journal article·2026-04

Hot injection synthesis parameters effects on the structure, crystallinity, microstructure and optical properties of Sb2S3 nanopowders

Nikola Ilić, Ivana Validžić, Tanja Barudžija, Sanja Stevanović

Publisher page

Abstract

Antimony sulfide amorphous and crystalline nanoparticles were synthesized by the hot-injection method. X-ray diffraction analysis confirmed the gradual growth and crystallization of amorphous particles with synthesis time and temperature. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) revealed spherical shapes of amorphous nanoparticles of 10–50 nm in radius and clothespin-shaped crystalline particles with a radius and length of several micrometers and an approximate aspect ratio of 2.5. Diffuse reflectance spectroscopy (DRS) implied a 1.8–2.0 eV, size-tunable, indirect band gap for the amorphous phase and a smaller, ∼1.6 eV, direct band gap for the crystalline phase. Thermogravimetry (TG/DSC) and Fourier-transform infrared (FTIR) spectroscopy studies show that amorphous powders have a low concentration of organic molecules, which are primarily eliminated during crystallization. The powders were spray deposited as an absorber layer in ITO/TiO2 + Sb2S3/P3HT/I2(I−)/Al-composed solar cells, giving up to 1.2 % energy conversion efficiency when illuminated by a 290 W/m2 tungsten lamp as a source.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Phase-change materials and chalcogenides · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Well-defined Sb2S3 microspheres: high-yield synthesis, characterization, their optical and electrochemical hydrogen storage properties10.1016/j.solidstatesciences.2011.02.007 ↗
2. One-pot method synthesis of the multi-morphology Sb2S3 superstructure increasing the sodium storage capacity and expanding theinterlayer spacing10.1016/j.apsusc.2022.153138 ↗
3. Growth of crystalline Sb2S3 nanorods by hydrothermal method10.1016/S0022-0248(03)01266-1 ↗
4. Simultaneous synthesis of various Sb2S3 nanostructures by vapor transport technique10.1016/j.matchemphys.2019.121750 ↗
5. Synthesis of water-soluble antimony sulfide quantum dots and their photoelectric properties10.1186/s11671-017-2421-1 ↗
6. Urchinlike nanostructure of single-crystalline nanorods of Sb2S3 formed at mild reaction condition10.1021/am301141q ↗
7. Mechanochemical synthesis of Sb2S3 and Bi2S3 nanoparticles10.1016/j.ces.2012.02.028 ↗
8. Rationally designed Sb2S3/PDI composites with enhanced visible light photoactivity10.1016/j.catcom.2021.106368 ↗
10. Synthesis and electrical transport properties of single-crystal antimony sulfide nanowires10.1021/jp076828q ↗
11. Solvothermal synthesis of Sb2S3 nanowires on a large scale10.1016/S0022-0248(03)01494-5 ↗
12. Novel single-source precursors approach to prepare highly uniform Bi2S3 and Sb2S3 nanorods via a Solvothermal treatment10.1021/cm062549o ↗
13. Ultrasonic preparation of stibnite nanostructures using aliphatic phosphonium ionic liquid
14. New Photocatalyst, Sb2S3, for degradation of methyl orange under visible-light irradiation10.1021/jp806496d ↗
15. Revealing the formation mechanism and band gap tuning of Sb2S3 nanoparticles10.3762/bjnano.12.76 ↗
16. Fabrication of crystalline Sb2S3 sheaf structure composed of nanorods by a hot-injection method10.1007/s12034-020-02121-7 ↗
17. Simple colloidal synthesis of single-crystal Sb-Se-S nanotubes with composition dependent band-gap energy in the near-infrared10.1021/nl9002816 ↗
18. Colloidal Sb2S3 nanocrystals: synthesis, characterization and fabrication of solid-state semiconductor sensitized solar cells10.1039/C5TA09546H ↗
19. Fabrication of amorphous Sb2S3 films by chemical deposition10.1016/0022-3093(94)90317-4 ↗
20. Growth of single crystal Sb2S3 semiconductor pillars by sol-gel method10.1016/j.mtla.2023.101842 ↗
21. Sb2S3 grown by ultrasonic spray pyrolysis and its application in a hybrid solar cell10.3762/bjnano.7.158 ↗
22. Formation mechanisms of uniform nanocrystals via hot-injection and heat-up methods10.1002/smll.201002022 ↗
23. A chain-structure nanotube: growth and characterization of single-crystal Sb2S3 nanotubes via a chemical vapor transport reaction10.1002/adma.200305757 ↗
24. Benzene-thermal synthesis and characterization of ultrafine powders of antimony sulfide10.1016/S0025-5408(98)00106-8 ↗
25. Pressure-controlled fabrication of stibnite nanorods by the solvothermal decomposition of a simple single-source precursor10.1021/cm000031t ↗
26. Studies on the structure and morphology of ultrafine particles of metallic sulfides10.1016/0022-0248(89)90131-0 ↗
