Fabrication of near-field optical probes using advanced functional thin films for MEMS and NEMS applications
Source abstract
Abstract
Abstract Highly efficient atomic force microscopy (AFM) cantilevers and an near-field scanning optical microscopy (NSOM) aperture array were fabricated using the functional Si 3 N 4 and SiO 2 thin films for the micro electro mechanical systems (MEMS) and NEMS applications. In order to generate the cantilevers and array, a silicon nitride (Si 3 N 4 ) thin film with a stress below 100 MPa was deposited using NH 3 and SiCl 2 H 2 gases with a relative ratio of 1:5 at 140 mTorr, and 835 °C by low pressure chemical vapor deposition (LPCVD). Cantilevers of 10–100 μm in length were fabricated with Si 3 N 4 thin films. Photolithography and magnetically enhanced reactive ion etching (MERIE) techniques were employed for patterning the Si 3 N 4 thin films and selective bulk etching of Si was carried out using a strong alkaline solution of tetramethylammoniumhyroxide (TMAH) to generate the Si 3 N 4 -based cantilevers with 3D shapes. In addition, we also successfully fabricated an array of SiO 2 apertures with sub-wavelength sizes as near-field optical probe in order to examine the possible light resonance-tunneling phenomenon. Initially, a (50 × 50) array with a dimension of (5 mm × 5 mm) was fabricated on a Si wafer followed by the V-groove formation using alkaline solution Si bulk micromachining technology. The size of the aperture on top of the pyramidal array was carefully controlled with an opening rate of ∼27 nm/min using HF solution diluted by a factor of 50 using water. The Al thin film was thermally evaporated on the (50 × 50) array pattern for the fabrication of apertures with sub-wavelength sizes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Near-Field Optical Microscopy · Force Microscopy Techniques and Applications · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Meyer · Appl. Phys. Lett. · 1991 · 53 · 104510.1063/1.100061 ↗
2. Linnemann · Thin Solid Films · 1995 · 264 · 15910.1016/0040-6090(94)05829-6 ↗
3. Binnig · Helv. Phys. Acta · 1982 · 55 · 726
4. Binnig · Phys. Rev. Lett. · 1986 · 56 · 93010.1103/PhysRevLett.56.930 ↗
5. Ash · Nature · 1972 · 237 · 51010.1038/237510a0 ↗
6. Betzig · Appl. Phys. Lett. · 1987 · 51 · 208810.1063/1.98956 ↗
7. Betzig · Science · 1992 · 257 · 18910.1126/science.257.5067.189 ↗
8. Betzig · Science · 1993 · 262 · 142210.1126/science.262.5138.1422 ↗
9. Fischer · Appl. Phys. Lett. · 1988 · 52 · 24910.1063/1.99483 ↗
10. Duerig · J. Appl. Phys. · 1986 · 59 · 331810.1063/1.336848 ↗
11. Pohl · Adv. Opt. Electron. Microsc. · 1991 · 12 · 24310.1016/B978-0-12-029912-6.50009-9 ↗
12. Williams · Appl. Phys. Lett. · 1986 · 49 · 158710.1063/1.97288 ↗
13. Credo · Chem. Mater. · 2001 · 13 · 125810.1021/cm000672o ↗
14. Martin · Appl. Phys. Lett. · 1987 · 52 · 110310.1063/1.99224 ↗
15. Prater · Rev. Sci. Instrum. · 1991 · 62 · 263410.1063/1.1142244 ↗
16. Schaller · J. Phys. Chem. B · 2002 · 106 · 848910.1021/jp020855t ↗
17. Kovacs · Proc. IEEE · 1998 · 86 · 153610.1109/5.704259 ↗
18. D.B. Kao, J.P. McVittie, W.D. Nix, K.C. Saraswat, IEEE Trans. ED-34 (1987) 1008; see also D.B. Kao, J.P. McVittie, W.D. Nix, K.C. Saraswat, IEEE Trans. ED-35 (1988) 25.10.1109/T-ED.1987.23037 ↗
19. Liu · Appl. Phys. Lett. · 1994 · 64 · 138310.1063/1.111914 ↗
20. Kim · Microelectronic Eng. · 2004 · 73 · 65610.1016/S0167-9317(04)00177-7 ↗
21. Viani · J. Appl. Phys. · 1999 · 86 · 225810.1063/1.371039 ↗
22. Paloczi · Appl. Phys. Lett. · 1998 · 73 · 165810.1063/1.122237 ↗
23. Cunningham · Sens. Actuators, A Phys. · 1995 · A50 · 14710.1016/0924-4247(96)80099-9 ↗
24. Walters · Rev. Sci. Instrum. · 1996 · 67 · 358310.1063/1.1147177 ↗