journal article·2000-05

Void formation in titanium desilicide/p+ silicon interface: impact on junction leakage and silicide sheet resistance

K.L Pey, R Sundaresan, H Wong, S.Y Siah, C.H Tung

Materials Science and Engineering: B· Volume 74· Issue 1-3
Publisher page

Abstract

We have observed the formation of voids at the interface of TiSi 2 /p + -Si after the titanium-salicidation process in a deep-sub-micron CMOS technology. In our study, most of the voids occurred at the intersection of the polycrystalline TiSi 2 grain boundary with the p + Si substrate and had an extended defect into the p + Si substrate. In some cases, for voids that were not located at the TiSi 2 grain boundary, the substrate defects extended from the void/p + -Si interface into the silicide film, resulting in micro-twin defects. In addition, discrete and isolated defects were found at the bird's beak tips, which are most likely due to dislocation loops. However, its density was very low. Our investigation shows that void formation is relatively sensitive to the BF 2 + implant and p + junction annealing temperature, and can be completely avoided by subjecting the p + junctions to a high temperature anneal at 850°C for 45 min prior to the salicidation process. We attribute these voids to the fluorine-related precipitates, in which the fluorine is from the BF 2 + ion implantation. It is believed that the formation of substrate defects is the root cause of high junction leakage observed in the pMOSFET devices, and the leakage can be substantially reduced by 1-2 orders of magnitude with the extra high temperature anneal. On top of that, the distribution of the sheet resistance of the Ti-salicided p + -Si becomes tighter.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Silicon and Solar Cell Technologies · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. Liauh · Nucl. Instrum. Methods Phys. Res. · 1993 · B74 · 13410.1016/0168-583X(93)95030-9 ↗
2. Lur · J. Appl. Phys. · 1989 · 66 · 360410.1063/1.344067 ↗
3. Chen · J. Appl. Phys. · 1992 · 71 · 65310.1063/1.351350 ↗
4. Chen · Nucl. Instrum. Methods Phys. Res. · 1997 · B121 · 23110.1016/S0168-583X(96)00582-4 ↗
5. H.N. Chua, K.L. Pey, S.Y. Siah, E.H. Lim, C.S. Ho, Line-width dependence of void formation in Ti-salicided BF2-doped polysilicon lines. Presented at MRSS 99 Spring Meeting, San Francisco, CA, April 5–9, 1999.10.1557/PROC-564-91 ↗
6. H.N. Chua, K.L. Pey, S.Y. Siah, L.Y. Ong, E.H. Lim, C.L. Gan, K.H. See, C.S. Ho, Impact of voids in Ti-salicided p+ polysilicon lines on TiSi2 electrical properties, Proceedings of the 7th International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA’99), 1999, pp. 44–49.10.1109/IPFA.1999.791302 ↗
7. C.W. Lim, H. Gong, A.J. Bourdillon, K.H. Lee, K.L. Pey, S.K. Lahiri, Incorporating of APM-clean step in Ti-salicide process: a method to achieve high yield in silicided logic devices, Proceedings of the 15th VLSI Multi-level Interconnect Conference (VMIC), 1998, pp. 278–280.
8. W.S. Lau, P.W. Qian, R. Zhao, A new mechanism of leakage current in ultra-shallow junctions with TiSi2 contacts, Proceedings of the 6th International Symposium on the Physical and Failure Analysis of Integrated Circuits, IPFA’97, 1997, pp. 207–212.
9. K. Gota, J. Watanabe, T. Sukegawa, A. Fushida, T. Sakuma, T. Sugii, A comparative study of leakage mechanism of Co and Ni salicide process, Proceedings of IRPS, 1998.10.1109/RELPHY.1998.670670 ↗