A parametric evaluation of fiber laser micro-channelling performance on thick PMMA in water medium
Source abstract
Abstract
Polymers provide superior strength-to-weight ratios, malleability, cost-effectiveness, and recyclability compared to metals and alloys, rendering them highly favoured in the domains of automobile, electrical, medicinal, and thermal engineering. The present study employs a fiber laser as an approach to generate Gaussian beam-shaped micro-channels on thick transparent PMMA material while being submerged in de-ionized water to mitigate the problems associated with infrared laser micro-channeling such as non-uniformity, combustion and region of altered properties due to heat. Micro-channel quality is assessed by measuring three key metrics: depth of cut, kerf width, and heat-affected zone. This analysis considers power, cutting speed, and pulse frequency. The laser transmission channelling experiment is conducted on PMMA employs a central composite rotatable experimental strategy. The optimal settings are set to have a depth of cut of 25.34 µm, a kerf width of 4.98 µm, and a HAZ width of 36.32 µm.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser Material Processing Techniques · Optical Coherence Tomography Applications · Nonlinear Optical Materials Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Assessment of PMMA and polystyrene based microfluidic chips fabricated using CO2 laser machining10.1016/j.apsusc.2020.147642 ↗
2. Dahotre · 2008
3. CO2 laser ablation of microchannel on PMMA substrate for effective fabrication of microfluidic chips10.3139/217.3184 ↗
4. Experimental approach to the laser machining of PMMA substrates for the fabrication of microfluidic devices10.1016/j.optlaseng.2010.11.013 ↗
5. CO2-laser micromachining of PMMA: the effect of polymer molecular weight10.1088/0960-1317/18/9/095020 ↗
6. Fabrication and characterization of poly (methylmethacrylate) microfluidic devices bonded using surface modifications and solvents10.1039/B512179E ↗
7. Femtosecond laser ablation of polymeric substrates for the fabrication of microfluidic channels10.1016/j.apsusc.2011.02.053 ↗
8. On the use of CO2 laser induced surface patterns to modify the wettability of poly (methyl methacrylate)(PMMA)10.1016/j.optlaseng.2010.01.005 ↗
9. Experimental characterization to fabricate CO2 laser ablated PMMA microchannel with homogeneous surface
10. Using orthogonal experimental method optimizing surface quality of CO2 laser cutting process for PMMA microchannels10.1007/s00170-016-8887-7 ↗
11. A cognitive approach for laser milled PMMA surface characteristics forecasting10.1016/j.optlastec.2018.12.025 ↗
12. Prediction of poly-methyl-methacrylate laser milling process characteristics based on neural networks and fuzzy data10.1016/j.procir.2016.01.029 ↗
13. Experimental investigations and modeling for multi-pass laser micro-milling by soft computing-physics informed machine learning on PMMA sheet using CO2 laser10.1016/j.optlastec.2022.108922 ↗
14. Laser cutting of polymeric materials: an experimental investigation10.1016/j.optlastec.2009.09.006 ↗
15. Experimental investigation on laser cutting of PMMA sheets: Effects of process factors on kerf characteristics10.1016/j.jmrt.2021.01.012 ↗
16. Improving laser cutting quality of polymethylmethacrylate sheet: experimental investigation and optimization10.1016/j.jmrt.2019.11.059 ↗
17. Surface roughness analysis and improvement of PMMA-based microfluidic chip chambers by CO2 laser cutting10.1016/j.apsusc.2009.09.092 ↗
18. The effects of low-frequency workpiece vibration on low-power CO2 laser cutting of PMMA: an experimental investigation10.1007/s00170-011-3881-6 ↗
19. Evaluation of cutting quality of PMMA using CO2 lasers10.1007/s00170-006-0766-1 ↗
20. A study on the surface qualities of four polymer substrate microchannels using CO2 Laser for microfluidic chip10.1142/S0218625X18501603 ↗
21. Experimental investigation of underwater laser cutting for thick stainless steel plates using a 6-kW fiber laser10.1016/j.anucene.2021.108896 ↗
22. R. Kant, A. Gupta, S. Bhattacharya, Studies on CO 2 laser micromachining on PMMA to fabricate micro channel for microfluidic applications, in: Lasers based manufacturing: 5th international and 26th all india manufacturing technology, design and research conference, AIMTDR 2014 (pp. 221-238). Springer India, 2015.10.1007/978-81-322-2352-8_13 ↗
23. Direct-write laser micromachining and universal surface modification of PMMA for device development10.1016/j.snb.2003.10.022 ↗
24. Rapid prototyping of PMMA microfluidic chips utilizing a CO 2 laser10.1007/s10404-010-0633-0 ↗
25. Investigation of dimensional accuracy in CO2 laser cutting of PMMA
26. Evaluation of cutting quality of PMMA using CO 2 lasers10.1007/s00170-006-0766-1 ↗
27. Kerf characteristics during CO2 laser cutting of polymeric materials: experimental investigation and machine learning-based prediction
28. Predicting characteristics of dissimilar laser welded polymeric joints using a multi-layer perceptrons model coupled with archimedes optimizer10.3390/polym15010233 ↗
29. Predicting kerf quality characteristics in laser cutting of basalt fibers reinforced polymer composites using neural network and chimp optimization10.1016/j.aej.2022.04.032 ↗
30. Minimization of fume emissions in laser cutting of polyvinyl chloride sheets using genetic algorithm
31. Investigation and TGRA based optimization of laser beam drilling process during machining of Nickel Inconel 718 alloy10.1016/j.jmrt.2022.02.112 ↗
32. Prediction of laser cutting parameters for polymethylmethacrylate sheets using random vector functional link network integrated with equilibrium optimizer10.1007/s10845-020-01617-7 ↗
33. Experimental investigation on laser cutting of PMMA sheets: Effects of process factors on kerf characteristics10.1016/j.jmrt.2021.01.012 ↗
34. Reducing the taper and the heat-affected zone of CFRP plate by Micro fluid assisted laser induced plasma micro-drilling10.1016/j.jmapro.2023.08.043 ↗
35. Progress in applications of laser induced cavitation on surface processing10.1016/j.optlastec.2023.110212 ↗
36. Cochran · 1977
37. Montgomery · 2017
38. Multi-objective optimisation using evolutionary algorithms: an introduction