27. Organic synthesis with different OA/EHA ratios of Sb2S3 nanowires of flower-like organization and [010] orientation
28. Amorphous non-doped and Se, Cu, and Zn-doped Sb2S3 nanoparticles prepared by a hot-injection method: bandgap tuning and possible observation of the quantum size effect10.1007/s11051-023-05695-5 ↗
29. Structural analysis, electronic and optical properties of the synthesized Sb2S3 nanowires with small band gap
30. Structural, morphological, optical, and electronic properties of amorphous non-doped and I and Sn doped Sb2S3 nanoparticles10.1016/j.mssp.2021.106196 ↗
31. XPS study of iodine and tin doped Sb2S3 nanostructures affected by non-uniform charging10.1016/j.apsusc.2021.150822 ↗
32. Confirmation of incorporation of Cu and Se ions in applied p- and n-type-doped Sb2S3 by photoemission spectroscopy10.1007/s11664-018-6072-5 ↗
33. Growth of Sb2S3 nanowires synthesized by colloidal process and self-assembly of amorphous spherical Sb2S3 nanoparticles in wires formation10.1007/s12540-012-6010-7 ↗
34. Structural and morphological dependences of Sb2S3 nanobars synthesised by organo-colloidal process on precursor concentrations and reaction times10.1016/j.jcrysgro.2012.06.003 ↗
35. Colloidal synthesis of Sb2S3 nanorods/bars with strong preferred orientation10.1016/j.matlet.2011.03.032 ↗
36. High-efficiency Sb2S3-based hybrid solar cell at low light intensity: cell made of synthesized cu and se-doped Sb2S310.1002/pip.2724 ↗
37. Structural, optical and electrical properties of applied Amorphized and polycrystalline Sb2S3 thin films10.1007/s11661-015-3282-9 ↗
38. Quantum dot solar cells. Semiconductor nanocrystals as light harvesters
39. Sb2S3 nanoparticles through solution chemistry on mesoporous TiO2 for solar cell application10.1016/j.cplett.2012.10.032 ↗
40. A review on the device efficiency limiting factors in Sb2S3-based solar cells and potential solutions to optimize the efficiency10.1007/s11082-023-04945-z ↗
41. Flexible and high-efficiency Sb2S3/solid carrier solar cell at low light intensity10.1007/s10311-017-0702-7 ↗
42. Towards all inorganic antimony sulphide semitransparent solar cells10.1038/s41598-025-85676-x ↗
43. Enhanced antimony sulfide Sb2S3 Nanobars solar cell performance with doped PCDTBT polymer10.1155/2023/2636957 ↗
44. Superstrate structured Sb2S3 thin-film solar cells by magnetron sputtering of Sb and post-sulfurization
45. Temperature-dependent photoluminescence of the synthesized Sb2S3 particles: from nanoparticles to crystalline samples10.1016/j.optmat.2025.116803 ↗
46. Ab-initio structure determination of LiSbWO6 by X-ray powder diffraction10.1016/0025-5408(88)90019-0 ↗
47. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
48. VESTA: a three-dimensional visualization system for electronic and structural analysis10.1107/S0021889808012016 ↗
49. Revealing composition and structure dependent deep-level defect in antimony trisulfide photovoltaics10.1038/s41467-021-23592-0 ↗
50. Two-dimensional (2D) amorphous antimony (III) trisulfide nanosheets: synthesis, photoelectronic property and their transformation to crystalline 1D micro/nanorods10.1016/j.inoche.2018.04.017 ↗
51. Structural and optical properties of amorphous and crystalline antimony sulfide thin-films10.1016/j.tsf.2007.03.043 ↗
52. Preparation and optical studies on flash evaporated Sb2S3 thin films10.1116/1.580847 ↗
53. Electrical and optical properties of bismuth sulphide [Bi2S3] thin films prepared by reactive evaporation10.1016/0038-1098(91)90371-2 ↗
54. Purification of oleylamine for materials synthesis and spectroscopic diagnostics for trans isomers10.1021/acs.chemmater.8b04198 ↗
55. The competition between template growth and catalytic growth of one-dimensional ZnS nanostructures: nanobelts or nanowires10.1039/c3dt50301a ↗
56. Effect of concentration of complexing agent (tartaric acid) on the properties of spray deposited Sb2S3 thin films10.1016/S0254-0584(02)00101-3 ↗
57. Shape-preserving amorphous-to-crystalline transformation of CaCO3 revealed by in situ TEM10.1073/pnas.1914813117 ↗
58. Controlled growth of nanoparticles from solution with in situ liquid transmission electron microscopy10.1021/nl201166k ↗
59. Hybrid solar cells from Sb2S3 nanoparticle ink10.1016/j.solmat.2017.07.046 ↗
60. A rapid and versatile method for solvothermal synthesis of Sb2O3 nanocrystals under mild conditions10.1007/s13204-012-0156-y ↗
61. Effect of temperature cycling on Ostwald ripening10.1021/acs.cgd.8b00267 ↗