Distinguishing the contribution of electrochemistry and thermochemistry in the CO2/H2O co-electrolysis process of solid oxide cells
Source abstract
Abstract
In this study, a high-sealing-performance electrolysis stack was designed to conduct comparative experiments with different gas compositions and quantitative analysis of tail gas. The aim was to investigate the quantitative contributions of electrochemical and thermochemical reactions during CO 2 /H 2 O co-electrolysis in a solid oxide electrolysis cell (SOEC) stack. The results show that, in the presence of hydrogen as a protective gas, the electrochemical contribution to CO 2 reduction becomes increasingly dominant with higher electrolysis current density, while the thermochemical contribution gradually decreases. Under these conditions, the electrochemical contribution exceeds 90%, while the thermochemical contribution dropping to below 10%. Under the condition of no reducing gas, H 2 O electrolysis dominates the co-electrolysis process, and the electron distribution ratio is approximately 55%–69% for H 2 O electrolysis and 31%–45% for CO 2 electrolysis.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Chemical Looping and Thermochemical Processes · Molten salt chemistry and electrochemical processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Hierarchical modeling of solid oxide cells and stacks producing syngas via H2O/CO2 CO-electrolysis for industrial applications10.1016/j.apenergy.2018.08.122 ↗
2. Recent advances in solid oxide cell technology for electrolysis10.1126/science.aba6118 ↗
3. Superior syngas product control of La(Sr)Fe(Mn)O3 perovskite in high-temperature CO2/H2O CO-electrolysis
4. High temperature solid oxide H2O/CO2 CO-electrolysis for syngas production10.1016/j.fuproc.2016.08.009 ↗
5. Performance optimization of solid oxide electrolysis cell for syngas production by high temperature co-electrolysis via differential evolution algorithm with practical constraints10.1016/j.enconman.2023.117911 ↗
6. Hydrodynamic effects on the direct conversion of syngas to methyl acetate in a two-stage fixed-bed/fluidized-bed combined reactor
7. Efficient syngas generation for electricity storage through carbon gasification assisted solid oxide co-electrolysis10.1016/j.apenergy.2016.03.116 ↗
8. Production of syngas with controllable H2/CO ratio by high temperature co-electrolysis of CO2 and H2O over Ni and CO- doped lanthanum strontium ferrite perovskite cathodes10.1016/j.apcatb.2019.02.045 ↗
9. Design of Cobalt Fischer–Tropsch Catalysts for the Combined Production of Liquid Fuels and Olefin Chemicals from Hydrogen-Rich Syngas10.1021/acscatal.0c05027 ↗
10. Modeling and optimization of a novel power-to-methanol system based on Soec CO2/H2O CO-electrolysis10.1016/j.apenergy.2025.126227 ↗
11. Electrocatalysts for the generation of hydrogen, oxygen and synthesis gas10.1016/j.pecs.2016.09.001 ↗
12. Interface engineering of La0.6Sr0.4Co0.2Fe0.8O3−δ/Gd0.1Ce0.9O1.95 heterostructure oxygen electrode for solid oxide electrolysis cells with enhanced CO2 electrolysis performance10.1016/j.cej.2024.155461 ↗
13. A durable and highly active oxygen electrode for solid oxide cells: new insight into segregation suppression of layered perovskite10.1002/adma.202502068 ↗
14. A stable high-entropy perovskite La0.2Pr0.2Nd0.2Sm0.2Sr0.2Co0.8Fe0.2O3-δ oxygen electrode for reversible solid oxide cells10.1016/j.mseb.2024.117857 ↗
15. Power-to-syngas: an enabling Technology for the Transition of the energy system?10.1002/anie.201607552 ↗
16. Syngas production in high performing tubular solid oxide cells by using high-temperature H2O/CO2 co-electrolysis10.1016/j.cej.2017.10.110 ↗
17. Planer type solid oxide cells using La0.9Sr0.1Ga0.8Mg0.2O3-δ thin-film electrolyte prepared by dip-coating method for high performance CO2/H2O co-electrolysis10.1016/j.apcata.2025.120146 ↗
18. Different performance and mechanisms of CO2 electrolysis with CO and H2 as protective gases in solid oxide electrolysis cell10.1016/j.ijhydene.2022.04.061 ↗
19. A brief review of high-entropy oxides in solid oxide fuel cell applications10.1016/j.mseb.2026.119260 ↗
20. Reactions and mass transport in high temperature co-electrolysis of steam/CO2 mixtures for syngas production10.1016/j.jpowsour.2015.01.083 ↗
21. CO2 / H2O CO-electrolysis using single and stack solid oxide electrolysis cell (SOEC)10.1016/j.electacta.2025.146535 ↗
22. Revealing the reaction mechanism of CO2 /H2O Coelectrolysis on perovskite-based cathode materials10.1021/acs.energyfuels.3c03312 ↗
23. Reduced gas diffusion resistance via modification of negatrode morphology for steam/CO2 CO-electrolysis SOEC10.1016/j.elecom.2025.108022 ↗
24. Long-term electrochemical characterization of novel Sr2FeMo0.65Ni0.35O6−δ fuel electrode for high-temperature steam electrolysis in solid oxide cells10.1016/j.elecom.2024.107799 ↗
25. Investigation on the reaction mechanism of solid oxide co-electrolysis with different inlet mixtures based on the comparison of CO2 electrolysis and H2O electrolysis10.1016/j.enconman.2022.116621 ↗
26. Understanding the occurrence of the individual CO2 electrolysis during H2O-CO2 co-electrolysis in classic planar Ni-YSZ/YSZ/LSM-YSZ solid oxide cells10.1016/j.electacta.2019.06.108 ↗
27. Boundary investigation of high-temperature CO-electrolysis towards direct CO2 electrolysis10.1149/1945-7111/ac5e45 ↗
28. Performance of CO2/H2O CO-electrolysis in a flat-tube solid oxide electrolysis cell stack under air-free environment10.61558/2993-074X.3518 ↗
29. Toward high CO selectivity and oxidation resistance solid oxide electrolysis cell with high-entropy alloy10.1021/acscatal.3c05972 ↗