Structurally stable porous Si-C composite from nanoparticulate Si, phenolic resin derived hard carbon, and sacrificial SiO2 for Li-ion battery anode
Source abstract
Abstract
Silicon is considered as the promising anode material for lithium-ion batteries due to its high theoretical capacity. However, its commercialization is hindered due to the high volumetric change, up to 400%, upon lithiation and delithiation that destroys the anode architecture on cycling. This work focuses on the development of a Si-C composite as high-performance anode material for lithium-ion batteries using silicon nanoparticles, phenolic resin-derived carbon, and colloidal SiO2 as a pore forming agent. This design simultaneous control the carbon content and pore structure to effectively mitigate the volume expansion of silicon during cycling. Structural characterization such as XRD, Raman, XPS, TGA were employed to study the structural phases evolving in the Si-C composite, which confirms the presence of nanocrystalline Si embedded in an encapsulating carbon phase. Microscopic studies using FE-SEM and TEM demonstrated a uniformly distributed porous morphology containing Si that improves electrolyte accessibility and maintains structural integrity. Nitrogen based BET measurements confirms the presence of largely mesoporosity originating from the removal of SiO2. As a result, the optimum Si-C microstructure was able to deliver a high reversible capacity of ~717 mAh g-1 after 400 cycles at 100 mA g-1 retaining over 77% of its initial capacity. Also, the optimum Si-C composite delivers 554 mAh g-1 over 100 cycles at a higher current density of 1 Ag-1, further, at a still higher current density of 2 A g-1, the composite delivers an average capacity of 498 mAh g-1. The overall improved electrochemical performance with enhanced rate capability and reduced charge-transfer resistance highlight the critical role of the colloidal SiO2 as a pore forming agent and the porous conductive carbon network in stabilizing the Si based anode systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advancements in Battery Materials · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Lithium-ion secondary batteries; past 10 years and the future10.1016/S0378-7753(01)00887-4 ↗
2. Electrical energy storage for transportation—approaching the limits of, and going beyond, lithium-ion batteries10.1039/c2ee21892e ↗
3. J. Asenbauer, T. Eisenmann, M. Kuenzel, A. Kazzazi, Z. Chen, D. Bresser, The success story of graphite as a lithium-ion anode material – fundamentals, remaining challenges, and recent developments including silicon (oxide) composites, sustain. Energy Fuel 4 (2020) 5387–5416. doi:https://doi.org/10.1039/D0SE00175A.10.1039/D0SE00175A ↗
4. T.D. Bogart, A.M. Chockla, B.A. Korgel, High-capacity lithium ion battery anodes of silicon and germanium, Curr. Opin. Chem. Eng. 2 (2013) 286–293. doi:https://doi.org/10.1016/j.coche.2013.07.001.10.1016/j.coche.2013.07.001 ↗
5. Nanoscale silicon as anode for Li-ion batteries: the fundamentals, promises, and challenges10.1016/j.nanoen.2015.08.025 ↗
6. Overcoming challenges in silicon anodes: the role of electrolyte additives and solid-state electrolytes10.3390/mi16070800 ↗
7. Designing nanostructured Si anodes for high energy lithium ion batteries10.1016/j.nantod.2012.08.004 ↗
8. Scalable synthesis of pore-rich Si/C@C Core–Shell-structured microspheres for practical Long-life Lithium-ion battery anodes10.1021/acsami.1c22656 ↗
