Unveiling discharge dynamics through 1D modeling and structural analysis of VS4/rGO/S cathode in room temperature sodium sulfur battery
Source abstract
Abstract
Room-temperature sodium-sulfur (RT-Na/S) batteries offer a promising alternative to lithium-ion systems because of their high theoretical energy density and inexpensive raw materials. Practical application is limited by slow sodium-ion transport, polysulfide shuttling, and insulating discharge products that causes capacity fading. In this work, a VS 4 /rGO/S composite cathode was synthesized to overcome these drawbacks, coupling the strong chemical affinity of vanadium sulfide toward polysulfides with the high conductivity and structural compliance of reduced graphene oxide. Comprehensive material characterization confirmed successful composite formation such as XRD and Raman confirmed phase composition. SEM and HRTEM confirmed a layered morphology with high surface area, XPS confirmed V–O and C–S interactions, TGA confirmed 62.5 wt% sulfur content, and BET analysis confirmed mesoporosity. EIS showed a high charge transfer resistance, indicating transport restrictions, whereas electrochemical measurements showed an initial discharge capacity of 908 mAh g −1 at 0.1C. A 1D multiphysics model was developed in COMSOL to explain these behaviours, and it predicted voltage–capacity profiles at 0.1 and 0.2C. Discharge dynamics such Na + depletion, polysulfide accumulation, Na 2 S precipitation, and rate-dependent capacity loss were predicted by the model with significant accuracy. The simulated trends corresponded with the experimental observations, which emphasized transport-limited performance at higher discharge rates. This combined experimental–modeling research explains discharge mechanisms in RT-Na/S systems and offers valuable guidance for cathode design improvements and mitigation of rate-dependent performance losses.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermal Expansion and Ionic Conductivity · Advanced Battery Materials and Technologies · Solid-state spectroscopy and crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Electrolytes/interphases: enabling distinguishable sulfur redox processes in room‐temperature sodium‐sulfur batteries10.1002/aenm.202103304 ↗
2. Review and prospects for room-temperature sodium-sulfur batteries10.1080/21663831.2022.2092428 ↗
3. An extremely high surface area mesoporous‐microporous‐networked pillared carbon for high stability Li‐S and Intermediate Temperature Na‐S Batteries10.1002/slct.201701874 ↗
4. Sodium and sodium‐ion batteries: 50 years of research10.1002/aenm.201703137 ↗
5. H. Ye, Y. Li, Room‐temperature metal–sulfur batteries: what can we learn from lithium–sulfur?, InfoMat 4 (5) (2022) e12291, https://doi:10.1002/inf2.12291.10.1002/inf2.12291 ↗
6. A Mo5N6 electrocatalyst for efficient Na2S electrodeposition in room-temperature sodium-sulfur batteries10.1038/s41467-021-27551-7 ↗
7. Room temperature sodium-sulfur batteries as emerging energy source
8. Navigating the intricacies: a critical review of numerical modeling in battery research and design10.1016/j.jpowsour.2024.235902 ↗
9. A comparison between physics-based Li-ion battery models10.1016/j.electacta.2024.144360 ↗
10. Boosting electrochemical kinetics of S cathodes for room temperature Na/S batteries10.1016/j.matt.2021.03.004 ↗
11. Polysulfide shuttle study in the Li/S battery system10.1149/1.1806394 ↗
12. A zero-dimensional model of lithium–sulfur batteries during charge and discharge10.1039/C5CP05755H ↗
13. K. Kumaresan, Y. Mikhaylik, R.E. White, A mathematical model for a lithium–sulfur cell, J. Electrochem. Soc. 155 (8) (2008) A576, https://doi:10.1149/1.2937304.10.1149/1.2937304 ↗
14. Analysis of a Mathematical Model of Lithium-Sulfur Cells Part III: Electrochemical Reaction Kinetics, Transport Properties and Charging10.1016/j.electacta.2014.06.033 ↗
15. Modelling transport-limited discharge capacity of lithium-sulfur cells10.1016/j.electacta.2016.10.032 ↗
16. Modeling of lithium-sulfur batteries incorporating the effect of Li2S precipitation10.1016/j.jpowsour.2016.10.063 ↗
17. Mechanistic modeling of polysulfide shuttle and capacity loss in lithium–sulfur batteries10.1016/j.jpowsour.2014.02.082 ↗
18. Mathematical modeling of the charging process of Li-S batteries by incorporating the size-dependent Li2S dissolution10.1016/j.electacta.2018.11.159 ↗
