journal article·2026-02Open access

Effect of alumina nanofibers addition on the MgO-CaO compounds characteristics

Aziz Shahraki, Adrine Malek Khachatourian, Ali Nemati, Babak Rezaei

Abstract

Basic magnesia-doloma composites are refractory materials valued for their high melting point, excellent thermal stability, durability in alkaline environments, and suitability for quality steel manufacturing, as well as their wide availability. These properties make them attractive for a range of industrial applications. However, a major challenge is their susceptibility to hydration, which can weaken their structure and reduce performance over time. In this study, alumina nanofibers (AlNFs) with an average diameter of 360 nm were incorporated into the MgO-CaO ceramic matrix at concentrations up to 2.5 wt%. The composites were pressed at 100 MPa and sintered for 3 h at 1400 °C in air. The resulting materials were evaluated for their physical properties (hydration resistance, apparent porosity, and bulk density) and mechanical characteristics (cold crushing strength and Vickers microhardness). The phase composition, microstructure, and elemental distribution were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and energy dispersive X-ray spectroscopy (EDS). The results showed that AlNFs reinforcement improved densification, resulting in better physical and mechanical properties. The nanofibers also enhanced hydration resistance by preventing water penetration at grain boundaries and filling pores. The results show that the sample with 2 wt% was optimal. By increasing the AlNFs addition to 2 wt%, the intermediate phases CaAl 4 O 7 and Ca 3 Al 2 O 6 enhanced the compressibility and properties of the composite through solid-state and melt-phase sintering mechanisms, respectively. When the AlNF addition was increased to 2.5 wt%, the slope of improvement in mechanical properties decreased due to excessive grain growth.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Magnesium Oxide Properties and Applications · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Improvement in performance of MgO–CaO refractories by addition of nano-sized ZrO210.1016/j.jeurceramsoc.2007.04.001 ↗
2. Densification and properties of Fe2O3 nanoparticles added CaO refractories10.1016/j.ceramint.2016.04.173 ↗
3. Effect of nano-sized Fe2O3 on microstructure and hydration resistance of MgO-CaO refractories. International
4. Sintering behaviour and hydration resistance of reactive dolomite10.1016/j.ceramint.2011.09.005 ↗
5. Performance improvement of MgO-CaO refractories by the addition of nano-sized Al2O310.1016/j.matchemphys.2017.06.026 ↗
6. Influence of bonding carbon on low carbon Al2O3-C refractory composites10.1016/j.ceramint.2017.06.182 ↗
7. Thermosetting resins for carbon-containing refractories: theoretical basis and novel insights10.1016/j.oceram.2020.100025 ↗
8. The influence of silica nanoparticles addition on the physical, mechanical, thermo-mechanical as well as microstructure of mag-dol refractory composites10.1016/j.ceramint.2017.09.073 ↗
9. Ghasemi · 2016
10. GHASEMI · 2016
11. The effect of CuO addition on the sintering of lime10.1016/S0272-8842(00)00064-X ↗
12. Effeet of Al 2 O 3, MgO and SiO 2 on sintering and hydration Behaviors of CaO ceramics10.4191/KCERS.2002.39.6.528 ↗
13. Hydration resistance and mechano-physical properties improvement of a magnesia-dolomite dense refractory by hercynite spinel10.1016/j.matchemphys.2022.126314 ↗
14. Hydration resistance improvement of MgO-CaO refractories by the addition of Nano-ZrO2
15. Densification and properties of ZrO2 nanoparticles added magnesia–doloma refractories10.1016/j.ceramint.2016.07.021 ↗
16. Defect study of MgO-CaO material doped with CeO 210.1155/2013/673786 ↗
17. MgO–CaO–Cr2O3 composition as a novel refractory brick: use of Cr2O3 nanoparticles10.1016/j.bsecv.2016.11.002 ↗
18. Sintering of lime doped with La2O3 and CeO210.1016/0272-8842(89)90049-7 ↗
19. Phase composition, microstructure and properties of sintered La203-doped lime and dolomite grains10.1016/0272-8842(90)90069-R ↗
20. Effect of nano-titania (η-TiO2) content on the mechano-physical properties of a magnesia refractory composite10.1016/j.ceramint.2016.02.064 ↗
