithium nickel manganese cobalt oxides10.1016/j.ssi.2024.116556 ↗
43. Preferential sputtering effects in depth profiling of multilayers with SIMS, XPS and AES10.1016/j.apsusc.2019.03.211 ↗
44. Stabilizing lattice oxygen in slightly Li-enriched nickel oxide cathodes toward high-energy batteries10.1016/j.chempr.2022.07.023 ↗
45. H. Ma, S.J. Cai, R. Song, K.X. Jing, M. Wu, W.Z. Wang, Y.R. Ren, Q. Zhao, Z.P. Ding, Evolution of interfacial electro-chemo-mechanics in high-energy-density NCM811||Si/C-composite lithium-ion pouch cells, Chem. Eng. J. 511 (2025) 162081.10.1016/j.cej.2025.162081 ↗
46. In situ construction of gradient oxygen release buffer and interface cation self-accelerator stabilizing high-voltage Ni-rich cathode10.1002/adfm.202206428 ↗
47. Restraining the octahedron collapse in lithium and manganese rich NCM cathode toward suppressing structure transformation10.1002/aenm.202201323 ↗
48. The oxygen vacancy in Li-ion battery cathode materials10.1039/D0NH00340A ↗
49. Dual modification of LiNi0.83Co0.11Mn0.06O2 cathode materials by K+ doping and Li3PO4 coating for lithium ions batteries10.1007/s12598-024-02692-y ↗
50. Nanostructured LiNi0.8Co0.1Mn0.1O2 with a hollow morphology boosting cycling stability as cathode materials for lithium-ion batteries10.1021/acsanm.4c01979 ↗
51. Realizing dual functions through Y2O3 modification to enhance the electrochemical performance of LiNi0.8Co0.1Mn0.1O2 material10.3390/coatings14040443 ↗
52. TiO2 nanoparticles assisted LiNbO3-coated LiNi0.8Co0.1Mn0.1O2 cathode for lithium-ion batteries10.1021/acsanm.3c04931 ↗
53. Aluminum metaphosphate-derived CEI suppresses interfacial degradation of NCM811 at 4.5 V and 60°C10.1016/j.elecom.2026.108114 ↗
54. Enhanced electrochemical performance of polycrystalline NCM811 cathode at high voltage through Te-doped LiNbO3 coating for lithium-ion batteries10.1016/j.nxener.2024.100216 ↗
55. Damage mechanisms and recent research advances in Ni-rich layered cathode materials for lithium-ion batteries10.1002/elt2.27 ↗