Conformable supramolecular solids based on acid dihydrazide and 1-hydroxyethylidene-1,1-diphosphonic acid for dielectric gap filling and capacitive coupling enhancement in soft electronics
Source abstract
Abstract
Achieving effective dielectric coupling across non-ideal, compliant interfaces remains a significant challenge in soft capacitive electronics, where surface roughness, mechanical mismatch, and parasitic air gaps can substantially reduce capacitance. Here, we report a supramolecular ADH–HEDP solid formed via thermal aqueous co-assembly of adipic acid dihydrazide (ADH) and 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) at a 1: 1 M ratio. Following solvent removal, the material forms a dense, clay-like, and conformable solid that can be readily processed as an interfacial layer. Raman and FTIR spectroscopy, supported by solution-state 31 P NMR, confirm the formation of a noncovalent supramolecular network driven by strong intermolecular interactions between hydrazide and phosphonic acid functionalities. Broadband impedance spectroscopy reveals a frequency-dependent electrical response characterized by electrode polarization and proton-mediated charge transport at low frequencies, a well-defined bulk resistance corresponding to a conductivity of ∼4 × 10 −6 S cm −1 , and a transition to dielectric-dominated behavior at higher frequencies, where the intrinsic relative permittivity approaches ∼9.4. The material further exhibits a thermal conductivity of 0.426 W m −1 K −1 and a strain-adaptive compressive response, showing initial compliance followed by pronounced strain-stiffening at higher deformation, enabling effective conformal contact under load. In a proof-of-concept parallel-plate capacitor configuration, replacing an air gap with the ADH–HEDP interlayer increases capacitance from 3.36 to 11.37 pF at 100 kHz under fixed electrode spacing, demonstrating enhanced capacitive coupling. These results establish ADH–HEDP supramolecular solids as a promising platform for compliant dielectric interface engineering, combining moderate ionic conductivity, dielectric functionality, and mechanical adaptability for soft electronic applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dielectric materials and actuators · Advanced Sensor and Energy Harvesting Materials · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Long-term stable flexible strain sensor fabricated by constant hysteresis10.1021/acsami.5c16152 ↗
2. A review of flexible mechanics mapping: the sensing, transmission, computation, and integration paradigm10.1021/acsami.5c24516 ↗
3. Liquid metal-based self-healing conductors for flexible and stretchable electronics10.1021/acsami.4c10541 ↗
4. Soft and stretchable liquid metal–elastomer composite for wearable electronics10.1021/acsami.2c10025 ↗
5. Recent progress and challenges in paper-based microsupercapacitors for flexible electronics: a comprehensive review10.1021/acsami.4c01438 ↗
6. Soft nanomembrane sensor-enabled wearable multimodal sensing and feedback system for upper-limb sensory impairment assistance10.1021/acsnano.4c15530 ↗
7. Soft materials and devices enabling sensorimotor functions in soft robots10.1021/acs.chemrev.4c00906 ↗
8. A flexible capacitive proximity-tactile dual-mode sensor based on the biomimetic petal-like electrode10.1016/j.sna.2024.115975 ↗
9. Designing wearable capacitive pressure sensors with arrangement of porous pyramidal microstructures10.1186/s40486-023-00178-7 ↗
10. Broad detection range of flexible capacitive sensor with 3D printed interwoven hollow dual-structured dielectric layer
11. All-printed flexible capacitive array tactile force sensors with tunable sensitivity and low crosstalk for micro motion detection10.1016/j.sna.2023.114337 ↗
12. Liquid metal composite-based flexible pressure sensors with high sensitivity10.1021/acsami.5c05509 ↗
13. High-performance capacitive tactile sensors enabled by self-healing PDMS networks with enhanced dielectric properties via cross-linking density and organic salt engineering10.1021/acsaelm.5c01114 ↗
14. Flexible linkage design of composite dielectric layer for high-performance capacitive pressure sensor10.1021/acsaelm.5c00491 ↗
15. Softening implantable bioelectronics: material designs, applications, and future directions10.1016/j.bios.2024.116328 ↗
16. Programmable materials: current trends, challenges, and perspectives
17. Approaches to deformable physical sensors: electronic versus iontronic10.1016/j.mser.2021.100640 ↗
18. Towards robust flexible electronics: fabrication approaches and ongoing research challenges10.1016/j.sna.2025.117053 ↗
19. Sensing in soft robotics10.1021/acsnano.3c04089 ↗
20. Facile fabrication of multilayer stretchable electronics via a two-mode mechanical cutting process10.1021/acsnano.1c10011 ↗
