journal article·2023-04

Cobalt phosphate-based composite with wall care putty as building envelope material for thermal energy storage

Sisir Kumar Sethy, Arakshita Majhi, Gouri Sankhar Brahma, Trilochan Swain

Publisher page

Abstract

The four different thermal energy storage composites were synthesized by charging Co 3(PO 4) 2· xH 2O with wall care putty (Korean make) in aqueous media. These four different composites are abbreviated as A1, A3, A4 and A5 having composition 0.46 %, 1.00 %,1.63 % and 2.22 % of Co 3(PO 4) 2· xH 2O, respectively. Differential Scanning Calorimeter (DSC) was used to measure specific heat capacity (C P) for all above composites. Among all composites, the C P = 1.34 Jg -1K −1 is found maximum for composite A5 at 339 K in N 2 atmosphere. The highest heat storage density is also observed, 80.95 ∼ 88.83 kJ kg −1, for composite A5 in temperature range 336 K to 342 K for storing heat up to ∼ 13 min. The optical band gap (E g) is calculated using Tauc and Menth as well as Kubelka-Munk function for all composites and all found insulator. The calculated crystallite size of composite A3 is ∼ 400 nm.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Building Energy and Comfort Optimization · Architecture and Cultural Influences

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Renewable energy policies and household solid fuel dependence10.1016/j.gloenvcha.2021.102408 ↗
2. Factors determining household use of clean and renewable energy sources for lighting in Sub-Saharan Africa, Renew10.1016/j.rser.2017.01.080 ↗
3. Effect of nano TiO2 on the transport, structural and thermal properties of PEMA-NaI solid polymer electrolytes for energy storage devices10.1016/j.mseb.2022.115942 ↗
4. Toward cost-effective solar energy use10.1126/science.1137014 ↗
5. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
6. Bifunctional biomorphic SiC ceramics embedded molten salts for ultrafast thermal and solar energy storage
7. High-performance phase change material capsule by Janus particle
8. A detailed review on heat transfer rate, supercooling, thermal stability and reliability of nanoparticle dispersed organic phase change material for low-temperature applications
9. Optically-controlled long-term storage and release of thermal energy in phase-change materials10.1038/s41467-017-01608-y ↗
10. A map for phase-change materials10.1038/nmat2330 ↗
11. Highly hydrophobic silanized melamine foam for facile and uniform assembly of graphene nanoplatelet towards efficient light-to-thermal energy storage10.1016/j.mtener.2022.101077 ↗
12. Phase change materials for thermal energy storage10.1016/j.pmatsci.2014.03.005 ↗
13. Review on the temperature-dependent thermophysical properties of liquid paraffins and composite phase change materials with metallic porous structures
14. Experimental and numerical study on melting of phase change materials in metal foams at pore scale10.1016/j.ijheatmasstransfer.2014.01.003 ↗
15. Improving the thermal conductivity and shape-stabilization of phase change materials using nanographite additives10.1016/j.carbon.2012.08.068 ↗
16. A facile one-step synthesis of porous N-doped carbon from MOF for efficient thermal energy storage capacity of shape-stabilized phase change materials, Mater. Today
17. Paraffin/diatomite/multi-wall carbon nanotubes composite phase change material tailor-made for thermal energy storage cement-based composites10.1016/j.energy.2014.05.049 ↗
18. Phase change materials for energy storage nucleation to prevent supercooling10.1016/0927-0248(92)90116-7 ↗
19. Ultra-high thermal effusivity materials for resonant ambient thermal energy harvesting10.1038/s41467-018-03029-x ↗
20. Review on tailored phase change behavior of hydrated salt as phase change materials for energy storage
