journal article·2024-09

Synthesis and thermal characterization of pulsed laser deposited molybdenum on aluminium nitride substrates for heat sink applications

Zeinab Harajli, Malek Tabbal, Maher Soueidan, Michel Kazan, Ziad Herro, Damien Fabregue

Publisher page

Abstract

Thin films of molybdenum (Mo) were grown on aluminium nitride (AlN) substrates by pulsed laser deposition for heat sink applications. The effect of experimental growth parameters on the films’ structural properties were investigated by Scanning Electron Microscopy, X-Ray Diffraction and Atomic Force Microscopy. Thermal characterization was achieved by measuring the in-plane thermal diffusivity of the grown layers by means of a photothermal beam deflection technique using an IR heating laser. Within the experimental parameters studied in this work, a substrate temperature of 600 ˚C and an ambient argon gas pressure of 10 mTorr were identified as the optimal growth conditions for the synthesis of smooth and well-crystallized Mo layers. Concurrently, the thermal diffusivity of the films is significantly affected by film growth parameters. Under the optimal growth conditions, a thermal diffusivity value as high as 5.42x10 -5 m 2/s was measured, a value that is very close to that of bulk Mo, and which would be a result of the synthesis of polycrystalline Mo films whose grains’ size is greater than the heat carriers mean free path, namely the free electrons. The temperature dependence of the thermal diffusivity was also investigated, and the films were found to be stable up to an operating temperature of 200 °C. Beyond this temperature, photothermal beam deflection imaging shows the onset of film delamination from the underlying substrate.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal properties of materials · Metal and Thin Film Mechanics · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Interface strength damage and fracture between ceramic films and metallic substrates10.3390/ma14020353 ↗
2. Enhanced energy storage properties of a novel lead-free ceramic with a multilayer structure10.1039/C8TC02368A ↗
3. Microstructure evolution and its effect on the mechanical properties of the ZrC–SiC composite joint diffusion bonded with pure Ni foil10.1016/j.ceramint.2013.04.074 ↗
4. Evaluation of properties and FEM model of the friction welded mild steel-Al6061-alumina10.1590/S1516-14392012005000178 ↗
5. Challenges in Fusion Welding of Al alloy for Body in White
6. Mechanical behavior of AlN/Mo functionally graded materials with various compositional structures10.1016/j.jallcom.2019.152512 ↗
7. Full densification of molybdenum powders using spark plasma sintering10.1007/s11661-012-1144-2 ↗
8. Fabrication, characterization and optimization of high conductivity and high quality nanocrystalline molybdenum thin films10.1016/j.jmst.2019.05.023 ↗
9. Sputtered Mo-bilayer thin films with reduced thickness and improved electrical resistivity Mater
10. Electron microscopy studies of thin Mo films grown by MBE on (1 0 0) SrTiO3 substrates10.1016/S0039-6028(03)00996-8 ↗
11. Thermochemical analysis of molybdenum thin films on porous alumina10.1021/acs.langmuir.6b04149 ↗
12. Molybdenum thin films via pulsed laser deposition technique for first mirror application10.1017/S0263034612000560 ↗
13. Pulsed laser deposition of thin film of molybdenum
14. Laser induced thermoelastic surface displacement in solids detected simultaneously by photothermal mirror and interferometry10.1364/OE.386344 ↗
15. Photothermal displacement spectroscopy: an optical probe for solids and surfaces10.1007/BF00616610 ↗
16. Mid-IR photothermal measurement of substantial heat transport by surface waves of polar amorphous films supported on silicon10.1063/5.0015577 ↗
17. Mid-IR photothermal beam deflection technique for fast measurement of thermal diffusivity and highly sensitive subsurface imaging10.1063/1.5144174 ↗
18. Pulsed laser deposition of metals in low pressure inert gas10.1016/S0169-4332(99)00407-9 ↗
19. Pulsed laser deposition of metals in various inert gas atmospheres10.1007/s00339-004-2855-z ↗
20. Densification and thermal conductivity of Y2O3-doped AlN ceramics by spark plasma sintering10.4028/www.scientific.net/KEM.352.227 ↗
21. High-strength AlN ceramics by low-temperature sintering with CaZrO3–Y2O3 co-additives10.1016/j.jeurceramsoc.2014.05.008 ↗
22. Effects of Y2O3-LaF3 on the low temperature sintering and thermal conductivity of AlN ceramics10.1108/MI-03-2018-0016 ↗
23. Post-sputtering heat treatments of molybdenum on silicon wafer10.3390/app8091692 ↗
24. Adhesion improvement and characterization of magnetron sputter deposited bilayer molybdenum thin films for rear contact application in CIGS solar cells
25. Effect of synthesis condition on thermal diffusivity of molybdenum thin films observed by a picosecond light pulse thermo-reflectance method10.1143/JJAP.48.05EC01 ↗
26. Thermal diffusivity measurements of refractory metals as candidate reference materials by the laser flash method10.1007/s10765-005-8602-7 ↗
27. Miao, T., Ma, W., Yan, S., Zhang, X., Kohno, M., Takata, Y., Ikoma, Y. Thermal transport and thermal stress in a molybdenum film–glass substrate system. J. Vac. Sci. Technol. B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena, 34 (2), (2016) 021801. Doi: 10.1116/1.4941308.10.1116/1.4941308 ↗
28. Observation of heat diffusion across submicrometer metal thin films using a picosecond thermo-reflectance technique10.1143/JJAP.38.L1268 ↗
29. Microscale thermal characterization at temperatures up to 1000 C by photoreflectance microscopy: application to the characterization of carbon fibers10.1088/0022-3727/38/10/002 ↗