21. Capacitive sensing for facial expression recognition and beyond: materials, architectures, and wearable applications10.1016/j.sna.2025.117200 ↗
22. Three-dimensionally ordered macroporous BaTiO3 framework-reinforced polymer composites with improved dielectric properties10.1007/s42452-021-04166-7 ↗
23. Particle morphology dependent dielectric properties of CaCu3Ti4O12/polyvinyl alcohol composite films10.1016/j.materresbull.2021.111632 ↗
24. From synthesis to application: high-quality flexible piezoelectric sensors fabricated from tetragonal BaTiO3/ P(VDF-TrFE) composites10.1016/j.sna.2023.114585 ↗
25. Enhancing dielectric properties of (CaCu3Ti4O12 NWs–graphene)/PVDF ternary oriented composites by hot stretching
26. Origins of leakage currents on electrolyte-gated graphene field-effect transistors10.1021/acsaelm.1c00854 ↗
27. Novel high dielectric polymer composites with BaTiO3 co-doped by Nb2O5 and Co3O410.1016/j.cplett.2022.139997 ↗
28. Dielectric elastomers with liquid metal and polydopamine-coated graphene oxide inclusions10.1021/acsami.2c21994 ↗
29. Achieving exceptional elasto-dielectric properties in soft and stretchable elastomers through liquid metal particle incorporation: a comprehensive insight into fundamentals and multifaceted applications10.1007/s42114-025-01351-9 ↗
30. Hierarchical response network boosts solvent-free ionic conductive elastomers with extreme stretchability, healability, and recyclability for ionic sensors10.1021/acsami.1c22602 ↗
31. Biocompatible tough ionogels with reversible supramolecular adhesion10.1021/jacs.4c01758 ↗
32. pH-and temperature-responsive supramolecular assemblies with highly adjustable viscoelasticity: a multi-stimuli binary system10.1039/D3SM00549F ↗
33. Rheological dynamics and structural characteristics of supramolecular assemblies of β-cyclodextrin and sulfonic surfactants10.1039/D3SM00132F ↗
34. Self-healing polymers for electronics and energy devices10.1021/acs.chemrev.2c00231 ↗
35. The dynamical signature and scaling of supramolecular assemblies
36. Influence of chain length of amido betaines and amine degree of diamines on the binary supramolecular assembly and viscosity dynamics of amido betaine/diamine coacervates10.1016/j.jciso.2024.100112 ↗
37. Monitoring the stress-activated region in hydrogen-bonded supramolecular polymer networks10.1021/acs.macromol.5c00311 ↗
38. Exploring strategies for high dielectric constant and low loss polymer dielectrics10.1021/jz501831q ↗
39. Nanostructural and rheological transitions of pH-responsive supramolecular systems involving a zwitterionic amphiphile and a triamine10.1016/j.colsurfa.2022.130067 ↗
40. Proton exchange membranes with functionalized sulfonimide and phosphonic acid groups for next-generation fuel cells operating at 120°C10.1016/j.cej.2024.150971 ↗
41. Poly-hydroxyethylidene-1,1-diphosphonic acid (PHEDP) as a highly effective water-retentive and proton-conductive material for low-humidity proton exchange membranes10.1016/j.memsci.2020.118144 ↗
42. A study regarding dielectric response and ac electrical conductivity of Schottky structures (SSs) interlaid with (Fe3O4-PVA) by using dielectric spectroscopy method10.1007/s10904-025-03667-x ↗
43. Investigation of Na+ ion conduction, NTCR behavior, and dielectric relaxation mechanisms in Na2NiP2O7 pyrophosphate solid electrolyte10.1021/acsomega.5c12260 ↗
44. Frequency-dependent dielectric and impedance properties of TPU-graphene nanocomposites10.1016/j.sna.2025.116938 ↗
45. Temperature effects on the structural stability of EF4K peptide membranes: insights into mono- and multilayer architectures10.1021/acsmaterialsau.5c00214 ↗
46. Self-assembly mechanisms of zein induced by solvent evaporation: insights from morphological and structural evolution of micelles10.1016/j.jfutfo.2025.09.026 ↗
47. PVA-based hydrogen-bonded supramolecular adhesive with core–shell nanoarchitectures for multifunctional and sustainable applications10.2991/978-94-6463-780-9 ↗
48. Dynamic regulation of hydrogen bonding networks and solvation structures for synergistic solar-thermal desalination of seawater and catalytic degradation of organic pollutants10.1007/s40820-024-01544-9 ↗
49. Raman spectroscopic signatures of amyloid fibrils: insights into structural and biochemical changes in human tissues10.1016/j.bpc.2025.107480 ↗
50. Investigation of phosphonic acids based on Raman and surface-enhanced Raman spectroscopy10.1021/acsomega.5c04862 ↗
51. Investigating the H-bond network of pyridine–water aqueous solutions by raman spectroscopy and DFT10.1021/acsomega.5c10822 ↗
52. Hydrogen bond-stabilized mixtures for efficient carbon dioxide capture
53. Computational analysis of vibrational spectra of hydrogen bonds in sII and sH gas hydrates10.1021/acsomega.3c01237 ↗
