Measurements of synthesized graphene oxides electrophoresed deposition for ultrasensitive humidity detection
Source abstract
Abstract
Abstract Two types of synthesized graphene oxide (GO) were electrophoresed using various reductants and temperature controls on the Au electrode of a quartz crystal microbalance (QCM) device for humidity detection. Characteristics of the synthesized GO, its surface morphology, and its functional groups were investigated by SEM images based on EDS and Fourier transform infrared spectra (FTIR). Structure and lattice were clear resolved using 80 kV field emission gun TEM (FEG-TEM) and electron diffraction (SAED), respectively. The resonant frequency and impedance were complementary utility to illustrate the sensitivity of various GO loaded QCM sensors. The kinetic parameters of the adsorption-desorption at a related humidity of 23–95% were extracted using the Langmuir isotherm model. In this experiment, the GOTC synthesized by a strong reductant NaNO3 and temperature control was demonstrated to exhibit excellent humidity sensing sensitivity with a fast absorption-desorption rate, making it a potential candidate for moisture detection.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Acoustic Wave Resonator Technologies · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Flexibility and electrical and humidity-sensing properties of diamine-functionalized graphene oxide films10.1016/j.snb.2015.01.089 ↗
2. A nanowire WO3 humidity sensor integrated with micro-heater and inverting amplifier circuit on chip manufactured using CMOS-MEMS technique10.1016/j.snb.2006.10.055 ↗
3. Rapid detection of fibrinogen and fibrin degradation products using a smart QCM-sensor10.1016/j.snb.2004.02.057 ↗
4. An ultrasensitive quartz crystal microbalance-micropillars based sensor for humidity detection10.1063/1.4880316 ↗
5. Microfluidic quartz-crystal-microbalance (QCM) sensors with specialized immunoassays for extended measurement range and improved reusability10.1016/j.mee.2017.04.023 ↗
6. Integration of core/shell nanoparticle and QCM-D sensors in a single device: a new approach to the in situ detection of solvent content in thin adsorbed films with minimized response to spurious bulk refractive index changes10.1016/j.snb.2017.05.075 ↗
7. The use of quartz oscillators for weighing thin layers and for microweighing10.1007/BF01337937 ↗
8. Soft-chemical synthesis, characterization and humidity sensing behavior of WO3/TiO2 nanopowder10.1016/j.snb.2013.08.053 ↗
9. Quartz crystal microbalance coated with carbon nanotube films used as humidity sensor10.1016/j.sna.2004.11.032 ↗
10. Detection of explosive vapors by surface acoustic wave sensors containing novel siloxane based coatings10.1080/10601325.2010.518831 ↗
11. Resonant frequency function of thickness shear vibrations of rectangular crystal plates10.1109/TUFFC.2011.1911 ↗
12. Synthesis of graphene-based nanosheets via chemicalreduction of exfoliated graphene oxide10.1016/j.carbon.2007.02.034 ↗
13. Facilely prepared composites of polyelectrolytes and graphene as the sensing materials for the detection of very low humidity10.1016/j.snb.2013.12.080 ↗
14. Humidity-sensing properties of chemically reduced graphene oxide/polymer nanocomposite film sensor based on layer-by-layernano self-assembly10.1016/j.snb.2014.02.078 ↗
15. Environment-friendly method to pro-duce graphene that employs vitamin C and amino acid10.1021/cm902635j ↗
16. Electric field effect in atomically thin carbon films10.1126/science.1102896 ↗
17. Investigation of structural and electronic properties of graphene oxide10.1063/1.3607305 ↗
18. Atomic and electronic structure of graphene oxide10.1021/nl8034256 ↗
19. Tunable electrical conductivity of individual graphene oxide sheets reduced at “low” temperature10.1021/nl8019938 ↗
20. Formation and decomposition of CO2 intercalated graphene oxide10.1021/cm203223z ↗
21. An improved hummers method for eco-friendly synthesis of graphene oxide10.1016/j.carbon.2013.07.055 ↗
22. Identification of functional groups and determination of carboxyl formation temperature in graphene oxide using the XPS O 1s spectrum10.1016/j.tsf.2015.07.051 ↗
23. Phase change behaviors of PEG on modified graphene oxide mediated by surface functional groups10.1016/j.eurpolymj.2015.10.027 ↗
24. Contact angle hysteresis on graphene surfaces and hysteresis-free behavior on oil-infused graphite surfaces10.1016/j.apsusc.2016.05.059 ↗
25. Above 170∘ water contact angle and oleophobicity of fluorinated graphene oxide based transparent polymeric films10.1016/j.carbon.2014.12.004 ↗
26. A study of a QCM sensor based on pentacene for the detection of BTX vapors in air10.1016/j.snb.2016.09.097 ↗
27. High-frequency phase shift measurement greatly enhances the sensitivity of QCM immunosensors10.1016/j.bios.2014.10.001 ↗
28. Novel QCM humidity sensors using stacked black phosphorus nanosheets as sensing film10.1016/j.snb.2017.01.010 ↗
29. Facile development of high performance QCM humidity sensor based on protonated polyethylenimine-graphene oxide nanocomposite thin film10.1016/j.snb.2016.01.105 ↗
30. Humidity adsorption kinetics of water soluble calix[4]arene derivatives measured using QCM technique10.1016/j.snb.2009.11.040 ↗
31. Humidity sensing properties of ZnO nanoparticles synthesized by sol–gel process10.1016/j.snb.2009.11.051 ↗
32. Impedance analysis of quartz crystal microbalance humidity sensors based on nanodiamond/graphene oxide nanocomposite film10.1016/j.snb.2014.12.134 ↗
33. Influence of the oxygen content on the humidity sensing properties of functionalized graphene films based on bulk acoustic wave humidity sensors10.1016/j.snb.2015.08.121 ↗