9. Hierarchical yolk-Shell silicon/carbon anode materials enhanced by vertical graphene sheets for commercial Lithium-ion battery applications
10. Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells10.1016/j.jpowsour.2006.09.084 ↗
11. L. Yang, S. Li, Y. Zhang, H. Feng, J. Li, X. Zhang, H. Guan, L. Kong, Z. Chen, Multi-scale design of silicon/carbon composite anode materials for lithium-ion batteries: a review, journal of energy Chemistry 97 (2024) 30–45. doi:https://doi.org/10.1016/j.jechem.2024.05.029.10.1016/j.jechem.2024.05.029 ↗
12. Enhancing the cycling stability of commercial silicon nanoparticles by carbon coating and thin layered single-walled carbon nanotube webbing10.1016/j.jpowsour.2024.234338 ↗
13. Mitigating volume expansion in silicon anodes: recent developments and future prospects10.1016/j.molliq.2025.128768 ↗
14. Porous carbon-coated silicon composites for high performance lithium-ion batterie anode10.1016/j.apsusc.2024.160076 ↗
15. Hard carbon anode for lithium-, sodium-, and potassium-ion batteries: advancement and future perspective
16. Disordered materials for high-performance lithium-ion batteries: a review10.1016/j.nanoen.2023.109250 ↗
17. High carbon yield thermoset resin based on phenolic resin, hyperbranched polyborate, and paraformaldehyde10.1002/pat.1806 ↗
18. Preparation, thermal stability and deflection of a density gradient thermally-conductive carbon foam material derived from phenolic resin10.1016/j.rinp.2019.102448 ↗
19. Development of the fire retardant glass fabric/carbonized phenolic composite10.1016/j.compstruct.2016.04.003 ↗
20. Z. Wu, P. Jiang, H. Pang, G. Cheng, J. Li, H. Liu, Y. Ma, Y. Dong, Z. Wang, Improving the oxidation resistance of phenolic resin pyrolytic carbons by in situ catalytic formation of carbon nanofibers via copper nitrate, Materials 17 (2024) 3770. doi:https://doi.org/10.3390/ma17153770.10.3390/ma17153770 ↗
21. J. Hwang, M. Jung, J.-J. Park, E.-K. Kim, G. Lee, K.J. Lee, J.-H. Choi, W.-J. Song, Preparation and electrochemical characterization of Si@C nanoparticles as an anode material for Lithium-ion batteries via solvent-assisted wet coating process, Nanomaterials 12 (2022) 1649. doi:https://doi.org/10.3390/nano12101649.10.3390/nano12101649 ↗
22. A self-assembled silicon/phenolic resin-based carbon core–shell nanocomposite as an anode material for lithium-ion batteries10.1039/C7RA13580G ↗
23. Synthesis and electrochemical properties of nano-Si/C composite anodes for lithium-ion batteries10.1016/S1872-5805(23)60707-3 ↗
24. Fabrication and electrochemical performance of Si-C composite nanostructures with SiO2 sacrificial agent for LIB anode10.1016/j.jallcom.2024.173766 ↗
25. A self-sacrifice template strategy to synthesize silicon@carbon with interior void space for boosting lithium storage performance10.1007/s42114-022-00528-w ↗
26. Recycled silicon-based anodes with three-dimensional hierarchical porous carbon framework synthesized by a self-assembly CaCO3 template method for lithium ion battery10.1016/j.jallcom.2020.157703 ↗
27. N. Yan, F. Wang, H. Zhong, Y. Li, Y. Wang, L. Hu, Q. Chen, Hollow porous SiO2 Nanocubes towards high-performance anodes for Lithium-ion batteries, Sci. Rep. 3 (2013) 1568. doi:https://doi.org/10.1038/srep01568.10.1038/srep01568 ↗
28. X. Sun, Y. Luo, X. Li, Y. Wang, S. Lin, W. Ding, K. Guo, K. Zhang, A. Qin, Pompon mum-like SiO2/C Nanospheres with high performance as anodes for Lithium-ion batteries, Batteries 10 (2024) 149. doi:https://doi.org/10.3390/batteries10050149.10.3390/batteries10050149 ↗
29. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
30. Raman microspectroscopy of soot and related carbonaceous materials: spectral analysis and structural information10.1016/j.carbon.2005.02.018 ↗
31. Raman spectroscopy of graphene and graphite: disorder, electron–phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
32. High lithium anodic performance of highly nitrogen-doped porous carbon prepared from a metal-organic framework10.1038/ncomms6261 ↗
33. Sustainable carbon materials10.1039/C4CS00232F ↗
34. Silicon-based nanomaterials for Lithium-ion batteries: a review10.1002/aenm.201300882 ↗
35. Watermelon-inspired Si/C microspheres with hierarchical buffer structures for densely compacted Lithium-ion battery anodes10.1002/aenm.201601481 ↗
36. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC technical report)10.1515/pac-2014-1117 ↗
37. K. Lenghaus, G. GuangHua Qiao, D.H. Solomon, C. Gomez, F. Rodriguez-Reinoso, A. Sepulveda-Escribano, Controlling carbon microporosity: the structure of carbons obtained from different phenolic resin precursors, Carbon N. Y. 40 (2002) 743–749. doi:https://doi.org/10.1016/S0008-6223(01)00194-4.10.1016/S0008-6223(01)00194-4 ↗
38. M. Wiener, G. Reichenauer, Microstructure of porous carbons derived from phenolic resin – Impact of annealing at temperatures up to 2000 °C analyzed by complementary characterization methods, Microporous Mesoporous Mater. 203 (2015) 116–122. doi:https://doi.org/10.1016/j.micromeso.2014.10.012.10.1016/j.micromeso.2014.10.012 ↗
39. Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres10.1039/C2TA00388K ↗
40. Materials for electrochemical capacitors10.1038/nmat2297 ↗
41. Phenolic resin-coated porous silicon/carbon microspheres anode materials for Lithium-ion batteries10.1007/s12633-021-01240-y ↗
42. R.A. Jones, G.M. Jenkins, 9. Volume changes in phenolic resin during carbonization, Carbon N. Y. 14 (1976) 292. doi:https://doi.org/10.1016/0008-6223(76)90142-1.10.1016/0008-6223(76)90142-1 ↗
43. Li-alloy based anode materials for Li secondary batteries10.1039/b919877f ↗
44. Multiple-bonding configurations for oxygen on silicon surfaces10.1103/PhysRevB.28.3651 ↗
45. D. Yang, A. Velamakanni, G. Bozoklu, S. Park, M. Stoller, R.D. Piner, S. Stankovich, I. Jung, D.A. Field, C.A. Ventrice, R.S. Ruoff, Chemical analysis of graphene oxide films after heat and chemical treatments by X-ray photoelectron and Micro-Raman spectroscopy, Carbon N. Y. 47 (2009) 145–152. doi:https://doi.org/10.1016/j.carbon.2008.09.045.10.1016/j.carbon.2008.09.045 ↗
46. Review—SEI: past, present and future10.1149/2.1441707jes ↗
47. Interconnected silicon hollow Nanospheres for Lithium-ion battery anodes with Long cycle life10.1021/nl201470j ↗
48. A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes10.1038/nnano.2014.6 ↗
49. 25th anniversary article: understanding the Lithiation of silicon and other alloying anodes for Lithium-ion batteries10.1002/adma.201301795 ↗
50. M.N. Obrovac, L. Christensen, Structural changes in silicon anodes during Lithium insertion/extraction, Electrochem. Solid State Lett. 7 (2004) A93. doi:https://doi.org/10.1149/1.1652421.10.1149/1.1652421 ↗
51. Alloy negative electrodes for Li-ion batteries10.1021/cr500207g ↗
52. Towards high capacity Li-ion batteries based on silicon-graphene composite anodes and sub-micron V-doped LiFePO4 cathodes10.1038/srep37787 ↗