54. The experimental and theoretical spectroscopic elucidation of molecular structure, electronic properties, thermal analysis, biological evaluation, and molecular docking studies of isococculidine10.1016/j.molliq.2023.123212 ↗
55. Novel insight into charge transfer regulation based on carrier density-dependent ag/ITO composite films10.1016/j.saa.2022.121236 ↗
56. Characteristics of the interaction mechanisms of procyanidin B1 and procyanidin B2 with protein tyrosine phosphatase-1B: analysis by kinetics, spectroscopy methods and molecular docking10.1016/j.saa.2021.119910 ↗
57. A flexible phosphonate metal–organic framework for enhanced cooperative ammonia capture10.1021/jacs.4c12430 ↗
58. On the shape of the simulated infrared spectral density of strongly hydrogen-bonded systems: mapping and identification of Hadži ABC structure in phosphonic acid dimers in gas phase10.1016/j.vibspec.2024.103730 ↗
59. Osteoconductive, osteogenic, and antipathogenic plasma electrolytic oxidation coatings on titanium implants with BMP-210.1021/acsami.3c08954 ↗
60. Electrochemical wet-spinning process for fabricating strong PAN fibers via an in situ induced plasticizing effect10.1016/j.polymer.2020.122641 ↗
61. Experimental and analytical framework for “mix-and-read” assays based on split luciferase10.1021/acsomega.2c02319 ↗
62. Rapid and application-tailored assessment tool for biogenic powders from crustacean Shell waste: Fourier transform-infrared spectroscopy complemented with X-ray diffraction, scanning Electron microscopy, and nuclear magnetic resonance spectroscopy10.1021/acsomega.1c03279 ↗
63. The hydrogen bond in the solid state10.1002/1521-3773(20020104)41:1<48::AID-ANIE48>3.0.CO;2-U ↗
64. Predicting hydrogen-bond strengths from acid− base molecular properties. The p K a slide rule: toward the solution of a long-lasting problem10.1021/ar800001k ↗
65. Hydrogen bond design principles
66. Cooperative or anticooperative: how noncovalent interactions influence each other10.1021/acs.jpcb.5b03005 ↗
67. Pentafluorophenylphosphonic acid as a new building block for molecular crystal fabrication10.1021/acs.cgd.0c01402 ↗
68. Verifying the reliability of the steam-jet test on coated thermoplastic olefin substrates by a semi-quantitative peel test10.1016/j.polymertesting.2021.107145 ↗
69. Versatile light-mediated synthesis of dry ion-conducting dynamic bottlebrush networks with high elasticity, interfacial adhesiveness, and flame retardancy10.1021/acs.macromol.2c01234 ↗
70. Mechanistic insights into oxygen tolerance of graphitic carbon nitride-mediated heterogeneous photoinduced Electron transfer-reversible addition fragmentation chain transfer polymerization10.1021/acsapm.1c00586 ↗
71. Enhanced thermal transport in aramid composite films via intrinsic interfacial interaction and synergistic orientation10.1021/acsami.5c13294 ↗
72. Supramolecular polymer materials assembled via polymerization and subsequent cross-linking through a single hydrogen-bonding motif10.1021/acs.macromol.5c02659 ↗
73. Enhanced thermal conductivity in tough and environmentally resilient hydrogels10.1002/admi.202500752 ↗
74. Metal–organic–inorganic nanocomposite thermal interface materials with ultralow thermal resistances10.1021/acsami.7b00093 ↗
75. Chemically linked metal-matrix nanocomposites of boron nitride nanosheets and silver as thermal interface materials10.1088/1361-6528/aaa668 ↗
76. Experimental and Modeling study of interfacial polarization (MWS) in a two-phase model epoxy solid system10.1021/acs.macromol.5c02901 ↗
77. Dielectric relaxations in a liquid crystal along with thermistor application10.1140/epje/s10189-022-00249-4 ↗
78. Frequency and voltage dependent electrical and dielectric properties of Al/p-Si semiconductor structures with GO interlayer10.1016/j.physb.2025.417301 ↗
79. Insights into polarization relaxation of electromagnetic wave absorption
80. Hydrogen bond network restructuring in water: dielectric spectroscopy insights from dissolved gas studies10.1016/j.molliq.2025.128775 ↗
81. Hydrogen bonding dynamics and cooperative interactions of NMP/methanol binary mixture studied by dielectric relaxation spectroscopy and their temperature dependence10.1016/j.molliq.2025.128018 ↗
82. Hydrogen-bonded organic frameworks: a rising class of porous molecular materials10.1021/accountsmr.0c00019 ↗
83. Temperature-dependent structural transition in hydrogen-bonded supramolecular polymers using coarse-grained simulations10.1021/acs.macromol.5c03020 ↗
84. Highly ordered macroporous hydrogen-bonded organic frameworks based on small biocompatible molecules
85. Advances in self-healing supramolecular soft materials and nanocomposites10.1186/s40580-019-0199-9 ↗