journal article·2019-08

Simulation and optimization of deformation near a hole in an oxide forming alloy foil subjected to thermo-mechanical cycling

Feng-Xun Li, Zhen-Zhe Li

Publisher page

Abstract

Abstract The gas turbine engines are used as the propulsion systems of the aircrafts, the vehicles or the power devices. Some components of the gas turbine engines are exposed to the high temperature environment. Therefore, durability of the components will directly affect the life cycles of the gas turbine engines. For protecting the blades of the gas turbine engines, a TBC (thermal barrier coating) system is used under the condition of combining with film cooling holes. The TBC systems can improve not only durability of the components in the high temperature environment but also the thermal efficiency of the gas turbine engines through increasing the operating temperature. In this paper, the simulation and optimization methods were studied for improving durability of the TBC systems. At first, the theoretical methods were discussed under the condition of considering the experimental data together. In the following step, the deformations near a hole under the different thermo-mechanical conditions were compared and optimized using DOE (design of experiments) method for the objective of improving durability of the TBC systems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Mechanics based scaling laws for the durability of thermal barrier coatings10.1016/S0079-6425(00)00007-4 ↗
2. Mechanisms controlling the durability of thermal barrier coatings10.1016/S0079-6425(00)00020-7 ↗
3. Progress update on failure mechanisms of advanced thermal barrier coatings: a review10.1016/j.porgcoat.2015.09.019 ↗
4. Review of suspension and solution precursor plasma sprayed thermal barrier coatings10.1016/j.ceramint.2016.06.063 ↗
5. Modeling of thermal properties and failure of thermal barrier coatings with the use of finite element methods: a review10.1016/j.jeurceramsoc.2015.12.038 ↗
6. Characterization of a cyclic displacement instability for a thermally grown oxide in a thermal barrier system10.1016/S1359-6454(01)00071-4 ↗
7. Determination of the growth stress and strain in-al2o3 scales during the oxidation of Fe-22Cr-4.8Al-0.3Y alloy10.1016/S1359-6454(97)00306-6 ↗
8. Evolution of surface morphology of thermo-mechanically cycled NiCoCrAlY bond coats10.1016/j.msea.2006.07.048 ↗
9. On the failure mechanisms of thermal barrier coatings with diffusion aluminide bond coatings10.1016/j.msea.2004.11.038 ↗
10. Wrinkling α-Alumina films grown by thermal oxidation – Ⅰ. Quantitative studies on single crystals of Fe-Cr-Al alloy10.1016/S1359-6454(98)00133-5 ↗
11. A fundamental model of cyclic instabilities in thermal barrier systems10.1016/S0022-5096(02)00003-0 ↗
12. A model study of displacement instabilities during cyclic oxidation10.1016/S1359-6454(01)00403-7 ↗
13. Failure analysis of a gas turbine blade made of Inconel 738LC alloy10.1016/j.engfailanal.2004.10.002 ↗
14. Material testing for fatigue design for heavy-duty gas turbine blading with film cooling10.1016/S1566-1369(99)80038-7 ↗
15. Advanced thermal gradient mechanical fatigue testing of CMSX-4 with an oxidation protection coating10.1016/j.ijfatigue.2007.01.034 ↗
16. On TGO creep and the initiation of a class of fatigue cracks in thermal barrier coatings10.1016/j.surfcoat.2009.05.018 ↗
17. On stresses induced in a thermal barrier coating due to indentation testing10.1016/j.commatsci.2008.07.037 ↗
18. Effects of creep-plastic behavior on stress development in TBCs during cooling10.1016/j.ceramint.2017.05.338 ↗
19. Creep properties of a thermally-grown alumina10.1016/j.msea.2007.05.114 ↗
20. High temperature creep and tensile properties of alumina formed on Fecralloy foils doped with yttrium10.1016/j.jeurceramsoc.2008.05.051 ↗
21. Deformation and cracking near a hole in an oxide forming alloy foil subjected thermal cycling10.1016/j.actamat.2012.09.077 ↗
22. Deformation and cracking near a hole in an oxide forming alloy foil subjected to thermal cycling. Part II: Effects of remotely applied stress10.1016/j.actamat.2013.01.054 ↗
23. Multi-objective global optimization for deformation near a hole in an oxide forming alloy foil subjected to thermal cycling
24. Optimal design of deformation near a hole in an oxide forming alloy foil under thermal cycling using Taguchi method10.1016/j.ijfatigue.2018.06.026 ↗