19. Lithium storage performance and mechanism of VS4/rGO as an electrode material associated with lithium-sulfur batteries10.1016/j.jallcom.2019.01.253 ↗
20. Sodium-ion diffusion and charge transfer kinetics of sodium-ion hybrid capacitors using bio-derived hierarchical porous carbon10.1016/j.electacta.2018.08.029 ↗
21. Capacity Enhancement and Discharge Mechanisms of Room‐Temperature Sodium–Sulfur Batteries10.1002/celc.201402112 ↗
22. Discharge reaction mechanism of room-temperature sodium–sulfur battery with tetraethylene glycol dimethyl ether liquid electrolyte10.1016/j.jpowsour.2011.01.109 ↗
23. Insight into the discharge products and mechanism of room-temperature sodium–sulfur batteries: a first-principles study10.1021/acs.jpcc.8b10858 ↗
24. Conversion mechanism of sulfur in room-temperature sodium-sulfur battery with carbonate-based electrolyte10.1016/j.ensm.2024.103388 ↗
25. Constructing VS4 nanorods anchored on reduced graphene oxide surface to enhance rate capability as sodium-ion battery anode10.1016/j.matlet.2022.133301 ↗
26. Vanadium sulfide on reduced graphene oxide layer as a promising anode for sodium ion battery. ACS applied materials & interfaces10.1021/acsami.5b06385 ↗
27. Stabilizing intermediate phases via efficient entrapment effects of layered VS4/SnS@ C heterostructure for ultralong lifespan potassium‐ion batteries10.1002/adfm.202103802 ↗
28. Polyaniline-coated VS4@ rGO nanocomposite as high-performance cathode material for magnesium batteries based on Mg 2+/Li+ dual ion electrolytes10.1007/s11581-019-03239-3 ↗
29. VS2/rGO hybrid nanosheets prepared by annealing of VS4/rGO10.1016/j.jssc.2014.06.031 ↗
30. Synthesis and characterization of patronite form of vanadium sulfide on graphitic layer10.1021/ja403232d ↗
31. Q. Li, X. Zhao, Z. Zhang, X. Xun, B. Zhao, L. Xu, Z. Kang, Q. Liao, Y. Zhang, Architecture design and interface engineering of self-assembly VS4/rGO heterostructures for ultrathin absorbent, Nano-Micro Letters. 14 (1) (2022) 67, https://doi:10.1007/s40820-022-00809-5.10.1007/s40820-022-00809-5 ↗
32. Self-coupled nickel sulfide@ nickel vanadium sulfide nanostructure as a novel high capacity electrode material for supercapattery10.1016/j.apsusc.2019.143778 ↗
33. Vanadium sulfide decorated at carbon matrix as anode materials for “fast-charging” lithium-ion batteries10.1016/j.jallcom.2024.175490 ↗
34. Vanadium sulfides interwoven nanoflowers based on in-situ sulfurization of vanadium oxides octahedron on nickel foam for efficient hydrogen evolution10.1016/j.apsusc.2017.06.218 ↗
35. The chemistry of graphene oxide10.1039/B917103G ↗
36. Reduced graphene oxide wrapped sulfur nanocomposite as cathode material for lithium sulfur battery10.1016/j.ceramint.2020.10.215 ↗
37. An integrated approach to configure rGO/VS4/S composites with improved catalysis of polysulfides for advanced lithium–sulfur batteries10.1016/j.cclet.2021.11.046 ↗
38. Facile scalable synthesis of graphene oxide and reduced graphene oxide: comparative investigation of different reduction methods10.1007/s42823-022-00335-9 ↗
39. Nanoarchitectonics for mesoporous materials10.1246/bcsj.20110162 ↗
40. Challenges and prospects of Lithium–Sulfur Batteries10.1038/natrevmats.2016.103 ↗
41. Z. Dai, U. Mani, H.T. Tan, Q. Yan, Advanced cathode materials for sodium‐ion batteries: what determines our choices?, Small Methods 1 (5) (2017) 1700098, https://doi:10.1002/smtd.201700098.10.1002/smtd.201700098 ↗
42. Ionic liquid based electrolytes for sodium-ion batteries: Na+ solvation and ionic conductivity10.1016/j.jpowsour.2013.06.153 ↗
43. Z. Tian, Y. Zou, G. Liu, Y. Wang, J. Yin, J. Ming, H.N. Alshareef, Electrolyte solvation structure design for sodium ion batteries, Adv. Sci. 9 (22) (2022) 2201207, https://doi:10.1002/advs.202201207.10.1002/advs.202201207 ↗
44. Designing electrolytes with high solubility of sulfides/disulfides for high-energy-density and low-cost K-Na/S batteries10.1038/s41467-024-51905-6 ↗
45. Quantifying the effect of electronic conductivity on the rate performance of nanocomposite battery electrodes10.1021/acsaem.0c00034 ↗
46. C. Michaelis, N. Erisen, D. Eroglu, G.M. Koenig Jr., Electrochemical performance and modeling of lithium‐sulfur batteries with varying carbon to sulfur ratios, Int. J. Energy Res. 43 (2) (2019) 874–883, https://doi:10.1002/er.4318.10.1002/er.4318 ↗