Calcium stannate dielectrics compacted by spark plasma sintering
Source abstract
Abstract
• CaSnO 3 powder sintered via Spark plasma sintering to make high-quality dielectrics. • The resulting compacts offer an inorganic material with promising electrical behavior: ε r = 28.2; tan(δ) = 0.036 and TCC = 26 ppm/K at 1 MHz. • The system contained oxygen vacancies and certain degree of valency change on Sn. The positively charged O-vacancies and negatively charged Sn ions partly compensated their role in a high-frequency polarization and therefore the low thermal coefficient of capacitance (TCC) was achieved. The aim of this work was to sinter calcium stannate dielectric ceramics, CaSnO 3 , via spark plasma sintering (SPS). The material is difficult to sinter, mainly because of Sn volatility. A semi-commercial powder product was consolidated into a form of bulk discs by SPS. As the main variable parameter, the hot-compaction pressure varied from 30 MPa to 80 MPa. The as-sintered bulks were studied by microscopy, phase analysis, X-ray photoelectron spectroscopy and microhardness. The samples were covered with electrodes and dielectric parameters were measured, including DC resistance. Relative permittivity and loss tangent values for the frequency range 1 kHz to 1 MHz and the temperature range 30 °C to 200 °C were very stable with no relaxation. Connections between the sintering parameters, microstructure and dielectric characteristics were found. Samples sintered at the pressure over 30 MPa behaved like reliable dielectrics. A novel approach to sintering of very promising dielectrics was developed: The sample sintered at 1300 °C using 50 MPa pressure exhibited very interesting values, ε r = 28.2; tan(δ) = 0.036 and thermal coefficient of capacitance TCC = 26 ppm/K at 1 MHz. The influence of vacancies and ion valence modifications was discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic and Structural Properties of Oxides · Ferroelectric and Piezoelectric Materials · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Synthesis, processing and microstructural characterization of CaSnO3 and SrSnO3 ceramics10.1016/S0925-8388(98)00808-1 ↗
2. Photo-induced High-temperature Order-disorder Phase Transition in CaSnO3 Perovskite Revealed by Raman spectroscopy
3. Mn and Ce doping in hydrothermally derived CaSnO3 perovskite nanostructure. A facile Way to enhance optical, magnetic and electrochemical properties10.1016/j.jallcom.2021.160043 ↗
4. Structural investigations of neodymium incorporation in calcium stannate perovskite CaSnO310.1007/s00269-018-0993-7 ↗
5. Structural, Optical and Electrical Properties of CaSnO3and Ca0.98Nd0.02Sn0.98Ti0.02O3Synthesized using Sol-Gel Method10.5185/amlett.2021.031611 ↗
6. Loken · 2011
7. Structural, Photocatalytic, and Photophysical Properties of Perovskite MSnO3 (M = Ca, Sr, and Ba) Photocatalysts10.1557/jmr.2007.0259 ↗
8. Raman Spectroscopy of CaSnO3 at High Temperature: a Highly Quasi-harmonic Perovskite
9. Immittance response of CaSnO3 prepared by self-heat-sustained reaction10.1023/A:1004596519893 ↗
10. Thermal Properties of the Orthorhombic CaSnO3 Perovskite Under Pressure from Ab Initio Quasi‑harmonic Calculations10.1007/s00214-015-1765-9 ↗
11. Chemical Synthesis of Calcium Stannates from Peroxo Precursors10.1016/0921-5107(94)01188-5 ↗
12. Crystal Data for an Ilmenite Variety of Calcium Stannate CaSnO310.1107/S0021889878013369 ↗
13. Structural, optical and magnetization studies of Fe-doped CaSnO3 nanoparticles via hydrothermal route
14. Dielectric Properties of CaZrO3 Coatings Made by Plasma Spraying and Bulks Fred by Spark Plasma Sintering10.1016/j.materresbull.2020.110775 ↗
15. Electronic Components Industry Association (EIA), EIA-198-1F Ceramic Dielectric Capacitors, Classes I, II, III, IV - Part 1: Characterization and Requirements, 2002.
16. Egg Shell Powder as the Precursor for the Synthesis of Nano Crystalline Calcium Stannate (CaSnO3) with Orthorhombic Perovskite Structure: Exploration on Phase, Morphology and Antioxidant Property
17. Nitrogen Doping for Effective Enhancement of Optoelectronic Performance of ASnO3 (A-Ca, Sr, Ba) Transparent Conducting Oxides Deposited by Doctor Blade Method10.1016/j.ijleo.2023.171096 ↗
18. Higher Conductivity and Enhanced Optoelectronic Properties of Chemically Grown Nd-Doped CaSnO3 Perovskite Oxide Thin Films10.1021/acsomega.1c04054 ↗
19. Effects of the Phase Transition on the Structural, Mechanical, Electronic and Vibrational Properties of the CaSnO3Perovskite: Study Under Hydrostatic Pressure10.1016/j.jpcs.2022.110594 ↗
20. CaSnO3 obtained by modified Pechini method applied in the photocatalytic degradation of an azo dye10.1590/0366-69132017633682190 ↗
21. CaSnO3: An Electrocatalyst for 2-Electron Water Oxidation Reaction to Form H2O2
22. Time-dependent Electrical and Electroluminescence Properties of In-substituted CaSnO3 and CaSnO3:Pr Thin Films Prepared by a Chemical Solution Deposition Method10.1016/j.tsf.2023.140096 ↗
23. Diffusion Impedance of Electroactive Materials, Electrolytic Solutions and Porous Electrodes: Warburg Impedance and Beyond10.1016/j.electacta.2018.05.136 ↗
24. Preparation and Characterization of Calcium Stannate10.1007/BF00462200 ↗
25. A quantum-mechanical Investigation of Oxygen Vacancies and Copper Doping in the Orthorhombic CaSnO3Perovskite10.1039/C8CP03481H ↗