Enhanced lifetime characteristics in flexible polymer light-emitting devices by encapsulation of epoxy/silica-coated gold nanoparticles resin (ESGR)
Source abstract
Abstract
Abstract This paper reports the effects of a new multilayer encapsulation for the lifetime of flexible PLEDs on plastic substrate. The multilayer encapsulation consisted of a novel epoxy/silica-coated gold nanoparticles resin (ESGR) as the pre-encapsulation layer and a SiO2 layer as the encapsulation cap. The ESGR was prepared by mixing UV-curable epoxy resin and powders of silica-coated gold nanoparticles. The silica-coated gold nanoparticles is a necessity because the epoxy resin is not a good moisture barrier. The flexible PLEDs with multilayer encapsulation exhibited no dark spots after being stored for over 300 h at 25 °C and 60% relative humidity. Also, the operational half-luminance decay time of device was 1360 h, seven times longer than that of a device without encapsulation. These results confirmed that the multilayer encapsulation, which restricted the moisture that penetrated into the devices, could be applied to the encapsulation of flexible PLEDs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (6)
Show source-provided references
1. Affinito · Thin Solid Films · 1996 · 290 · 6310.1016/S0040-6090(96)09202-4 ↗
2. Ghost · Appl. Phys. Lett. · 2005 · 86 · 223503-1
3. Kim · Thin Solid Films · 2007 · 515 · 475810.1016/j.tsf.2006.11.030 ↗
4. Chiu · ECS Trans. · 2009 · 19 · 910.1149/1.3245137 ↗
5. Chiu · J. Electrochem. Soc. · 2008 · 155 · K18310.1149/1.2965477 ↗
6. Huang · J. Electrochem. Soc. · 2006 · 153 · D19310.1149/1.2358103 ↗