21. Effect of nano-TiO2 additions on the densification and properties of magnesite-dolomite ceramic composite10.1007/s40995-016-0143-3 ↗
22. Microstructural regulation and properties enhancement of MgO–CaO ceramics by doping Y2O310.1016/j.jre.2022.09.016 ↗
23. Effect of carbon nanofibers fabricated from electrospun PAN precursors on the characteristics and densification of MgO–CaO ceramic systems10.1016/j.jeurceramsoc.2024.116698 ↗
24. Investigation of hydration, corrosion, and thermal shock resistance of MgO–CaO ceramic composites reinforced with electrospun carbon nanofibers10.1016/j.materresbull.2025.113752 ↗
25. Electrospun ceramic nanofiber mats today: synthesis, properties, and applications10.3390/ma10111238 ↗
26. Asmatulu · 2018
27. Electrospun nanofibers: materials, synthesis parameters, and their role in sensing applications10.1002/mame.202100410 ↗
28. Effect of zirconia silica nanofibers on flexural strength of feldspathic ceramic-an experimental study10.4103/abr.abr_132_20 ↗
29. Fabrication and applications of ceramic-based nanofiber materials service in high-temperature harsh conditions—a review10.3390/gels9030208 ↗
30. Influence of the addition of alumina nanofibers on the strength of epoxy resins10.3390/ma16041343 ↗
31. Influence of surface functionalization of ceramic nanofibers on morphological, physical and mechanical properties of unsaturated polyester nanocomposites10.1177/26349833221087275 ↗
32. Structural characterization and frictional properties of carbon nanotube/alumina composites prepared by precursor method10.1016/j.mseb.2007.09.013 ↗
33. Ceramic nanofibers versus carbon nanofibers as a reinforcement for magnesium metal matrix to improve the mechanical properties10.1016/j.jksues.2019.03.008 ↗
34. Effect of carbon nanofiber concentration on mechanical properties of porous magnesium composites: experimental and theoretical analysis10.1016/j.msea.2017.09.024 ↗
35. Nanofibers for fiber-reinforced composites
36. Carbon fiber reinforced metal matrix composites: fabrication processes and properties10.1016/j.compositesa.2016.10.032 ↗
37. Effect of fiber type on mechanical properties of short carbon fiber reinforced B4C composites10.1016/j.ceramint.2008.07.023 ↗
38. Fabrication and mechanical properties of high-dispersion-treated carbon nanofiber/alumina composites10.2109/jcersj2.118.847 ↗
39. Effect of carbon nanofibers (CNFs) content on thermal and mechanical properties of CNFs/SiC nanocomposites10.1016/j.compscitech.2009.11.013 ↗
40. Effect of electrospun alumina nanofibers incorporation in ceramic glaze
41. Effect of alumina nanofibers content on the microstructure and properties of ATZ composites fabricated by spark plasma sintering10.1016/j.matpr.2018.12.108 ↗
42. Influence of calcination temperatures on the structural, microstructural, and thermal characteristics of electrospun alumina nanofibers10.1016/j.ceramint.2025.01.275 ↗
43. Stokes · 2021
44. Modelling viscosities of CaO–MgO–Al2O3–SiO2 molten slags10.2355/isijinternational.52.355 ↗
45. Thermodynamic stability of spinel phase at the interface between alumina refractory and CaO–CaF2–SiO2–Al2O3–MgO–MnO slags10.1111/jace.13570 ↗
46. Stress–strain behaviour and degradation mechanism of low–carbon MgO–C refractories at 900–1100° C: role of TiB2–BN–AlN waste10.1016/j.jeurceramsoc.2024.116859 ↗
47. Corrosion mechanism of novel MgO–Al3BC3 refractories in contact with converter slag10.1016/j.corsci.2024.111833 ↗
48. Effect of Al2O3, MgO and SiO2 on sintering and hydration Behaviors of CaO ceramics
49. Zhou · 2004
50. Vapor-phase hydration of Submicrometer CaO particles10.1111/j.1151-2916.1981.tb09579.x ↗
51. Kinetics of the CaO/ca (OH) 2 hydration/dehydration reaction for thermochemical energy storage applications10.1021/ie404246p ↗
52. A thermodynamic and kinetic study of the de-and rehydration of ca (OH) 2 at high H2O partial pressures for thermo-chemical heat storage10.1016/j.tca.2012.03.003 ↗
53. Effect of CaO content on hydration rates of ca-based sorbents at high temperature10.1016/j.fuproc.2007.09.009 ↗
54. Comparative kinetic analysis of CaCO3/CaO reaction system for energy storage and carbon capture10.3390/app9214601 ↗
55. Solid state sintering of lime in presence of La 2 O 3 and CeO 210.1007/BF02706767 ↗