21. Investigation of a high-temperature packed-bed sensible heat thermal energy storage system with large-sized elements10.1115/1.4023969 ↗
22. Thermal storage of sensible heat using concrete modules in solar power plants10.1016/j.solener.2014.02.022 ↗
23. The impact of concrete structure on the thermal performance of the dual-media thermocline thermal storage tank using concrete as the solid medium10.1016/j.apenergy.2013.08.044 ↗
24. Cobalt(II) and cobalt(III) dipicolinate complexes: solid state, solution, and in vivo insulin-like properties10.1021/ic020062l ↗
25. Glycemia- lowering effect of cobalt chloride in the diabetic rat: role of decreased gluconeogenesis
26. Aqueous chemistry of ammonium (dipicolinato)oxovanadate(V): the first organic vanadium(V) insulin-mimetic compound10.1021/ic9908367 ↗
27. Isotropic proton shifts for Co(salen)10.1021/ja00431a019 ↗
28. Synthesis, characterization and micellization behaviour of some surface active mixed-ligand complexes of cobalt(III)10.1016/j.poly.2006.05.038 ↗
29. Studies on antimicrobial activity of cobalt(III) ethylenediamine complexes10.1139/w06-087 ↗
30. Cobalt(II) tetraaminotetranitrophthalocyanine and its N-acyl derivatives10.1023/A:1015370001651 ↗
31. Metal phthalocyanines with undecyloxybenzoic acid residues, and their mesomorphic properties10.1023/B:RUGC.0000025520.29732.9e ↗
32. Coboglobins: oxygen-carrying cobalt-reconstituted hemoglobin and myoglobin10.1073/pnas.67.2.637 ↗
33. Thermal application of composites of iron and magnesium in thermosyphon solar water heating system10.1002/htj.22293 ↗
34. Thermal and Optical Behavior of Novel Phosphate-Based Inorganic Mixtures Containing Fe and Na and Their Application as Solar Reflective Coating10.1115/1.4053257 ↗
35. Morphological evolution of Co phosphate and its electrochemical and photocatalytic performance10.1039/C8CE01535J ↗
36. Quantification of CaCO3–CaSO3⋅0.5H2O–CaSO4.2H2O mixtures by FTIR analysis and its ANN model10.1016/j.matlet.2003.07.008 ↗
37. Factors involved in the formation of amorphous and crystalline calcium carbonate: a study of an ascidian skeleton10.1021/ja016990l ↗
39. The Long-Wavelength Edge of Photographic Sensitivity and of the Electronic Absorption of Solids10.1103/PhysRev.92.1324 ↗
40. Relations between the Refractive Index and Energy Gap of Semiconductors10.1002/pssb.2221310202 ↗
41. On the Penn Gap in Semiconductors
42. Microwave-Assisted Synthesis of Co3(PO4)2 Nanospheres for Electrocatalytic Oxidation of Methanol in Alkaline Media10.3390/catal7040119 ↗
43. facilely synthesized highly active Pd nanoparticle electrocatalyst for electroless deposition process10.1039/C5RA17151B ↗
44. A. R. Stokes, A. J. Wilson, The difraction of X rays by distorted crystal aggregates-I Proc. Phys. Soc. (1926–1948) 56(3) (1944) 174-181. https://doi.org/10.1088/0959-5309/56/3/303.10.1088/0959-5309/56/3/303 ↗
45. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum10.1080/14786435608238074 ↗
46. Structure and colour of cobalt ceramic pigments from phosphates10.1016/j.ceramint.2006.01.024 ↗
47. Autologous Cobalt Phosphates with Modulated Coordination Sites for Electrocatalytic Water Oxidation10.1002/anie.202001737 ↗
48. UV/visible spectroscopic analysis of Co3+ and Co2+ during the dissolution of cobalt from mixed Co-Cu oxidized ores10.1007/s12613-011-0432-y ↗
49. Phosphate and sulfate containing inorganic mixture as thermal retardant: synthesis, characterization and thermal behavior10.1080/10426507.2022.2071896 ↗
50. Nickel and sodium phosphate composite with wall putty substantive as energy saving decorating material
51. Synthesis and characterization of phosphate compounds of cobalt and their composites with building coating materials and solar paint: study of energy storage and energy dissipating behavior