53. Q. Huang, M.J. Loveridge, R. Genieser, M.J. Lain, R. Bhagat, Electrochemical Evaluation and Phase-related Impedance Studies on Silicon–Few Layer Graphene (FLG) Composite Electrode Systems, Sci. Rep. 8 (2018) 1386. doi:https://doi.org/10.1038/s41598-018-19929-3.10.1038/s41598-018-19929-3 ↗
54. Designing Si/porous-C composite with buffering voids as high capacity anode for lithium-ion batteries10.1016/j.electacta.2014.01.094 ↗
55. Electrochemical performance enhancement of porous Si lithium-ion battery anode by integrating with optimized carbonaceous materials10.1016/j.electacta.2020.135687 ↗
56. Hollow Si/C composite as anode material for high performance lithium-ion battery10.1016/j.powtec.2016.05.002 ↗
57. Assessment of the electrochemical behaviour of silicon@carbon nanocomposite anode for lithium-ion batteries10.1016/j.jallcom.2020.154644 ↗
58. Pomegranate like silicon–carbon composites prepared from lignin-derived phenolic resins as anode materials for lithium-ion batteries10.1039/D3NJ02547K ↗
59. Y.-H. Li, S.K. Babu, D.H. Gregory, S. Kheawhom, J.-K. Chang, W.-R. Liu, Silicon/hard carbon composites synthesized from phenolic resin as anode materials for Lithium-ion batteries, Nanomaterials 15 (2025) 455. doi:https://doi.org/10.3390/nano15060455.10.3390/nano15060455 ↗
60. Cost-effective preparation of high-performance Si@C anode for lithium-ion batteries10.1007/s10800-024-02150-8 ↗
61. Design of hierarchical buffer structure for silicon/carbon composite as a high-performance Li-ion batteries anode10.1007/s10854-021-07500-2 ↗
62. Improving electrochemical performance of silicon-carbon anode for lithium-ion batteries via one-step etching10.1016/j.cej.2025.164382 ↗
63. In situ prepared high-performance graphene/silicon/carbon composites as anodes for Lithium-ion batteries10.1021/acs.langmuir.5c01362 ↗
64. The effect of the charging protocol on the cycle life of a Li-ion battery10.1016/j.jpowsour.2006.06.040 ↗
65. High–performance recycled silicon–based Li–ion battery anodes enabled by Si/C composites engineering and graphene oxide protective layer10.1016/j.jpowsour.2025.238585 ↗
66. Silicon in hollow carbon Nanospheres assembled microspheres cross-linked with N-doped carbon fibers toward a binder free, high performance, and flexible anode for Lithium-ion batteries10.1002/adfm.202101487 ↗
67. Galvanostatic intermittent titration technique reinvented: part I. A critical review10.1149/1945-7111/ac3940 ↗
68. Study of the lithium diffusion properties and high rate performance of TiNb6O17 as an anode in lithium secondary battery10.1038/s41598-017-16711-9 ↗
69. Kinetic analysis of silicon–lithium alloying reaction in silicon single crystal using soft X-ray absorption spectroscopy10.1039/D3RA02554C ↗
70. Amorphous shear band formation in crystalline Si-anodes governs lithiation and capacity fading in Li-ion batteries10.1038/s43246-024-00599-w ↗
71. Raman spectroscopic studies of Li x Si y compounds10.1002/jrs.4308 ↗
72. Synthesis of Si/rGO nano-composites as anode electrode for lithium-ion battery by CTAB and citrate: physical properties and voltage–capacity cyclic characterizations10.1007/s10854-021-06202-z ↗
73. Synthesis and microwave absorbing properties of SiC nanowires10.1007/s00339-018-2202-4 ↗
74. K. Chen, G. Huang, J. Ma, J. Wang, D. Yang, X. Yang, Y. Yu, X. Zhang, The stabilization effect of CO 2 in Lithium–oxygen/CO 2 batteries, Angew. Chem. Int. Ed. 59 (2020) 16661–16667. doi:https://doi.org/10.1002/anie.202006303.10.1002/anie.202006303 ↗
75. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries10.1016/j.electacta.2010.05.072 ↗