journal article·2026-09Open access

Room temperature RF sputtering of mixed ionic and electronic conductor Nd2Ni0.8Cu0.2O4+δ films

N. Coppola, M. Paone, H.S. Ur Rehman, S. Scarnicci, G. Carapella, A. Guarino, M. Tkalčević, L. Calcagnile, G. Quarta, A. Galdi, L. Maritato

Abstract

Lowering the operating temperature of Solid Oxide Fuel Cells (SOFCs) is essential for improving durability and enabling large-scale commercialization. Mixed ionic–electronic conductors (MIECs) of the Ruddlesden–Popper family, such as Nd₂Ni₁₋ₓCuₓO₄₊ δ (NNCO), offer attractive cathode properties due to their high oxygen transport and favourable defect chemistry. In this work, we investigate the fabrication of Nd₂Ni₀.₈Cu₀.₂O₄₊ δ thin films using a room-temperature RF sputtering process followed by moderate-temperature annealing. To simplify deposition, a single stoichiometric target was employed, despite the compositional challenges posed by elements with different sputtering yields. We examine the effect of sputtering power density on phase formation and film stoichiometry through X-ray diffraction, Rutherford Backscattering Spectrometry, Energy-Dispersive X-ray Spectroscopy, and temperature-dependent resistivity measurements. Increasing the sputtering power density strongly reduces the presence of spurious phases and promotes stabilization of the desired n = 1 Ruddlesden–Popper phase. Films deposited at 230 W (3.1 W·cm −2 ) exhibit a predominant NNCO structure, elemental ratios close to nominal composition, and resistivity values consistent with bulk materials. These findings demonstrate that high-power sputtering combined with ex-situ annealing enables the production of NNCO thin films suitable for SOFC cathodes. The results support the potential of PVD-based approaches for scalable fabrication of advanced SOFC components. • Stoichiometric Nd₂Ni₀.₈Cu₀.₂O₄ films grown by RF sputtering. • High RF power density enables effective single-target deposition. • Optimized discharge power prevents Cu deficiency in the films. • Pure Ruddlesden–Popper phase stabilized by ex-situ annealing. • Films exhibit electrical resistivity comparable to bulk material.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Physics of Superconductivity and Magnetism · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Solid oxide fuel cell: decade of progress, future perspectives and challenges10.1016/j.ijhydene.2021.06.020 ↗
2. A comprehensive review of recent progresses in cathode materials for proton-conducting SOFCs10.1016/j.enrev.2023.100038 ↗
3. Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy10.1016/S1364-0321(02)00014-X ↗
4. A review on materials, advantages, and challenges in thin film based solid oxide fuel cells10.1002/er.8238 ↗
5. Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells10.1016/j.pmatsci.2011.08.002 ↗
6. The properties of intermediate-temperature solid oxide fuel cells with thin film gadolinium-doped ceria electrolyte10.3390/membranes12090896 ↗
7. Optimization of the electrical performances in solid oxide fuel cells with room temperature sputter deposited gd0.1ce0.9o1.95 buffer layers by controlling their granularity via the in-air annealing step10.1016/j.ijhydene.2020.02.187 ↗
8. Enhancing oxygen reduction reaction of YSZ/La2NiO4+δ using an ultrathin La2NiO4+δ interfacial layer10.1016/j.jallcom.2018.02.339 ↗
9. A review on cathode materials for conventional and proton-conducting solid oxide fuel cells10.1016/j.jallcom.2021.162458 ↗
10. Performance of MIEC cathodes in SOFC stacks evaluated by means of FEM modeling. ECS10.1149/MA2014-01/16/707 ↗
11. Ruddlesden-popper-type Nd2-XNi1-YCuyO4±δ layered oxides as candidate materials for MIEC-type ceramic membranes10.1016/j.jeurceramsoc.2020.04.054 ↗
12. A-site element tuning in Nd2NiO4-based Ruddlesden-Popper cathodes: enhanced electrochemical performance and stability for intermediate-temperature SOFCs
13. Electrochemical properties and rate-limiting processes in Nd2NiO4+δ cathode for intermediate-temperature solid oxide fuel cells
14. Oxygen migration and proton diffusivity in transition-metal (Mn, Fe, Co, and Cu) doped Ruddlesden-Popper oxides10.1039/C9TA05893A ↗
15. Crystal structure and functional properties of Nd1.6Ca0.4Ni1-YCuyO4+δ as prospective cathode materials for intermediate temperature solid oxide fuel cells10.1016/j.ijhydene.2020.10.243 ↗
16. Properties of copper doped neodymium nickelate oxide as cathode material for solid oxide fuel cells10.1515/amm-2016-0106 ↗
17. Rare earth nickelate electrodes containing heavily doped ceria for reversible solid oxide fuel cells
18. Enhanced performance of Gadolinia-doped ceria diffusion barrier layers fabricated by pulsed laser deposition for large-area solid oxide fuel cells10.1021/acsaem.8b00039 ↗
19. Large area solid oxide fuel cells with room temperature sputtered barrier layers: role of the layer thickness and uniformity in the enhancement of the electrochemical performances and durability10.1016/j.ijhydene.2023.04.170 ↗
20. Atomic layer deposition functionalized composite SOFC cathode La0.6Sr0.4Fe0.8Co0.2O3-δ -Gd0.2Ce0.8O1.9: enhanced long-term stability10.1021/cm402879r ↗
21. Reducing critical raw material use in commercial solid oxide fuel cells using vertically aligned thin-film cathodes with enhanced long-term stability10.1002/eem2.70011 ↗
22. Large area deposition by radio frequency sputtering of Gd0.1Ce0.9O1.95 buffer layers in solid oxide fuel cells: structural, morphological and electrochemical investigation10.3390/ma14195826 ↗
23. Effects of in-air post deposition annealing process on the oxygen vacancy content in sputtered GDC thin films probed via operando XAS and raman spectroscopy10.1021/acsaelm.4c00992 ↗
24. Structural and electrical characterization of sputter-deposited Gd0.1Ce0.9O2−δ thin buffer layers at the Y-stabilized zirconia electrolyte interface for IT-solid oxide cells10.3390/catal8120571 ↗
25. Handbook of thin film technology10.1016/0040-6090(71)90064-2 ↗
26. Fabrication of superconducting Nd2-XCexCuO 4±δ films by automated dc sputtering technique10.1016/j.physc.2013.09.010 ↗
27. A new accelerator mass spectrometry facility in Lecce, Italy10.1016/j.nimb.2004.04.007 ↗
28. Performance of Pr2(Ni,Cu)O4+δ electrodes in protonic ceramic electrochemical cells with unseparated and separated gas spaces10.1016/j.jmst.2021.03.056 ↗
29. Rational design and electrochemical validation of reduced graphene oxide (RGO) supported CeO2-Nd2O3/RGO ternary nanocomposite as an efficient material for supercapacitor electrodes10.1007/s10800-023-01885-0 ↗
30. Investigation of structural and optical features of polyvinyl alcohol films doped with Nd2O3 nanoparticles for UV shielding10.1007/s11082-024-07112-0 ↗
31. Darstellung, kristallstruktur und spektroskopische charakterisierung von NiP 4O 11 und CaNiP 2O 710.1002/zaac.200400077 ↗
32. Construction of structural phase diagram of Nd2Ni1-XCuxO4+δ and effect of crystal structure and phase transition on electrical conduction behavior10.1016/j.materresbull.2018.10.036 ↗
33. Physical properties of epitaxial la 2 NiO 4 + d thin films10.1016/j.apsusc.2005.12.136 ↗
34. Draper · 1998