journal article·2003-01

Adhesion properties of MgO–ZrO2 insulation coatings for 5 Tesla HTS coils

E Celik, E Avci, Y.S Hascicek

Publisher page

Abstract

Abstract Self insulating substrate tapes (SIST) is the most promising insulation technique for high temperature MgO–ZrO 2 coatings on Ag and AgMg sheathed Bi 2 Sr 2 Ca 1 Cu 2 O x (Bi-2212) superconducting tapes and wires in applications of HTS/LTS coils and magnets. We have already reported successful results as to the synthesis, characterizations and applications of the insulation coatings using the SIST. In order to provide no electrical short circuit in J c measurements of HTS/LTS coils, the bonding of the coatings onto the substrate is a very important issue. In this present research, the adhesion properties of high temperature MgO–ZrO 2 coatings were scrutinized for different processing parameters. Lap joints were fabricated by laying fresh sol–gel coated silver tape samples over each other and then by heat-treating at temperature range of 500–800 °C for several times in air. These joint samples were pulled to failure by using a mini tensile tester. MgO–ZrO 2 was coated on Ag tapes by sol–gel process using Mg and Zr based precursors. The obtained results obviously pointed out that the best Mg precursor is Mg(C 5 H 7 O 2 )·2H 2 O to prepare solution and there is a strong relationship between film growth and adhesion properties. Also, MgO content in ZrO 2 increased its bonding strength. The optimum heat treatment conditions are 600 °C and 15 min for best bonding for these high temperature insulation coatings on HTS tape conductor. The failure mode of all samples was in the form of a mixed type interfacial/cohesive defects in MgO–ZrO 2 coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Physics of Superconductivity and Magnetism · Superconducting Materials and Applications · Spacecraft and Cryogenic Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. E. Celik, I.H. Mutlu, Y.S. Hascicek, High temperature compatible for superconductors and method of applying insulation to conductors (self-insulating substrate tapes (SIST), USA Patent, Patent number: 6344287; Issued Date: Feb. 5, 2002.10.1016/S0921-4534(01)01078-4 ↗
2. MgO–ZrO2 insulation coatings on Ag/AgMg sheathed Bi-2212 superconducting tapes by sol–gel technique10.1007/978-1-4615-4293-3_37 ↗
3. Development of 3 T class Bi-2212 insert coils for high field NMR10.1109/77.783358 ↗
4. Y2O3–ZrO2 insulation coatings on AgMg sheathed Bi-2212 superconducting tapes by sol–gel technique10.1109/77.828481 ↗
5. Electrical properties of high temperature insulation coatings by sol–gel method for magnet technology10.1109/77.828484 ↗
6. Electrical characterization of ceramic insulation coatings for magnet technology10.1109/77.919664 ↗
7. Ceramic insulation for Nb3Sn wires and magnets10.1016/S0921-4534(01)01079-6 ↗
8. High temperature sol–gel insulation coatings for HTS magnets and their adhesion properties10.1016/S0921-4534(00)00375-0 ↗
9. Evaluation of adhesive strength of sol–gel ceramic insulation for HTS magnets10.1109/77.784834 ↗
10. E. Celik, Ph.D. Thesis, Sakarya University, 2000.
11. High voltage breakdown capabilities of high temperature insulation coatings for HTS and LTS conductors10.1063/1.1472553 ↗
12. High temperature insulation coatings and their electrical properties for HTS/LTS conductors10.1016/S0921-4534(01)01078-4 ↗
13. Brinker · 1990 · 839
14. C.C. Berndt, C.K. Lin, Measurement of adhesion for thermally sprayed materials Adhesion Measurement of Films and Coatings, first ed., vol. 1. Utrecht, The Netherlands. 41–70, 1995.10.1515/9783112318966-004 ↗
15. Preparation and characterization of zirconium oxide coatings prepared from ZrCl2(OC2H5)2 by the sol–gel process
16. Alkoxy-derived Y2O3-stabilized ZrO2 thin films10.1016/0040-6090(94)90076-0 ↗
17. Sol–gel based precursors for manufacturing refractory oxide fibers10.1007/BF00376279 ↗
18. E.Celik, E. Avci, W.Sigmund, Y.S. Hascicek, CeO2–ZrO2 insulation coatings on Ag/AgMg sheathed Bi-2212 superconducting tapes by the sol–gel process for magnet technology, K.L. Mittal (Ed.) ISBN 90-6764-182-0, IEEE Transactions on Applied Superconductivity, 12 (2002) 1223–1226.
19. E. Celik, E. Avci, Y.S. Hascicek, Synthesis and characterization of high temperature compatible ZrO2 insulation coatings on Ag/AgMg Sheathed Bi-2212 Wires and Tapes, Surface and Coating Technology, 161 (2002) 355–360.10.1016/S0257-8972(02)00475-9 ↗
20. F.Ustel, E. Celik, E.Avci, Investigation on adhesive strengths of plasma sprayed coating, Proceedings of the Eighth International Metallurgy and Materials Congress,1153–1161, June 6–9 1995, Istanbul, Turkey.
21. ASTM Standard 633–679, Standard Test Method for Adhesion Strength of Flame-Sprayed Coatings, 1999.
22. Ramm · Journal de Physique · 1993 · 3
23. Characterization and tribological investigation of Al2O3 and modified Al2O3 sol–gel films10.1016/S0025-5408(01)00673-0 ↗
24. E. Celik, Y.S. Hascicek, Evaluation of adhesive strength of sol–gel ceramic insulation for HTS magnets, NHMFL 1998 Annual Report Vol. 1, 89–90, January 1999, Tallahassee, USA.10.1109/77.784834 ↗