Inclusion connectivity as a design parameter for stiffness and dissipation in MRF-based elastomer composites
Source abstract
Abstract
The magneto-mechanical response of magnetorheological fluid (MRF)-based elastomer composites is usually tuned through particle fraction and magnetic field intensity. Here we demonstrate that inclusion connectivity is an equally decisive structural parameter governing stiffness, dissipation, and cyclic reversibility. PDMS composites incorporating either continuous double-spiral or discontinuous concentric-ring inclusions were fabricated with fractions of magnetizable particle of 4.2 and 13.3 vol% (fractions of MRF 14.6 and 46 vol%, respectively). Uniaxial compression tests (5% maximum strain, 32 μm·min −1 ) were performed under magnetic fields of 0, 160, and 500 mT. At zero field, replacing a spiral topology with a three-ring discontinuous architecture at 46 vol% MRF decreases the Young's modulus by 20%, evidencing the compliance induced by architectural discontinuity. The nonlinear response is accurately captured by the Mooney-Rivlin model ( R 2 ≈ 1 ). The surface-to-volume ratio of fluid inclusions ( S / V = 2.4–8.3 mm -1 ) emerges as a unifying geometric descriptor controlling stiffness and energy dissipation. Under magnetic activation, discontinuous rings display higher apparent stiffness than spirals due to volumetric confinement of the structured MRF. Cyclic tests reveal geometry-controlled dissipative regimes and a progressive saturation of energy dissipation at high interfacial density, while residual strain decreases with increasing particle fraction and field intensity, and remains lower for discontinuous architectures.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dielectric materials and actuators · Elasticity and Material Modeling · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Magnetorheological elastomers: properties and applications10.1117/12.352787 ↗
2. On the properties of magnetorheological elastomers in shear mode: design, fabrication and characterization10.1016/j.compositesb.2018.09.080 ↗
3. Magnetorheological Elastomers and their Applications
4. Fabrication and characterization of isotropic magnetorheological elastomers10.1016/j.polymertesting.2005.03.015 ↗
5. Fabrication and characterization of highly controllable magnetorheological material in compression mode10.1177/1045389X20930081 ↗
6. Ginder · 2000 · 418
7. Controllable and reversible tuning of material rigidity for robot applications10.1016/j.mattod.2017.10.010 ↗
8. Magnetostrictive phenomena in magnetorheological elastomers10.1142/S021797920201244X ↗
9. A novel hybrid magnetorheological elastomer developed by 3D printing10.1016/j.matdes.2016.11.006 ↗
10. A hybrid magnetorheological elastomer developed by encapsulation of magnetorheological fluid10.1007/s10853-018-2012-2 ↗
11. The magnetic fluid clutch10.1109/T-AIEE.1948.5059821 ↗
12. A unified understanding of magnetorheological elastomers for rapid and extreme stiffness tuning10.1039/D3LP00109A ↗
13. Solid–liquid composites for soft multifunctional materials
14. The magneto-mechanical coupling of multiphase magnetorheological elastomers
15. Experimentally validated combined stiffness expression for finite domain containing multiple inclusions10.5802/crmeca.11 ↗
16. Soft when needed, stiff when required: magnetic control of mechanical behavior via fluid-inclusion composites10.1016/j.matdes.2026.115614 ↗
17. Effects of embedded surfactants on the surface properties of PDMS; applicability for autonomous microfluidic systems10.1007/s10404-017-1916-5 ↗
18. Tuning the bulk and surface properties of PDMS networks through cross-linker and surfactant concentration10.1021/acs.macromol.1c01600 ↗
19. Properties and applications of PDMS for biomedical engineering: a review10.3390/jfb13010002 ↗
20. C. Jin, Z. Wang, A.A Volinsky, A. Sharfddin, and N.D. Gallant 2016 Mechanical characterization of crosslinking effect in polydimethylsiloxane using nanoindentation Polym. Test. 56 329–36.10.1016/j.polymertesting.2016.10.034 ↗
21. PDMS bonding technologies for microfluidic applications: a review10.3390/bios11080292 ↗
22. Proximity effects in matrix-inclusion composites: elastic effective behavior, phase moments, and full-field computational analysis10.3390/math10234437 ↗
23. Effect of liquid inclusions on the elasto-mechanical properties of solid-liquid composites10.1080/15376494.2023.2282117 ↗
24. An elliptical liquid inclusion in an infinite elastic plane
25. Stiffening solids with liquid inclusions10.1038/nphys3181 ↗
26. S.K. Melly, L. Liu, Y. Liu, and J. Leng 2021 A review on material models for isotropic hyperelasticity International Journal of Mechanical System Dynamics 1 71–88.10.1002/msd2.12013 ↗
27. Systematic fitting and comparison of Hyperelastic continuum models for elastomers10.1007/s11831-022-09865-x ↗
28. Effect of magnetic dipolar interactions and size dispersity on the origin of steady state magnetomechanical response in bidisperse Mn–Zn ferrite spherical particle based magnetorheological fluids10.1039/C9NJ00947G ↗
29. Film squeezing process for generating oblate spheroidal particles with high yield and uniform sizes10.1007/s00396-016-3838-2 ↗
30. Flow fields around active droplets squeezing through tight confinements10.1103/PhysRevFluids.10.044202 ↗
31. A constitutive model for the Mullins effect with permanent set in particle-reinforced rubber10.1016/j.ijsolstr.2003.11.014 ↗