journal article·2002-04

Gradual degradation in 980 nm InGaAs/AlGaAs pump lasers

M. Bettiati, C. Starck, M. Pommies, N. Broqua, G. Gelly, M. Avella, J. Jiménez, I. Asaad, B. Orsal, J.M. Peransin

Publisher page

Abstract

High temperature (140 °C) and high current density (17 kA cm − 2 ) aging tests have been applied to InGaAs/AlGaAs 980 nm single-mode pump lasers. The use of low reflectivity ( 1%, AR) coatings on both facets leads to a symmetrical cavity configuration with relatively low power per facet emission ( 50–60 mW per facet). In this way, a quasi-uniform strongly accelerated stress is applied to the laser cavity and the normally very low gradual degradation rate becomes observable after a few hundreds hours of operation as a strong threshold current shift, while the external efficiency of the laser is almost unaffected. The degradation of the laser structure has been studied by low level I(V) curves analysis, Low Temperature (80 K) Spectrally Resolved Cathodoluminescence (LT-SRCL) and Electrical/Optical Noise (EON) techniques; the degradation seems to be longitudinally uniform and localized in the vicinity of the QW. Some laser thus degraded has been subsequently aged in more standard conditions, after applying a high reflection coating (HR) on the back facet; preliminary results of these tests are discussed. © 2002 Elsevier Science B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Integrated Circuits and Semiconductor Failure Analysis · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Fukuda · J. Quantum Electron. · 1994 · 30 · 47110.1109/3.283796 ↗
2. Okayasu · J. Appl. Phys. · 1992 · 72 · 211910.1063/1.351599 ↗
3. Fabrication, testing and reliability of semiconductor lasers II10.1117/12.273836 ↗
4. Fabrication, testing and reliability of semiconductor lasers II10.1117/12.273827 ↗
5. Chu · Appl. Phys. Lett. · 2001 · 78 · 316610.1063/1.1371967 ↗
6. I. Rechenberg et al. Proceedings of DRIP VII, Inst. Phys. Conf. Ser. 160 (1998) 479.
7. Vanzi · Microelectro. Reliability · 2000 · 40 · 175310.1016/S0026-2714(00)00192-X ↗
8. Orsal · IEEE Trans. Electron Dev. · 1994 · 41 · 215110.1109/16.333835 ↗
9. Gautier · IEEE J. Quantum Electron. · 1999 · 35 · 164010.1109/3.798087 ↗
10. Wintrebert-Fouquet · J. Appl. Phys. · 1999 · 85 · 121110.1063/1.369343 ↗
11. 40 Years of 1/f noise modelling
12. Kleinpenning · J. Appl. Phys. · 1995 · 78 · 288310.1063/1.360030 ↗
13. Hooge · IEEE Trans. Electron Dev. · 1994 · 41 · 192610.1109/16.333808 ↗
14. B. Orsal, K. Daulasim, P. Signoret, R. Alabedra, J.M. Peransin, Electrical and optical noises of strained quantum well lasers used in Erbium doped fiber amplifiers, in: P.H. Handel, A.L Chung (Eds.), Noise in Physical Systems and 1/f fluctuations, American Institute of Physics (1993) Conference Proceedings No 285, pp. 466–470.10.1063/1.44690 ↗
15. Xu · J. Appl. Phys. · 1983 · 54 · 453610.1063/1.332654 ↗