journal article·2007-03

Dipole potential barrier simulation model for studying polar polymers

A.A. Hashim, Jan Evans-Freeman, A.A. Hassan, M.T. Mohammad

Publisher page

Abstract

Thin layers of amorphous PMA, PMMA, PM alpha Cl and PVAc were prepared using a spray pyrolysis technique. The dielectric loss epsilon '' of each polymer was measured as a function of temperature in the range 20-160 degrees C, at a fixed frequency of 1 kHz using a thick layer of polymer (48-61 mu m) as a capacitor dielectric material. The maximum alpha-relaxation peak value of epsilon ''(PMA) = 0.65 was observed at T-0 = 36 degrees C, epsilon ''(PMMA) = 0.26 at T-0 = 65 degrees C, epsilon ''(PM alpha Cl) = 0.45 at T-0 = 140 degrees C and epsilon ''(PVAc) = 1.6 at T-0 = 75 degrees C. The potential energy U between the stable levels of the dipoles was calculated from the dipole relaxation time and simulated using a polynomial fitting method. The experimental result obtained indicates the energy band shape. The maximum value of U obtained was U(PMA) = 2 eV, U(PMMA) = 0.38 eV, U(PM alpha Cl) = -0.85 eV, and U(PVAc) = -1.4 eV. The positive and negative sign indicates the dipole direction with respect to electric field direction (within the field direction or in the opposite direction). A theoretical model for epsilon '' was developed for each polymer using the value of U obtained at the dielectric response regions (gamma, beta, and alpha) and compared with the experimental results. The maximum alpha-relaxation theoretical peak value of epsilon ''(PMA) was observed at T=45 degrees C, epsilon ''(PMMA) at T= 80 degrees C, epsilon ''(PM alpha Cl) at T= 150 degrees C and epsilon ''(PVAc) at T-0 = 83 degrees C, with a polynomial fitting error P = (-9 to -15 degrees C). (c) 2007 Published by Elsevier B.V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dielectric materials and actuators · High voltage insulation and dielectric phenomena · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Mort · 1982
2. Blythe · 1980
3. Hiie · Thin Solid Films · 2006 · 511/512 · 44310.1016/j.tsf.2005.11.070 ↗
4. Mohammad · Solid State Commun. · 1989 · 72 · 104310.1016/0038-1098(89)90624-8 ↗
5. Senturia · Adv. Polym. Sci. · 1980 · 80 · 3
6. Nixdorf · Compos. Sci. Technol. · 2001 · 61 · 88910.1016/S0266-3538(00)00174-3 ↗
7. Bistac · Progr. Org. Coat. · 1997 · 31 · 34710.1016/S0300-9440(97)00093-3 ↗
8. Bistac · Int. J. Adhes. Adhes. · 1997 · 17 · 19710.1016/S0143-7496(97)00001-8 ↗
9. Hashim · Indian J. Pure Appl. Phys. · 1997 · 35 · 544
10. Smith · 1955
11. McCrum · 1967
12. Boyer · Rubb. Chem. Technol. · 1982 · 36 · 130310.5254/1.3539649 ↗
13. Shetter · J. Polym. Sci. B · 1963 · 1 · 20910.1002/pol.1963.110010503 ↗
14. Utte · Polymer · 1995 · 36 · 141510.1016/0032-3861(95)95919-R ↗
15. Kalogeras · Acta Mater. · 2005 · 53 · 162110.1016/j.actamat.2004.12.012 ↗
16. Kalogeras · Mater. Res. Innov. · 2001 · 4 · 32210.1007/s100190000111 ↗
17. Wübbenhorst · Eur. Phys. J. E · 2003 · 12 · 25
18. Spevacek · Adv. Colloid Interface Sci. · 1987 · 27 · 8110.1016/0001-8686(87)85010-8 ↗
19. Bosscher · Macromolecules · 1982 · 15 · 144210.1021/ma00233a045 ↗